Reviews Npt Parts

Toilet Quality Controller (Background Score)

  • ✔ PRODUCT DESCRIPTION: Universal Toilet paper holder with 1/2" npt (.8" O.D.) pipes. All pieces powder coated a glossy black. No oil and no rusting. Mounting screws (4) and anchors (4) included!.
  • ✔ ADVANTAGES: This product uses quality 1/2” npt fittings, UNLIKE most of the other smaller (3/8” npt) products on the market. Use this product for any DIY Decorative or Design project-Have fun!.
  • ✔ QUALITY FLANGES (3.4") are designed to mount completely Flat to the wall unlike many of the smaller diameter (2.7”) flanges. The larger flanges improve strength of your tp holder mount, because of the larger surface area of the flange mount..
  • ✔ PREMIUM FINISH: The product is E-Coated Black, so there is no need to clean or degrease these parts. This coating also prevents corrosion- NO RUSTING!.
  • ✔ WHATS INCLUDED: 1- Flange (3.4"), 1- Straight 1/2 npt pipe ( 6” long), 1- Elbows, 1-straight 1/2 npt pipes (2.25” long), 4- Black wood screws, 4- Drywall Anchors..
Check Stock

GlowShift 3in1 Analog 60 PSI Boost Gauge Kit with Digital 2200 F Pyrometer Exhaust Gas Temp EGT & 300 F Temperature Readings - 10 Selectable LED Colors - Black Dial - Clear Lens - 2-3/8' 60mm

  • GlowShift 3in1 Diesel Combo Gauge Allows Users to Monitor 3 Vital Engine Components from 1 Unit with an Analog Boost & Blue Digital Exhaust Gas Temperature & Temperature Displays.
  • Analog Boost Readings from 0 to 60 PSI – Digital EGT Readings from 200° to 2200°F – Digital Temperature Readings from 68° to 302°F.
  • 2-3/8″ (60mm) Diameter Gauge with Black Dial, Clear Lens & Illuminated Red Needle – 10 Solid Color Modes & 2 Color Cycle Modes – 6 Daytime & Nighttime Dimming Modes.
  • Boost Gauge Parts: 1/8-27 NPT Pressure Sensor & 8′ Sensor Harness – EGT Gauge Parts: 1/8-27 NPT EGT Probe with 3′ of Wire & 6′ Sensor Harness – Temperature Gauge Parts: 1/8-27 NPT Temp Sensor & 8′ Sensor Harness – 3′ Power Harness, Dashboard Pod, Gauge Visor, Mounting Hardware & Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

Rheem SP12574 Temperature and Pressure Relief Valve,Small

  • For best results, use only Rheem replacement parts for repairing your Rheem Water Heater.
  • Maximum Temperature Setting (Deg. F): 210, Maximum Pressure Setting (psi): 150, CSA Capacity (BTU/HR): 105,000, Inlet Thread Size - NPT (in.): 3/4.
  • Outlet Thread Size - NPT (in.): 3/4, Overall Length (in.): 7-1/4, Body Length (in.): 3-1/4, Sensor Length (in.): 4.
Check Stock

Simpson Cleaning 7101359 Thermal Relief Valve for Gas Powered Pressure Washer Pumps, Gold

  • GET YOUR PRESSURE WASHER PUMP BACK IN ACTION: The Simpson Cleaning Thermal Relief Valve (TRV) is a high quality replacement part for your pressure washer pump.
  • With easy installation, you will be able to get back to your power washing projects in no time.
  • WHAT IT DOES: The TRV prevents heat damage to water seals and other internal components by releasing hot water from the pump and allowing cool water to come in via the pump inlet.
  • COMPATIBILITY: Compatible with most pressure washers that have 1/4-inch NPT.
  • See images and description below for full list of compatible pressure washer pumps.
  • PRODUCT DETAILS: Comes with thread sealer already installed.
  • QUALITY REPLACeMENT PARTS: Simpson replacement parts are great for commercial and residential pressure washers.
  • From inlet and outlet fittings to seal kits, manifolds, and valves, save time and money by repairing your pump with genuine Simpson components.
Check Stock

HFS 2\ Dry Utility Vacuum Pressure Gauge Blk.Steel 1/4\ NPT Lower Mount; -30HG/0PSI

  • Pressure range:0-1Mpa or 0-150 PSI,1/4" NPT,Diameter of gauge: 2.5".
  • LIQUID/GLYCERIN FILLED PRESSURE GAUGE,2.5" FACE/DIAL 1/4" MALE NPT CONNECTION.
  • Stainless steel case, Copper alloy wetted parts.
  • broad applications - water, oil, air and more.
  • Monitor the post R.O. water pressure and vital to the functionality of your RO system!.
Check Stock

ApplianPar Magnesium Flexible Anode Rod for Hot Water Heaters 3/4 inch NPT Thread 44'' Long 0.80" Diameter

  • Fit models: Almost all water heaters use the standard 3/4” NPT Anode Rod Connection.
  • Size: 44″ length rod is hinged into four parts,each section is about 9 1/2″ long, 3/4” NPT Thread.
  • Package includes: 1 x Magnesium Flexible Water Heater Anode Rod.
Check Stock

VIS 2PCS Water Heater Replacement Drain Valve - Replace External Seal Drain Cock 3/8\ Male Brass Pipe Simple and Easy Installation

  • Size: 1/8 Inch NPT female x 1/2Inch NPT male.
  • Features:Strong and Durable.quality original parts precision technology.
  • Working Pressure Range:21.7Psi-145 Psi/0.15Mpa-1Mpa.
  • Environment and Fluid Temperature:41-140℉/4-60℃.
Check Stock

TeeJet 1\ Inlet Control Valve, TeeValve AA17Y Farmer Bob's Parts AA17Y

  • AA17Y 1" NPT Inlet Boom Selector Valve. 1" Inlet, 3/4" Accessory and Boom Outlets. For selective control of three-section boom sprayers at pressures up to 300 PSI. Features: -Use to open any of three boom section lines in any desired combination. -Raise lever to open, lower level to close the valve without changing the indexed position. -Aluminum construction with stainless steel and plastic internal parts for maximum corrosion resistance. -1/4" NPT Pressure gauge port..
Check Stock

Control Devices-ST25-1A ST Series Brass ASME Safety Valve, 60 psi Set Pressure, 1/4\ Male NPT

  • For best results, use only Rheem replacement parts for repairing your Rheem Water Heater.
  • Maximum Temperature Setting (Deg. F): 210, Maximum Pressure Setting (psi): 150, CSA Capacity (BTU/HR): 105,000, Inlet Thread Size - NPT (in.): 3/4.
  • Outlet Thread Size - NPT (in.): 3/4, Overall Length (in.): 7-1/4, Body Length (in.): 4-1/4, Sensor Length (in.): 3.
  • Kits which contain this part: 45W510, SP13266.
Check Stock

YZM Water Pressure Test Gauge with Brass Internals 2-1/2 Dial Display Bottom Mount Pressure Gauge,Water Pressure Gauge Black

  • Bottom Mount Pressure range:0-1.0MPa or 0-150 PSI,3/4" NPT,Diameter of gauge: 2-1/2".
  • PRESSURE GAUGE,2.5" FACE/DIAL 3/4" FEMALE NPT CONNECTION.
  • Black steel case, brass wetted parts, dry.
  • broad applications - water, air and more.
  • Monitor the post R.O. water pressure and vital to the functionality of your RO system!.
Check Stock

Pool Pressure Gauge, UHARBOUR 2' Dial Clean Filter Utility Water Pressure Gauge 60psi with Setable Case and 1/4'NPT Bottom Mount for Swimming Pool Filter, Spa and Aquarium

  • 1. PORFESSIONAL GRADE WATER GAUGE, Large 2"Dial, 1/4"NPT Center botton mount connection.
  • 2. SPECIAL PROTECTION CASE with obvious mark on the front, twist to move bezel, help operater to set the start and clean filter.
  • 3. DURABLE MOVEMENT AND SMART DESIGN, brass wetted parts,accuracy: +/-2.5% comply to ASME B40.100 standard, Pressure range to 60psi/4bar, double scales with different color, easy to read..
  • 4. WIDLY USED for pressure measuring on the filter of swimming pool,Spa, Aquarium Water and so on..
  • 5. EQUIPED WITH THREAD ADAPTOR make it used both for 1/8"NPT and 1/4"NPT connection, with corrosion resistant Sealant on the thread..
Check Stock

20 Pieces Air Compressor Accessory Kit, 1/4″ x 25 Feet Hybrid Air Hose, 1/4″ NPT Air Tool Kit with Tire Inflator Gauge, Blow Gun and Air Hose Fittings

  • This air hose is blended rubber and pvc material for heavy duty, lightweight, flexibility, abrasion resistance and all weather use..
  • Equiped with 1/4″ industrial NPT fittings and quick coupler for directly connect to air compressor and air tools..
  • 1/4″ inner diameter by 25′ length, delivers up to 300 PSI for maximum working pressure, 1200 PSI bursting pressure..
  • 20 pieces air tool parts includes Tire Inflator with Gauge,blow gun,rubber tip,metal tip,inflation needle,tapered nozzle,safety nozzle,Air Clean Tool adapter,1/4″ MNPT industrial plug,1/4″ FNPT industrial coupler,1/4″-18NPT Male Connector,1/4″-18NPT Female Connector,Teflon Tape..
  • This Heavy Duty Air Compressor Accessory Kit is ideal for garage, shop, industry, home and many other uses..
Check Stock

Milton S154 Siphon Spray Blow-Gun Kit with Tip Bent

  • Excellent for degreasing engines, garage bays and parts, spraying livestock, plants and flowers.
  • Perfect for rust proofing tools and machinery and lubricating parts and engines.
Check Stock