Reviews Nut Thread Rod

Prime-Line 9051696 Binding Posts and Screws, Truss Head, Slotted Drive, 3/16 inch X 1/4 inch, Aluminum, (50-pack)

  • SIZE: Male Thread Size(Screw): M6 x 10mm(D*L).
  • Female Thread Size(Top): M6 x 12mm(D*L)..
  • APPLICATION: It is ideal for thin albums, decorative bags, leather belts, sandals, boots, leather bags, helmets, etc.Fit for all kinds of art and leather crafts and DIY clothing production..
  • INSTRUCTIONS: Make a hole larger than 0.5mm than the diameter of the nut rod, put screws and nuts on both sides of the locked object, and select the appropriate tool to lock it..
  • NOTICE: Use post screws to lock, the thickness of the lock must be less than the length of the screw rod + nut rod, otherwise, it will not be locked..
  • ADVANTAGE: Precision mechanical thread, made of high-quality stainless steel material,anti-rust. Our screws are an important addition to any leather clothing or accessories..
Check Stock

12 Pack 8/32 Inch M4 Threaded Rod with Hex Nuts 12 Pcs M4 Stainless Steel Threads Studs Rods 12 Pcs M4 Stainless Steel Fully Threaded Hex Nuts for Beaded Garden Stake Rods (12 Inch)

  • Ample Quantity: the package comes with 12 pieces of 8/32 inch M4 12 inch threaded rods and 12 pieces of M4 hex nuts, a total of 24 pieces, a nice set is ideal for making a dozen (fairy garden stakes)fairy garden stakes or the other projects.
  • Dimension: the threaded rod is about M4 in thread diameter, 300 mm/ 12 inch in total length.
  • The hex nut is about M4 in coarse thread diameter, 0.7 mm/ 0.03 inches in pitch, 0.28 inch/ 7 mm in width across flat, and 0.11 inch/ 2.8 mm in height.
  • Threaded Rods Studs: the 8/32 threaded rod is made of 304 stainless steel, safe, sturdy, with corrosion resistance and antirust ability, and can offer you a long time service.
  • It can be applied for assembly fastening, just screw it into threaded nuts or tapped holes.
  • Hex Nut: the hex nut is an ideal replacement for industrial and construction fasteners and an essential accessory in your daily life, simply screwing it onto a bolt, cap screw or threaded rod of the same thread size, quick and easy.
  • Widely Applicable: these fairy stake rods can be widely applied to bolts, clamps, hangers and U bolts and many....
Check Stock

Awclub Screw Post Fit for 5/16 8mm Hole Dia Male M6x12mm Belt Buckle Binding Bolts Leather Fastener Carbon Steel Silver 10 Sets

  • APPLICATION: It is ideal for thin albums, decorative bags, leather belts, sandals, boots, leather bags, helmets, etc.Fit for all kinds of art and leather crafts and DIY clothing production..
  • INSTRUCTIONS: Make a hole larger than 0.5mm than the diameter of the nut rod, put screws and nuts on both sides of the locked object, and select the appropriate tool to lock it..
  • NOTICE: Use post screws to lock, the thickness of the lock must be less than the length of the screw rod + nut rod, otherwise, it will not be locked..
  • ADVANTAGE: Precision mechanical thread, made of high-quality stainless steel material,anti-rust. Our screws are an important addition to any leather clothing or accessories..
Check Stock

¾ RH XM12 4130 Chromoly Rod End Heim Joint Steering Shaft Support, Spherical Rod End, 3/4-16 in Right Hand Male Thread, Jam Nut

  • XM12 Chromoly Rod End, Heim Joint, Spherical Rod End, 3/4-16 Right Hand Male Thread, W/ Jam Nut.
  • Kit includes one rod end and one steel jam nut..
  • Chromoly 4130 Body Male Rod End With ¾-16 Right Hand Threads with a ¾ Bore.
  • Steering shaft support, 4 link suspension, 3 link suspension, Tie Rod.
Check Stock

Angle Grinder Extension 5/8-11, 2 pcs 4-1/2 Inch Angle Grinder Lengthen Connecting Rod , 45# Black Steel Material, Seamless Docking, Easy Installation 80 mm *1 And 120 mm * 1

  • Angle Grinder Extension Connecting Rod Size: 【Important】Before buying, please check the size, Fit for a spindle size of 5/8" - 11" and FIT FOR MOST 4-1/2"-5" Grinding Wheels, Inner thread 5/8" - 11", Outer thread 5/8" - 11",Overall length 80 mm * 1 + 120 mm * 1.
  • Great for Deep Areas: The rotating extension shaft to use conveniently with 5/8" 11 threaded power tools. Can be used for grinding and polishing deep stones such as inside corners and special shapes..
  • Easy To Install: ①Install the extension rod ②install the Grinder Inner Flange Nut ③install the Grinding Wheels ④install the Grinder Outer Flange Nut ⑤use the Spanner to fix the Grinder Outer Flange Nut..
  • Material: Made of high quality carbon steel, more strength and resistance to deformation.The 2022 upgrade model improves the shortcomings of the previous product's shaking..
  • Package Includes and Transportation : Angle Grinder Extension Connecting Rod *2 , Packaging: special plastic box packaging,We use the fastest express, usually 10-15 days to complete the delivery..
Check Stock

Yinpecly Butt Screw 6x12 Nut 6x12 Screw Stainless Steel Screw Binding Screws Posts for Scrapbook Photo Albums Binding and Leather Saddles Purses Belt Repair 5PCS

  • SIZE: Male Thread Size(Screw): M6 x 12mm(D*L).
  • Female Thread Size(Top): M6 x 12mm(D*L)..
  • APPLICATION: It is ideal for thin albums, decorative bags, leather belts, sandals, boots, leather bags, helmets, etc.Fit for all kinds of art and leather crafts and DIY clothing production..
  • INSTRUCTIONS: Make a hole larger than 0.5mm than the diameter of the nut rod, put screws and nuts on both sides of the locked object, and select the appropriate tool to lock it..
  • NOTICE: Use post screws to lock, the thickness of the lock must be less than the length of the screw rod + nut rod, otherwise, it will not be locked..
  • ADVANTAGE: Precision mechanical thread, made of high-quality stainless steel material,anti-rust. Our screws are an important addition to any leather clothing or accessories..
Check Stock

40 Sets Furniture Board Cam Fitting with Dowel and Pre-Inserted Nut, 3 in 1 Cam Lock Nuts for Cabinet Drawer Dresser and Wardrobe Furniture Panel Connecting (Dowel M6x36mm, Cam Fitting ¢15x13mm)

  • [SPECIFICATIONS] Cam fittings: diameter 15mm (0.59"), height 13mm (0.51"). Connecting rod bolts: total length 36mm (1.41"), thread length 9mm (0.35"), thread diameter 6mm (0.24"). Plastic nuts: diameter 10mm (0.39"), height 9mm (0.35").
  • [MATERIAL] Pre-assembled nuts are made of plastic, cam fittings are made from aluminum alloy, and connecting rod bolts are made from high quality zinc alloy with nickel plated on the surface, they have good corrosion resistance, rust resistance, high hardness and stable structure to ensure long service life..
  • [APPLICATION] The perfect partner for installing furniture, they can make the vertical connection between furniture panels. They can be applied to board wardrobes, shoe cabinets, drawers, cabinets, bed cabinets, etc., especially particle board and particle board..
  • [EASY TO USE] Super easy to install and remove, they save you a lot of time and energy. 1. Knock the plastic pre-insertion nut into a target position on the plate one. 2. Use a cross screwdriver to screw the connecting rod nut into the pre-assembled nut on the plate one. 3. Aligh the hole of plate two with the connecting rod bolt and place it on the plate one, then tighten the cam fitting clockwise to tighten the connecting rod bolt..
Check Stock

uxcell 4 PCS M2/2mm 15mm Linkage Rod End Tie Rod End Ball Head Joint Adapter Black for RC Crawler Boat

  • FEATURES: Total length:15mm/0.59 inch, Bottom Thread: M2 (Fit for tie rod with M2 thread) Ball head hole diameter: 2mm (fit M2 screw and nut ).
  • SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models..
  • ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive.
  • PLEASE NOTE: the bottom hole with thread.it is not a self-tapping hole. Please allow 1-3mm differences due to manual measurement.
  • PACKAGE CONTENT: 4 Pcs x Rod End Tie Rod End Ball Head Joint.
Check Stock

CCC, French Press 5 Part Stainless Steel 3.75 Inch Wide Plunger Assembly For Flat Top 34 oz 8-Cup 1 Liter Coffee Press Replacement Part

  • ...zil models, Veken, Mueller, Secura, Café Du Chateau, Coffee Gator, Clever Chef, Utopia Kitchen & other flat lidded "8-Espresso Cup" 32|34oz French Press coffee makers.
  • Not OEM Bodum, Compatibly Manufactured by CCC for flat lidded 1 Liter French Press Coffee Makers.
  • [DIRECTIONS FOR USE] Take apart your old plunger & thread the rod into the hole on you flat lid.
  • Carefully start the finely threaded nut with rounded opening on top – if it gets “cross threaded” it will get stripped.
  • spiral plate first, mesh filter sandwiched with cross plate below & thread the stem of the cross plate over the rods end, screw the closed nut snugly down (it will rest on your spiral plate)..
  • [GOOD QUALITY MATERIALS] 304 GRADE Stainless Steel (SS) PLUNGER ROD with closed nut, cross plate with threaded stem, spiral plate, one 18/8 SS wire mesh filter with a SS plunging knob.
  • Try CCC's 34oz Replacement Glass - it's FIRE TOUGHENED with measures.
  • Also Filter Parts, Cross, Filter and Spiral plate assemblies.
  • and Pour Over options to use on your press carafe coming soon..
Check Stock

Angle Grinder Extension Shaft Set, 80 mm ,120 mm,5/8"-11 Thread Connecting Rod for 4-1/2 Angle Grinder ,Rotary Polisher,Car Polisher,45# Steel Material, Seamless Docking, Easy Installation

  • Angle Grinder Extension Connecting Rod Size: 【Important】Before buying, please check the size, Fit for a spindle size of 5/8" - 11" and FIT FOR MOST 4-1/2"-5" Grinding Wheels, Inner thread 5/8" - 11", Outer thread 5/8" - 11",Overall length 75mm (2.95nch).
  • Great for Deep Areas: The rotating extension shaft to use conveniently with 5/8" 11 threaded power tools. Can be used for grinding and polishing deep stones such as inside corners and special shapes..
  • Easy To Install: ①Install the extension rod ②install the Grinder Inner Flange Nut ③install the Grinding Wheels ④install the Grinder Outer Flange Nut ⑤use the Spanner to fix the Grinder Outer Flange Nut..
  • Material: Made of high quality black carbon steel, more strength and resistance to deformation.The 2022 upgrade model improves the shortcomings of the previous product's shaking..
  • Function: By using the Angle grinder extension connecting rod, the functionality of the angle grinder can be expanded and a foundation can be laid for using other attachments..
Check Stock

Aopin Scrapbook Photo Albums Screw Post Fit for 5/16\(8mm) Hole Dia, Male M6x10mm Belt Buckle Binding Bolts for Binding Leather Saddles Purses Belt Repair Carbon Steel Spraying, Black, 10 Sets

  • Applicable Hole Dia: 5/16"(8mm), Head Dia: 12.8mm, Thread Specification: M6.
  • Male Thread 10mm, Female Thread 12mm, Hex Socket Specification 4mm..
  • It is the ideal choice for thin albums, decorative bags, belts, leather collars, sandals, boots, leather bags, helmets, etc. Suitable for all kinds of art and leather crafts as well as DIY clothing making. also used for fastener connection of beds, tables, chairs and other furniture..
  • Use a drill or puncher within 0.5mm larger than the diameter of the female rod to open the hole, put the screw and nut on both sides of the locked object, then use hexagon wrench to lock it..
  • Feature precision mechanical thread, made of stainless steel material, anti-rust..
  • The thickness of the locked object must be less than 95% of the total length of the screw and nut rod, otherwise it will not be tightened..
Check Stock

6 Pieces 8/32 Inch M4 12 Inch Threaded Rod with Hex Nuts Set Includes 6 Pcs M4 x 300 mm 304 Stainless Steel Fully Threads Studs Rods and 6 Pcs Thread Hex Nuts for Beaded Garden Stake Rods

  • What You Will Get: the package comes with 6 pieces of 8/32 inch M4 12 inch threaded rods and 6 pieces of M4 hex nuts, 12 pieces or 6 set in total, nice combinations for you to make 6 pieces of fairy garden stakes, as well as other DIY crafts.
  • Detailed Size: threaded studs: thread diameter is M4, and measures approx. 300 mm/ 12 inch in fully length.
  • Hex nut: the coarse thread diameter is M4, pitch: 0.7 mm/ 0.03 inches, flat across width: 7 mm/ 0.28 inch and about 2.8 mm/ 0.11 inch high.
  • Threaded Rods Studs: the threaded steel rod is made of quality 304 stainless steel material, sturdy, and resistant to rust or corrosion, with strong construction, hard to deform or break, which can be applied for a long time, and ideal accessories for assembly fastening, just screw into the threaded nut or threaded hole.
  • Hex Nut: the hex nut can be screwed to this threaded rod well, not easy to slip off, besides, it is also an ideal accessory for fasteners, it is also essential in daily life, just need to screw it to the thread metal rods, bolts and other tools of the same size are fine.
Check Stock

Aopin Scrapbook Photo Albums Screw Post Fit for 0.2inch 5mm Hole Dia Female M4x20mm Butt Screw for Binding Leather Saddles Purses Belt Repair Carbon Steel Nickel Plating Silver 20 Sets

  • Applicable Hole Dia: 0.2inch(5mm), Head Dia: 9.5mm, Thread Specification: M4.
  • Male Thread 8mm, Female Thread 20mm, Drive System: Cross, Slot, Head Type: Round Washer..
  • It is the ideal choice for thin albums, decorative bags, belts, leather collars, sandals, boots, leather bags, helmets, etc. Suitable for all kinds of art and leather crafts as well as DIY clothing making. also used for fastener connection of beds, tables, chairs and other furniture..
  • Use a drill or puncher within 0.5mm larger than the diameter of the female rod to open the hole, put the screw and nut on both sides of the locked object, then use cross screwdriver to lock it..
  • Anti-skid tooth design, precision mechanical thread, carbon steel nickel plating, high hardness, corrosion resistance, environmental and non-toxic..
  • The thickness of the locked object must be less than 95% of the total length of the screw and nut rod, otherwise it will not be tightened..
Check Stock