Reviews Npt To 10an

Oil Filter Sandwich Plate , M20 x 1.5 Aluminum Oil Filter Cooler Sandwich Plate Adapter 1/8 NPT Oil Cooler Kit(silver)

  • Fitment: Universal. Inlet size: 10AN/ outlet diameter: 10AN, thread size of sensor insertions: 1/8NPT..
  • Premium Materials: Made from billet aluminum with a hard anodized finish, high temperature and anti oxidation resistance..
  • Special Improvement: Enhance performance and improve heat dissipation ability. Reduce temperature of engine & increase consistency of lubricant oil..
  • Clearly Indication: Bypass port mounting nut dimension: 3/4-16 UNF / M20 x 1.5, O-ring diameter: 2.6" / Inner diameter: 2.25"..
  • After-sales Service: Please feel free to puhase our products, our products have undergone strict quality inspection. Please carefully look at the model when you puhase, welcome you!.
Check Stock

MAKERELE Cord Grip Cable Glands Kit for Electrical Box NPT Waterproof Nylon Strain Relief 1/4” 3/8” 1/2” 3/4” 1” 1-1/4” 50pcs Junction case Connector Black With Gaskets

  • ✔Adapt to almost all your requirements: 6 types 50pcs of NPT wire glands, there are NPT 1/4”*20pcs, NPT 3/8”*10pcs, NPT 1/2”*10pcs, NPT 3/4”*6pcs, NPT1”*2pcs, NPT1-1/4”*2pcs in our cable glands kit, adapt to almost all your requirements of work..
  • ✔High Quality: The cord grips are Made from high quality nylon PA66 plastic, wildly use to cable fixing, wire splices, machinery control boxes, distribution panels, and electrical appliances etc ..
  • ✔Waterproof: IP68 rating allows for underwater use. Resistant to salt water, weak acid, alcohol, oil, grease and common solvents. Provide long time protection for your indoor and outdoor applications..
  • ✔Widely cable size range: Widely cable range from 0.10-0.25inch/ 0.20-0.39inch/ 0.25-0.47inch/ 0.5-0.7inch/ 0.7-0.9inch/ 0.9-1.2inch cable gland assortment. Ideal cable gland box for your project needs..
  • ✔Easy to install: You just need to thread the cable through the cable gland then tight up the sealing nut and lock nut, the cable will be tightly fixed but no need to disassemble..
Check Stock

VEPURLT Air Hydraulic Pump 10,000PSI, Air Hydraulic Foot Pump 1/2 Gal Reservoir, Air Foot Pedal Hydraulic Pump with Hose for Hydraulic Bead Breaker

  • 【Basic Info】 -The hydraulic foot pump has a maximum working pressure of 10,000 PSI, used for all 10-ton applications. Action: Single Acting, Flow Rate: 0.85 liters / 0.22 gallons per minute, Air Connection: 1/4" NPT, Output Oil Hole: 3/8" NPT, Hydraulic Oil Type: AW-32, Oil Capacity: 98 Cubic. Connector Type: 3/8" NPT quick hydraulic coupler with dust cap.
  • 【Trustworthy Security】-The air hydraulic foot pump is built-in internal relief valve, which protects the hydraulic components regardless of hydraulic pressure. The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock.
  • 【Powerful Energy】-This air powered hydraulic pump is an ideal all-around power source, for use with a variety of rams, presses, & hydraulic pullers, that develops 10,000 PSI hydraulic pressure at 100 PSI air pressure.
  • 【Matching Accessories】-Equipped with a 4ft high-pressure oil pipe that features double protection of embedded steel wires and thickened outer layer. The oil port is made of cast steel, durable and reliable. A spray gun is included to control the input and interru....
Check Stock

SINTLY 3/8\ NPT to 6AN Flare Male AN6 Straight Fitting Union Flare Adapter Aluminum Black 2Pcs

  • 【Tips】To obtain a proper seal in the NPT joint, you need to use a sealant compound or PTFE tape. The thread is sealed by wedging. The NPT connection cannot be reused. When accessories are reused, this can cause wear or increase the possibility of leakage..
  • 【37 Degree Flare Fitting Taper】：The 6an male flare to 3/8" NPT fitting has one male side AN is a 37-degree flare fitting taper and the other male side NPT is a 60 degree tapered threads. These adapter hose fittings are designed to quickly make professional 37° AN connections from NPT tapered pipe threads. Designed for smooth flow that gives better fluid flow, tight security, and leaks free.
  • 【Application】-6AN to 3/8" NPT straight flare to pipe adapter is widely used in kinds of liquids, oil, Water, Air, Fuel lines, E85, gas, etc. Bulkhead Fitting is perfect to apply in automotive, industrial, boat/marine, etc. The male flare fitting fit all oil cooler / fuel tank / fuel pump/fluid Line/turbo..
  • 【Material ＆ Features】Made of High-Performance Lightweight 6061-T6 Billet Aluminum Material. All threads are designed for the maximum percentage of engagement. One side is AN standard and the other is NPT National Pipe Taper Thread. Each straight fitting is completed with a black anodized fini....
Check Stock

Eastman 3/4 Inch Nevercold Universal Under Sink Hot Water Recirculation Pump Kit, Black, 70602

  • ON DEMAND HOT WATER: The Nevercold recirculating pump system is specially designed for under sink installation, and makes sure you have hot water in every area of your home when you need it, cutting down on wait times and water waste.
  • equipped with a built-in programmable timer that activates the pump at times of demand.
  • WHAT IS INCLUDED: (1) stainless recirculating pump with a pre-wired 10 ft power cord, (2) 3/4 inch NPT male threaded stainless steel flanges, (2) flange gaskets, (2) flex hoses 3/4 inch NPT x 3/4 inch NPT, measuring 24 inches long, (2) tees, 1/2 inch compression x 3/4 inch NPT x 1/2 inch compression.
  • EASY INSTALLATION: Circulating pump can be easily installed within 30 minutes, and is ideal for homes with standard single-pipe plumbing systems up to 250 feet **Not for use with tankless water heaters, requires an electrical outlet**.
  • CERTIFIED: Efficient circulation pump meets California Title 24 on-call requirements.
  • COST EFFECTIVE: The Nevercold hot water recirculating pump system can lower your water bill by up to 10% and save up to 12,000 gallons of water per year.
Check Stock

Minimprover 20 PCS Anti-Corrosion Brass Schrader Valve Standard Valve Core with 1/4''NPT Male and 1/8' NPT Male Threads Tank Valve & Caps with Rubber Ring

  • ★ 【Material】: the male threads tank valve are constructed with quality brass material, reliable, sturdy, corrosion resistant, and not easy to rust, which can support a long time service.
  • The surface of the solid brass has been polished, which touches smooth and comfortable..
  • ★ 【Product Parameter】: 1/4" NPT Male Threads & 1/8" NPT Male Threads.1/4" Valve Length: 1.32Inch | Width: 0.5Inch.1/8" Valve Length: 0.85Inch | Width: 0.32Inch.The length and width are all manually measured, allowing slight deviation..
  • ★ 【Main Function】: For using with air compressor tank, The NPT Tank Valve are capable of preventing air from leaking out while allowing for air to pass through, small shape but plays an important role, while please remind that their maximum working pressure should not exceed 200PSI..
  • ★ 【Application】: The reliable and durable tank valve are applied with air compressor tanks to fill vessels with air, suitable for most car's application, industry, agriculture and another machine's usage, which can solve the problem of tire's air leaking effectively and availably..
  • ★ 【Package Include】: 5PCS 1/4"NPT valve & 5PCS 1/8"NPT valve & 10PCS High Quality Caps with Rubber Ring.It comes with 1 year warranty..
Check Stock

HornBlasters 8 Gallon 8 Port Steel Air Tank

  • 150 PSI Certified Operating Pressure - This tank is tested up to 300 PSI for a certified pressure rating of 150 PSI..
  • 8-Port Configuration - This tank features 8 ports. Seven of these ports are 1/2" NPT, whereas the remaining port is 3/4" NPT..
  • Certified to 150 PSI! - Each of these tanks is tested to 300 PSI for a certified pressure rating of 150 PSI..
  • Interior Red Oxidized Coating - This tank features an interior red oxidized coating to prevent premature rust and oxidation from moisture build-up within the tank..
  • Meets SAE J10 & FMVSS 121 Specifications!.
Check Stock

EVIL ENERGY 6AN Male Flare to 3/8' NPT Pipe Fitting Adapter Aluminum Straight Black

  • Size: AN6 to 3/8 NPT,the thread size of 6AN is 9/16-18UNF..
  • Material: Made of aluminum alloy 6061-T6, anodized black surface..
  • Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered threads.(To ensure no leakage at the NPT end, sealant or PTFE (polytetrafluoroethylene tape) is strongly recommended.).
  • 3/8 NPT to 6an fitting can be used with various engine oils, water, air, alcohol, coolant, E85, methanol, transmission oil, etc..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

EVIL ENERGY 6AN Male Flare to 1/4\ NPT Pipe Fitting Adapter Aluminum Straight Black 2Pcs

  • Size: AN6 to 1/4 NPT,the thread size of 6AN is 9/16-18UNF..
  • Material: Made of aluminum alloy 6061-T6, anodized black surface..
  • Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered threads.(To ensure no leakage at the NPT end, sealant or PTFE (polytetrafluoroethylene tape) is strongly recommended.).
  • 1/4 NPT to 6an fitting can be used with various engine oils, water, air, alcohol, coolant, E85, methanol, transmission oil, etc..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

Hanson 12008 1\ Rd Hex Plain Die Stock for Tap Die Extraction

  • UNC taps 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF taps 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • Metric dies 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
  • UNC dies 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF dies 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • BUILT TO LAST: Constructed from hardened alloy steel for maximum strength and longevity.
  • Can cut materials such as cast iron, steel, aluminum, copper.
  • EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes coarse and fine threads numbered taps and dies from #4-40 to #12-24 and fractional taps and dies from 1/4"-28 to 1/2"-20, 1/8"-27 NPT tap and die, metric tap and dies from M3x0.5 to M12x1.75, thread gauge, tap handle, die handle, small tap chuck, and a carrying case for your convenience.
Check Stock

Segomo Tools 110 Piece Hardened Alloy Steel SAE Tap And Die Threading Tool Set With Storage Case | SAE Tap and Die Set | Rethreading Kit | Tap Set | Tap and Die Kit - TD110SAE

  • ...24 UNC, 1/4-20 UNC, 1/4-28 UNF, 1/4-24 UNS, 1/4-32 UNS, 5/16-18 UNC, 5/16-24 UNF, 3/8-16 UNC, 3/8-24 UNF, 7/16-14 UNC, 7/16-20 UNF, 1/2-13 UNC, 1/2-20 UNF, 9/16-12 UNC, 9/16-18 UNF, 5/8-11 UNC, 5/8-18 UNF, 3/4-10 UNC, 3/4-16 UNF, M6x1.0, M8x1.25, M10x1, M10x1.5, M11x1.5, M12x1.25, M12x1.75, M14x1.25, M18x1.5, 1/8-27NPT, 1/4-18NPT..
  • SAE Die Sizes: 4-40 UNC, 6-32 UNC, 8-32 UNC, 10-24 UNC, 10-32 UNF, 12-24 UNC, 1/4-20 UNC, 1/4-24 UNS, 1/4-28 UNF, 1/4-32 UNS, 5/16-18 UNC, 5/16-24 UNF, 3/8-16 UNC, 3/8-24 UNF, 7/16-14 UNC, 7/16-20 UNF, 1/2-13 UNC, 1/2-20 UNF, 9/16-12 UNC, 9/16-18 UNF, 5/8-11 UNC, 5/8-18 UNF, 3/4-10 UNC, 3/4-16 UNF, M6x1.0, M8x1.25, M10x1.0, M10x1.5, M11x1.5, M12x1.25, M12x1.75, M14x1.25, M18x1.5, 1/4-18NPT, 1/8-27NPT.
Check Stock

GlowShift 3in1 Analog 60 PSI Boost Gauge Kit with Digital 2200 F Pyrometer Exhaust Gas Temp EGT & 300 F Temperature Readings - 10 Selectable LED Colors - Black Dial - Clear Lens - 2-3/8' 60mm

  • GlowShift 3in1 Diesel Combo Gauge Allows Users to Monitor 3 Vital Engine Components from 1 Unit with an Analog Boost & Blue Digital Exhaust Gas Temperature & Temperature Displays.
  • Analog Boost Readings from 0 to 60 PSI – Digital EGT Readings from 200° to 2200°F – Digital Temperature Readings from 68° to 302°F.
  • 2-3/8″ (60mm) Diameter Gauge with Black Dial, Clear Lens & Illuminated Red Needle – 10 Solid Color Modes & 2 Color Cycle Modes – 6 Daytime & Nighttime Dimming Modes.
  • Boost Gauge Parts: 1/8-27 NPT Pressure Sensor & 8′ Sensor Harness – EGT Gauge Parts: 1/8-27 NPT EGT Probe with 3′ of Wire & 6′ Sensor Harness – Temperature Gauge Parts: 1/8-27 NPT Temp Sensor & 8′ Sensor Harness – 3′ Power Harness, Dashboard Pod, Gauge Visor, Mounting Hardware & Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

GlowShift Tinted 7 Color 100 PSI Oil Pressure Gauge Kit - Includes Electronic Sensor - Black Dial - Smoked Lens - for Car & Truck - 2-1/16" 52mm

  • GlowShift 10 Color Digital Series Dual Temperature & Pressure Gauge Allows You to Monitor 2 Vital Engine Statistics from 1 Unit - Keep an Eye on Water, Transmission, Oil or Differential Temperatures, as well as Boost, Oil or Fuel Pressure.
  • Temperature Readings from 68° to 302° Fahrenheit - Pressure Readings from 0 to 145 PSI - Set Each Display to its Own Color - 2-1/16" (52mm) Gauge with 2 Digital Displays & Tinted Lens.
  • Quick-Glance & Easy to Read Digital Display - 10 Solid Color Modes & 2 Color Cycle Modes - Self-Calibration at Startup Ensures that the Gauge is Performing Optimally.
  • Includes 1/8-27 NPT Temperature Sensor, 1/8-27 NPT Pressure Sensor, (2) 9' Sensor Harnesses, 2' Power Harness, Gauge Visor, Mounting Hardware & Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock