Reviews Nylon 3d Printer Nozzle

Wangdd22 15pc/Set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
  • Quanlity:15pcs/lot (5 piece 1.75mm Nozzle Inputting Tube,5 piece 3D Printer 0.4mm Extruder Brass Nozzle Print Head,5 piece Heater Blocks Hotend).
Check Stock

Onyehn 22pcs/Lots A8&A2 3D Printer Part Each 5PCS 0.4mm Extruder Nozzle Print Head+1.75mm Teflon Throat Tube+Heater Blocks Hotend for MK8 Makerbot Reprap

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
  • Quantity:22pcs/lot (5x 3D Printer Nozzle Throat Tube 5x Nozzle Print Heads 5x Heater Blocks Hotend 5x M6 nuts 2x Hex Key Wrenches (for MK8 Makerbot....
Check Stock

Tattoos

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing tem....
Check Stock

The Cheap Detective

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing tem....
Check Stock

Introduction to Play Analysis

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing tem....
Check Stock

KIMME 1pcs Build Plate for Flashforge Finder 3D Printer

  • Flashforge Adventurer 3C, as a stripped-down version of Adventurer 3, remains main functions, making it a super cost-effective leveling-free 3d....
  • Out of the box,leveling-free, removable and heating bed,much easier to take down models.It's suitable for various 3d printer filament PLA,ABS,PETG....
  • Slide-in build plate allows you to draw it out of the printer and then remove the finished 3D prints more easily . at the same time , it can minimize....
  • Detachable nozzle & fast heating: remove the nozzle from extruder just in one push.
  • Flashforge 3d printer Adventurer 3C,12 months warranty, lifetime technical assistance and 24 hours professional customer service.
Check Stock

Creality 3D Hardened Steel MK8 Nozzle with High Temperature Resistance Upgraded Tungsten All Metal Nozzle Ends for Makerbot Ender 3 / Ender 3 S1, CR-10 Series, 0.2/0.3/0.4/0.5/0.6 mm (5pcs in One Set)

  • ...brass nozzles，which makes it durable accurate and compatible with more filaments..
  • [High Temperature Resistance ] The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high temperature, compatible material from PLA,ABS to carbon fiber, even PEEK..
  • [High Precision] these 3D printer nozzles keep stable temperature during printing let the filament out evenly, create more perfect printer item than normal metal nozzle. Also with higher print speed in same print precision.Not easy clog during printing, easy to clean. Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
  • [Applicability and Compatibility] Our Creality Ender-3 S1 Nozzles suit to almost all FDM printer,could install to MK8 heating block. Our tungsten nozzles fit for 3D Printer Makerbot Creality Ender 3 series and CR-10 series 3D printer, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original..
  • [Package] Package comes with 5 pieces of black different size MK8 nozzles, the size is 0.2mm/0.3mm/0.4mm/0.5mm/0.6mm, sufficient quantity and size to facilitate your timely replace....
Check Stock

16 Pieces 3D Printer Nozzle Wrench Cleaning Kit,10 Nozzle Cleaning Pins with Storage Box 2 Tweezers 2 Cleaning Copper Wire Brushes 2 L-Shaped Wrench Tool for 3D Printer Accessories

  • 3D printer nozzle cleaning kit: you will get 10 pieces stainless steel nozzle cleaning pins in 5 sizes, 2 pieces cleaning copper wire brushes in....
  • Nozzle cleaning pins: there are 5 different sizes, including 0.15 mm, 0.25 mm, 0.35 mm, 0.4 mm and 0.5 mm, allowing you to choose according to your....
  • Cleaning copper wire brush: the brush is suitable for 3D printer nozzle hot bed cleaning and rust removal.
  • When you use 3D printer nozzle brush to....
  • Wrench and tweezer: 6 mm 7 mm L-shaped hexagonal wrench tool can be applied for fastening nozzles, and 6 mm wrench is compatible with mk8 nozzle.
  • Quality material: cleaning pins are made of stainless steel, and wire brushes are made of copper wire, sturdy and flexible, not easy to break and....
Check Stock

3D Printer Nozzle Cleaning Kit - 13 Pieces 3D Print Tools 0.4mm Pin and Tweezers with Stainless Steel Wire Brush

  • Function: 3D printer accessories is perfect for removing the blockage with high precision and is also suitable for the general maintenance of the....
  • Compatibility: These 3D printer tool kit are compatible with most popular 3D printers, fit most 3D printers nozzles.
  • Uses: 1. Before use the 3D printer cleaning kit, it is recommended to heat the nozzle to 200 degrees or above (pay attention to prevent scalding).
  • Material: High quality stainless steel, the pin tip is smooth and sharp with high strength and toughness, suitable for mild maintenance of nozzle and....
  • Package contents: you will receive 10 pieces of stainless steel nozzle cleaning pins, 1 storage box, 1 copper wire cleaning brush, 2 pieces of....
Check Stock

eSUN Cleaning Filament 1.75mm, 3D Printer Cleaning Filament, Prevent Nozzles and Extruders Clogging, 100g Spool 3D Printing Filament for 3D Printers, Natural

  • 【Cleaning Filament】Environmentally Friendly and Non-toxic. Keep your 3D printer nozzle in good health, clean between different material and color changes to extend nozzle life..
  • 【Prevent from Clogging】Designed to adhere to any stray material left in the nozzle and remove it along with the cleaning filament. It can clean a variety of 3D printer materials..
  • 【Easy to Use】Wide Cleaning Temperature Range 160°C-300°C. Clean the nozzle and extruder of 3D printer regularly, ensure feed smoothly and constantly without clogging..
  • High Compatibility】Perfect for multiple material including PLA, ABS, PETG etc. 100g(0.22 lbs) 3D printer cleaning filament is vacuumed sealed and comes with desiccant.PLEASE NOTICE THAT CLEANING FILAMENT CANNOT PRINT AS NORMAL FILAMENT..
  • 【When to Use】Before and after printing, change matrial with different melt point, colors and properties for better extruder protection and printing effect.With a certain level of adhesive ability, adhesive accumulated residual filaments and take them out to clean the interior extruder..
Check Stock

Easythreed X1 FDM Mini 3D Printer for Beginners, Your First Entry-Level 3D Printer, High Printing Accuracy, New Upgraded Extruder Technology, Printing Volume 100x100X100MM…

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best pr....
Check Stock

20PCS 0.4mm MK8 Nozzles 3D Printer Extruder Nozzles + 10PCS Stainless Steel Nozzle Cleaning Needles with 2PCS Wrenches and Tweezers for Makerbot Creality CR-10 Ender 3 5

  • Package Include: This 3D printer nozzle set come with 20pcs 0.4mm printer nozzles, 10pcs 0.35mm nozzle cleaning needles, 1pcs curved tweezers, 1pcs socket wrench and 1pcs flat wrench.
  • Cleaning Needles: The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect to handle tough extruder hot end nozzle clogs.
  • Premium Material: Our MK8 extruder nozzles are made of high quality brass material. Heavy duty and durable to use for a long time. Easy to install and change.
  • Applicability and Compatibility: These MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
Check Stock

Creality 10 Packs 3D Printer Hardened Steel MK8 Nozzles, Upgraded Tungsten All Metal Extruder Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm for Creality Ender 3 Ender 3 V2 Ender 3 pro CR-10

  • ...max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high temperature, compatible with material such as PLA, ABS to carbon fiber, even PEEK..
  • [High Precision More Than Your Imagination] - Keep stable temperature during printing, let the filament out evenly, create more perfect printer item than normal metal nozzle. Also with higher print speed in same print precision. Avoid clog during printing, easy to clean. Made with centering CNC precision automatic lathe and with one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
  • [Applicability & Compatibility] - Our Creality Nozzles are compatible with almost all FDM printer, also fits for MK8 heating block. Our tungsten nozzles are also designed for 3D Printer Makerbot Creality Ender 3 series and CR-10 series 3D printer, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original..
  • [Package] Package comes with 10 pieces of different size MK8 nozzles, include 8 pcs brass nozzles (0.2/0.3/0.5/0.6mm each 1pcs, 0.4mm nozzle 4 pcs)+ 2pcs black hardened steel nozzles 0.4mm. NOTE: Small accessories, please keep away from children..
Check Stock