Reviews Nylon Glass Filament

BOMEI PACK Fiber Reinforced Packing Tape, Clear Bi Directional Filament Strapping Tape 3Inch x 55yds 6.7Mil, Total 110yds

  • ✔5.3 mil thickness clear filament duct tape, thick enough, better adhesion, strong bonding. It is perfect for heaviest, toughest tasks that need industrial grade adhesion, strong holding power. Cut by scissors..
  • ✔Transparent filament strapping tape with smooth surface is perfect for packing, strapping, fixing, reinforcing, repairing and palletizing..
  • ✔With Special formulated, straight filament packing tape adhere to variety of surfaces: glass, wood, plastic, metal, fiberboard, nylon, cardboard etc....
  • ✔Filament reinforced packing tape with weatherproof, moist resistant, UV and temperature resistant, suitable for most repairs, green house and outdoor use..
  • ✔Filament fiber reinforced tape is ideal for furniture maintenance, heavy duty packing, carton sealing, carpet fixing, toy& vehicle patching, repairing and protecting..
Check Stock

Inland Glass PLA 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Transparent Glass Filaments, Yellow Glass

  • GLASS PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • GLASS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 190°C - 210°C (374°F - 410°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND GLASS PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland Glass PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print..
  • EASY-TO-USE: The Inland Glass PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • HIGH-QUALITY GLASS PLA: Glass PLA filament is non-toxic, the mater....
Check Stock

YXPOLYER Super Tough Easy Print Nylon Filament 1.75,3D Printer Engineering Filament,Strong & Tough & Heat Resistant&Corrosion Resistance&Good Abrasion&Good Aging Nylon Filament,1kg Spool,White

  • ★【YXPOLYER Nylon Filament 1.75】YXPOLYER Nylon is a high-strength modified Nylon printing material. It is super tough, high-strength, easy to print, and has excellent temperature resistance, up to 120°C or higher. Nylon lends itself well to things like living hinges and other functional parts..
  • ★【Super Tough Easy Print Nylon Filament】YXPOLYER nylon Filament has Good toughness, impact strength is more than 10 times that of ordinary PLA.
  • Corrosion resistance, can withstand most organic solvents.
  • Good abrasion resistance and good aging resistance；Suitable for automotive industry signal lamp bases, fuel dispensers, surface mount devices in the electronics and electrical markets, and household products, etc..
  • ★【Printing conditions】We recommend print the Nylon filament at a Printing temperature of 220℃-280℃, bed temperature of 80-100°C.Dimensional Accuracy +/- 0.04mm. YXPOLYER filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
  • ★【Unique Package】Our packaging is vacuum sealed with semi-aluminum foil bags,which can better isolate air and water molecules.We use a transparent plastic film to adhere to the surface of the box by hot pressing, so that the periphery of ou....
Check Stock

Raise3D Pro3 Dual Extruder 3D Printer

  • Huge Build Volume: Single: 11.8" × 11.8" × 11.8" Dual: 10" × 11.8" × 11.8".
  • Maximum Nozzle Temp: 300ºC, Max Build Plate Temp120ºC. Prints with a Variety of Materials up to 300ºC Including: PLA/ ABS/ HIPS/ PC/ TPU/ TPE/ PETG/ ASA/ PP/ PVA/ Nylon/ Glass Fiber Infused/ Carbon Fiber Infused/ Metal Fill/ Wood Fill.
  • Auto Bed Leveling & Flexible Build Plate. Fully Enclosed with Air Flow Manager & Automatic Pausing with Door/Lid Sensors.
  • Interchangeable Hot End and Extruder Cover, Z-axis rod stiffness increased by 75% to deliver a more stable performance..
  • Note: 3D Printlife filament profiles are loaded in Raise3D’s Open Filament Program, for questions on filament settings or compatibility please customize please reach out to 3D Printlife..
Check Stock

Raise3D Pro3 Plus Dual Extruder 3D Printer

  • Huge Build Volume: Single: 11.8" × 11.8" × 23.8" Dual: 10" × 11.8" × 23.8".
  • Maximum Nozzle Temp: 300ºC, Max Build Plate Temp120ºC. Prints with a Variety of Materials up to 300ºC Including: PLA/ ABS/ HIPS/ PC/ TPU/ TPE/ PETG/ ASA/ PP/ PVA/ Nylon/ Glass Fiber Infused/ Carbon Fiber Infused/ Metal Fill/ Wood Fill.
  • Auto Bed Leveling & Flexible Build Plate. Fully Enclosed with Air Flow Manager & Automatic Pausing with Door/Lid Sensors.
  • Interchangeable Hot End and Extruder Cover, Z-axis rod stiffness increased by 75% to deliver a more stable performance..
  • Note: 3D Printlife filament profiles are loaded in Raise3D’s Open Filament Program, for questions on filament settings or compatibility please customize please reach out to 3D Printlife..
Check Stock

taulman3D Nylon 230 3D Printing Filament Black - 1.75mm (1kg)

  • Nylon 230 3D Printing Filament Prints Easily at 230C, Allowing You to Use It On Any 3D Printer.
  • Nylon Filament for 3D Printing. There Are Some Great Nylons Out There for 3D Printing But Many of Them Cost A Lot. Nylon 230 is the Affordable taulman3D Nylon and The First to Print at 230C.
  • Made in America. The Supply Chain of taulman3D Products is Different Than Your Standard Filament Maker. Every Roll is Manufactured in the US..
  • 1.75mm Diameter Nylon 3D Printing Filament Which Prints Easily at 230C.
  • 1kg Spool. Consistent Diameters Checked by Laser Technology.
Check Stock

6PACK Reinforced Packing Tape, 5.5Mil 2Inx 60Yds, Heavy Duty Fiber Strapping Adhesive Packaging Tape, BOMEI PACK

  • ✔5.5 mil thickness clear reinforced packing tape, thick enough, better adhesion, strong bonding. It is perfect for heaviest, toughest tasks that need industrial grade adhesion, strong holding power. Cut by scissors..
  • ✔Transparent filament strapping tape with smooth surface is perfect for heavy duty goods packing, strapping, fixing, reinforcing, repairing and palletizing..
  • ✔With Special formulated, straight filament packing tape adhere to variety of surfaces: glass, wood, plastic, metal, fiberboard, nylon, cardboard etc....
  • ✔Fiber reinforced adhesive packing tape is weatherproof, moist resistant, UV and temperature resistant, suitable for most repairs, green house and outdoor use..
  • ✔Filament fiber reinforced tape is ideal for furniture maintenance, heavy duty packing, carton sealing, carpet fixing, toy& vehicle patching, repairing and protecting..
Check Stock

eSUN Carbon Fiber Filled Nylon Filament 1.75mm, PA CF 3D Printer Filament, 1KG Spool 3D Printing Filament for 3D Printers, Natural

  • 【Heat Resistance Carbon Fiber Filled Nylon】80% Nylon Coupled with 20% Carbon Fiber, which makes it has higher rigidity and strength than normal nylon filament. Good Toughness. Wear Resistance and Tear Resistance. High Precision & Low Shrinkage. Creep Resistance and less warpage. Heat Resistance 120°C. Flame Retardance UL94-V2. Matte Printed Surface..
  • 【Clog-free & Bubble-Free & Less-tangle】Full mechanical winding and strict manual examination ensure tangling free and avoid filament breaking and snapping.eSUN Carbon Fiber Filled Nylon filament is orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder.It does not overlap or tangle,no cracking..
  • 【Wide Application】Compatible with most of FDM 3D Printers that use 1.75MM filament and suitable for making both strong and flexible industrial parts, prosthetics, medical equipment and complex costumes etc.Recommend Carbon Fiber Nylon filament extrusion / Nozzle temperature 260℃-290℃, bed 45℃-60℃.Due to its unique attribute of abrasiveness, we recommend to use a 0.6mm or larger stainless steel nozzle instead of regular soft metal nozzles..
  • 【Stable Dimensional Tolerance】3D printer filaments are produced with high precise specification and have a toler....
Check Stock

YXPOLYER Lightweight high Strength PA6 Carbon（Chopped Carbon Fiber），1.75mm 3D Printer Filament,Nylon6 Engineering 3D Printing Materials,tensile Strength Increased 50%，250g Spool,Black

  • ★【Nylon-CF15 3D printer Filament】YXPOLYER Nylon-CF15 is a chopped carbon fiber filled high-performance thermoplastic. The material is made of a mixture of nylon and carbon fiber. It has the characteristics of light weight and high strength. It can be applied to light molds and functional prototypes,Production parts and tool applications..
  • ★【Features & applications】 Carbonfiber reinforced nylon； High tensile strength（Tensile strength: 58MPa） and rigidity（Flexural modulus: 3593MPa ）； Excellent chemical and thermal resistance；Strong layer bonding；Suitable for the automotive industry, sporting goods, aerospace and other fields, such as oil-free bearings, sports equipment and flight equipment, etc..
  • ★【Printing conditions】We recommend print the Nylon-CF15 filament at a Printing temperature of 220℃-280℃, bed temperature of 80-100°C..
  • ★【1.75mm engineering Filament Diameter】Dimensional Accuracy +/- 0.04mm. YXPOLYER filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
  • ★【Vacuum packaging】 Complete drying for 24 hours before vacuum packaging, which can effectively protect the filament from moisture. Note points for printing and storage of engineering ....
Check Stock

Filament Dryer Box,Upgrade FilaDryer S2 Dry Box,SUNLU Dry Box for 3D Printer Filament,Keep 3D Filament No More Brittle/String/Poor Adhesion,Large-Size Touch Screen,Real-time Humidity Display,Black

  • 【Dryer box keep filament dry, 360° even heating】SUNLU S2 filament dryer box, say goodbye to poor 3D printing by damp filament.Dust-free, moisture-free, 360° heating. SUNLU S2 filament dryer has two heat-sinks on top and bottom to provide even heating. Keep the 3D printer filament dry,no more brittle/string/poor adhesion,print smoothly..
  • 【Adjustable temperature up to 70℃, Adjustable time】Users can adjust the temperature of the dryer box according to different 3D filament types, ambient temperature, humidity and other factors. Adjustable temperature range is 35℃-70℃. Drying time of the filament dryer box is adjustable. The adjustable range of time is 0-99 hours. S2 dryer box can automatic sleep standby after drying..
  • 【Large LCD touch screen, easy to operate dryer box】S2 dryer box has a 3.42*2.87-inch LCD touch screen, touch reaction time less than 0.1 seconds. Dryer box with sensitive response, provide the tablet-like smooth experience. One-Click operation, provide suggested parameters for different 3D filament. Easy operation, make the filament keep drying during 3D printing..
  • 【Real-time humidity display, visualization of filament drying】S2 dryer box has a high-precision humidity detection sensor, displaying real-time humidity ins....
Check Stock

3D Printer Filament Dryer Box, SUNLU FilaDryer S2 for 3D Printing, 360° Surround Heating, Touch Screen, Real-time Humidity Display, Dryer Box for Nylon PA ABS PLA PETG Filament 1.75/2.85/3.00mm, Black

  • 【360°Embracing Heating, Rescue Poor Printing】 As an upgraded product, the S2 drying box adopts a double heating element structure, which heats up faster and evenly heat. The 3D filament dry box S2 has added upper and lower heating plates to achieve all-round surrounding heating and rapid drying. Keep the 3D printer filament dry, no more brittle/string/poor adhesion,print smoothly..
  • 【Extended adjustable temperature range, Longer continuous drying time】 Compared with SUNLU dryer box S1, SUNLU FDM 3D Filament Dryer S2’s adjustable temperature range is 35℃-70℃. Drying time of the filament dryer box is adjustable. The adjustable range of time is 0-99 hours. S2 dryer box can automatic sleep standby after drying..
  • 【One-click personalization, Remember Your Operation】 New 3.42*2.87inch touch screen, tablet-like operation experience. One-key switching between ℃ and ℉. According to various filament, user-friendly one-key recommended temperature setting. The settings before the shutdown will be remembered until you change settings again..
  • 【Real-time humidity detection, Visualization of dry conditions】 Built-in high-precision humidity detection sensor, displaying real-time humidity inside the filament dryer. The change of the LED lamp ring....
Check Stock

taulman3D 1.75mm Alloy 910 Nylon 3D Printer Filament Consumable, Polyamide (PA) 1lb Spool, Fits Nearly All FDM 3D Printers (Natural)

  • EXTRA-DRY: vacuum resealable ziploc bag with silica gel to protect filament from humidity and dust..
  • STRONGEST: premium filament with high tensile strength for extremely robust and heavy duty components..
  • PREMIUM: Premium Nylon 6 (PA6) printing filament for engineering applications..
  • COMPATIBLE: Nylon filament for most open material 3D printers with enclosed chamber..
  • ONLINE SUPPORT: We're here to help! Contact us or visit our support center. Satisfaction !.
Check Stock

Gizmo Dorks 1.75mm Nylon Filament 1kg / 2.2lbs for 3D Printers, Black

  • Industrial Strength Nylon Filament for Desktop 3D Printing. Alloy 910 is Trusted By the World's Leading Aerospace and Automotive Companies for High Performance 3D Printing.
  • 1.75mm Diameter 3D Printing Filament. Perfect for All 1.75mm 3D Printers. Recommended Extrusion Temperature: 250-255C. Trusted taulman3D Nylon. There is 1lb worth of printing material on the spool..
  • Made in America Spools, Ensuring You Can Trust That Quality and Consistency is of the Utmost Importance. This is a 1lb roll of 3d printing material..
  • Trusted By Leading Industrial and University Clients Around the World. Alloy 910 a Top Tier Nylon Filament for Desktop 3D Printing..
  • Materials Made by taulman3D Are Some of the Most Trusted and Utilized 3D Printing Filaments Worldwide..
Check Stock