Reviews Numerical Hydraulic Die Forging

AMZCNC Hydraulic Hand Crimper Tool for Stainless Steel Cable Railing Fittings for 1/8" 3/16" Cable –Wire Swaging Tool 8 Ton and Stainless Steel Cable Cutter

  • Compatibility : Crimps 12 AWG to 2/0 AWG size copper and aluminum wires. Maximum crimping power:10 tons. Stroke : 12mm. The hydraulic crimper is suitable for power wires, electrical cables, battery cables and welding cables. Cable Cutter Cuts up to 5/32" stainless steel cable..
  • Material: Made of durable materials with high strength and good toughness. Dies are made of hardened steel with chrome finish.Vinyl-dipped grip for comfort and easy control. Cable Cutter: Using SK5 high carbon steel Seiko forging, durable..
  • Size: Hydraulic Hand Crimper Tool: Length:approx.12.2 inches, Weight:approx.N.W3.8lb G.W6.6lb. Cable Cutter: 8.1 x 2.8 x 1.4 inches, Weight:11.2 ounces..
  • Easy to use: On/Off control for fast operation, easy crimping and arm retraction when crimping aluminum or copper wire. A return spring is installed on the handle for easy one-handed operation of the tool.The C-style head makes side entry easier to change the dies..
  • What you get: Includes die positioning pin, seal rings, strong protective carrying case, cable cutter and pair of work gloves..
Check Stock

AMZCNC Hydraulic Hand Crimper Tool for Stainless Steel Cable Railing Fittings for 1/16" 1/8" 3/16" 1/4" Cable –Wire Swaging Tool 8 Ton and Stainless Steel Cable Cutter

  • Compatibility : Crimps 12 AWG to 2/0 AWG size copper and aluminum wires. Maximum crimping power:10 tons. Stroke : 12mm. The hydraulic crimper is suitable for power wires, electrical cables, battery cables and welding cables. Cable Cutter Cuts up to 5/32" stainless steel cable..
  • Material: Made of durable materials with high strength and good toughness. Dies are made of hardened steel with chrome finish.Vinyl-dipped grip for comfort and easy control. Cable Cutter: Using SK5 high carbon steel Seiko forging, durable..
  • Size: Hydraulic Hand Crimper Tool: Length:approx.12.2 inches, Weight:approx.N.W3.8lb G.W6.6lb. Cable Cutter: 8.1 x 2.8 x 1.4 inches, Weight:11.2 ounces..
  • Easy to use: On/Off control for fast operation, easy crimping and arm retraction when crimping aluminum or copper wire. A return spring is installed on the handle for easy one-handed operation of the tool.The C-style head makes side entry easier to change the dies..
  • What you get: Includes die positioning pin, seal rings, strong protective carrying case, cable cutter and pair of work gloves..
Check Stock

QLOUNI 80Pcs 7-21mm 304 Stainless Steel Single Ear Stepless Hose Clamps with Clamp Crimper Tool Kit,For Water Pipe, Plumbing, Automotive and Mechanical Application

  • 10T Crimping Power: Fits 1/2"(12.7mm), 3/4"(19.05mm), 1"(25.4mm) copper tubes. Our hydraulic pipe crimping tool features excellent crimping performance, offering 10 Tons compressive force, more labor-saving, and crimping pipes in seconds..
  • Changeable Dies 1/2", 3/4", 1": With ball-bearing springs inside the head, simply slide in and out to change crimping dies of different sizes. This hydraulic copper tube fittings crimper meets your various demand fast for pipe maintenance and repair..
  • Hydraulic System: The hydraulic pipe crimper is constructed of 40CR steel with punching & forging process and powder-coated treatment. It is an integral hydraulic pipe crimping tool with a standard manual hydraulic pump..
  • Easy & Reliable: Thickened and insulated handles give you a comfortable and secure user experience. Fitted with an oil return valve, this hydraulic pipe tube crimping tool will release pressure automatically when reaching the max pressure..
  • Wide Application: The hydraulic copper pipe crimping tool is suitable for copper pipes, copper fittings & joints, copper sleeves. It is widely applied in electric power, traffic, petroleum, chemical engineering, mining, metallurgy, and shipbuilding areas..
Check Stock

Vertical Plate Lifting Clamp 3T - Industrial Steel Hoist Hook Chain 6614lbs Jaw Opening up to 1.2 Inch for Lifting and Transporting

  • Stainless steel forging, body casting process.
  • High-frequency quenching of jaws, wear-resistant.
Check Stock

VEVOR Hydraulic Pipe Crimping Tool Copper Crimping Pliers with Jaws 1/2 12.7mm 3/4 19.05mm 1 25.4mm 10T Hydraulic Copper Tube Fittings Crimper 40CR Steel for Copper Tube Plumbing and Fitting

  • 10T Crimping Power: Fits 1/2"(12.7mm), 3/4"(19.05mm), 1"(25.4mm) copper tubes. Our hydraulic pipe crimping tool features excellent crimping....
  • Changeable Dies 1/2", 3/4", 1": With ball-bearing springs inside the head, simply slide in and out to change crimping dies of different sizes. This....
  • Hydraulic System: The hydraulic pipe crimper is constructed of 40CR steel with punching & forging process and powder-coated treatment. It is an....
  • Easy & Reliable: Thickened and insulated handles give you a comfortable and secure user experience. Fitted with an oil return valve, this hydraulic....
  • Wide Application: The hydraulic copper pipe crimping tool is suitable for copper pipes, copper fittings & joints, copper sleeves. It is widely applied....
Check Stock

TEMCo TH0370 Dimple Die Set Tool Kit 8pcs: 1/2' 3/4' 1' 1-1/4' 1-1/2' 1-3/4' 2' 2-1/2'

  • Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13..
  • Eight Dimple Dies: 1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/2". (Actual Hole Size).
  • This dimple die set creates flared holes most commonly used on automobile parts fabrication. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes..
  • Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish..
  • This dimple die set works with a hydraulic driver and cylinder tool most commonly used with hydraulic knockout sets like our TEMCo THA043 and TH0372..
Check Stock

CBRIGHT 2 Pieces 6mm Female Thread Connector Bearing Steel Joint Rod End Bearing

  • Products can withstand radial load,Axial load or radial. Axial simultaneous joint load..
  • Due to the inner surface of the spherical inlaid composite material,therefore, the bearing in the work can produce self-lubricating..
  • Use: Joint bearings are widely used in engineering hydraulic cylinders, forging machine tools, engineering machinery, automation equipment, automotive shock absorbers, water conservancy machinery, etc..
  • 2 Pieces 6mm Female Thread Connector Joint Rod End Bearing.
Check Stock

CBRIGHT 4 Pieces 6mm Female Thread Connector Bearing Steel Joint Rod End Bearing

  • Products can withstand radial load,Axial load or radial..
  • Product Material: bearing steel. Axial simultaneous joint load..
  • Use: Joint bearings are widely used in engineering hydraulic cylinders, forging machine tools, engineering machinery, automation equipment, automotive shock absorbers, water conservancy machinery, etc..
  • Due to the inner surface of the spherical inlaid composite material,therefore, the bearing in the work can produce self-lubricating..
  • 4 Pieces 6mm Female Thread Connector Joint Rod End Bearing.
Check Stock

Greenlee 7304 Knockout Punch Driver Kit

  • Set contains 4 punch and die sets, and high impact plastic case.
  • Use with battery-powered, hydraulic, ratchet or manual drivers.
  • Properly assembled through pilot holes, they will make clean, fast and accurate holes.
Check Stock

Affordable Bender ab103 1-1/2" Hydraulic Tube Bender

  • Fully Hydraulic via an 8 Ton Bottle Jack.
Check Stock

SPEX 6775-115 Freezer/Mill, Small, 115V, 60 Hz

  • Accepts all SPEX Sample Prep Evacuable Pellet Die Sets.
  • Can be operated anywhere in the world, even under the most primitive conditions.
  • Economical alternative to motorized presses for labs with a small sample load.
  • Hardened steel buffer plate is engraved with concentric circles and enables easy centering of the die.
  • Manual, hydraulic laboratory press with buffer plate.
Check Stock

SWAG Off Road 20 TON Finger Brake Heavy Duty DIY Builder Kit

  • Attach to Most Standard 12-Ton or 20-Ton Hydraulic Shop....
  • Upper Die Mounting Cup Inside Diameter: 41....
  • Overall Dimensions: 14.50 in. Wide x 7.50 in. Deep x 9.25 in. High JEGS 81492 Press Break Attachment for 12-Ton or 20-Ton hydraulic shop presses makes....
  • Bends mild steel and aluminum with a maximum width of 12 in. and thickness of 3/8....
Check Stock

Lenz Replacement Filter Element - 10 Micron Hydraulic Filter Canister - Hydraulic Return Filter, 20 Max GPM, 200 Max PSI, 1”-12 UNF Thread Size - Spin-on Replacement Filter for Hydraulic Systems, 1 lb

  • SPECIFICATIONS: The Lenz 10 micron hydraulic filter replacement canister has a 20 GPM maximum flow rate with 200 PSI maximum working pressure. It has 1”-12 UNF thread size, operates in -22° F to +212° F temperature and weighs 1 lb (0.4 kg)..
  • DUAL APPLICATION: Our replacement for hydraulic fuel systems is versatile. It can be used in the return line of hydraulic systems. It offers a maximum flow rate of 20 GPM for return lines..
  • MADE TO LAST: With an aluminum die cast body and Buna-N seals, this spin-on fuel filter is durable and withstands high temperatures as well as corrosive fluids. This 10-micron filter can be easily used under harsh conditions..
  • DISPOSABLE: The spin-on hydraulic oil filter canister is designed to remove contaminants from petroleum-based, high water, water glycols, and water/oil emulsions fluids. Our hydraulic filter 10 micron is easily replaceable..
  • EASY ASSEMBLY: Our hydraulic return filter kit replacement part offers spin-on assembly and can be easily installed without any special equipment. It is easy to use and portable since it weighs only 1 lb..
Check Stock