Reviews Nozzle Set

Tool Daily Turbo Nozzle for Pressure Washer, Rotating Turbo Nozzle, with 5 Spray Nozzle Tips, Orifice 2.5, 2500 PSI, 1/4 Inch, 6-Pack

  • Nozzle Tips set includes: 1-piece Red Nozzle Tip (0 Degree), 1-piece Yellow Nozzle Tip (15 Degree), 1-piece Green Nozzle Tip (25 Degree), 1-piece White Nozzle Tip (40 Degree), 1-piece soap nozzle tip (65 Degree). 1-piece Quick Connect Turbo Nozzle..
  • Turbo Nozzle: Orifice 2.5. Max. pressure is 172Bar, 2500 PSI. Max. temperature is 45℃, 92°F..
  • Turbo washer nozzle can create a powerful jet of water and cleans up to 40% faster than standard nozzles. Ideal for cleaning heavily soiled bricks and large amounts of dirty. Turbo nozzle for pressure washer fits 1/4’’ fittings of most brands pressure washer wand for intense clean..
  • Pressure washer nozzle: Orifice 2.5. Max. pressure is 4000 PSI..
  • Choose different angles of Pressure washer tips according to actual need. Different angle allows you to clean hard-to-reach areas quickly and easily. Pressure washer nozzle tips can be attached to a Quick-Connect Wand for swifter application..
Check Stock

Megaforce

  • 1 x 2.5mm Nozzle (1 nozzle was pre-installed to the spray gun).
  • 1x True Micrometer Air Regulator with Gauge.
  • This spray gun set is designed to provide equal atomization and partical size for all kinds of surface painting..
  • It has control knobs for full adjustment over spray pattern, fluid control and air pressure. Contains 1.4mm/1.7mm/2.5mm stainless steel needles and nozzles set to meet your different applications.
  • Light weight, ergonomic design and easy trigger pivot reduces operating fatigue..
  • Ideal for spraying base coats, clear coats and other high viscosity coatings such as extreme high build or polyester primers, thick enamels, latex paints, chip guard, metal flakes, gel coats, liquid mask, etc. Two years warranty..
Check Stock

PowerNet XL Volleyball Wheeled Cart | Portable Hammock Ball Cart | Collapsible Rolling Training Equipment Basket | Lightweight Bin | Great for Indoor and Outdoor Use | Multisport

  • What you will receive: 1 piece of air pump valve adaptor, 1 piece of Metal air pump converter, 4 piece of air valve nozzles converter. Lightweigh and easy to carry, the air valve adapter set can meets all your needs..
  • Broad applicability: our air valve adapter set includes 4 different air nozzle converters. Round head nozzle fits inflatable beds, pools and boats. Sharp head nozzle fits swim rings and pool floats. Square head nozzle fits SUPs and dinghies. Spiral head nozzle fits kayaks and canoes..
  • High quality material: the air pump valve adaptor and air valve nozzles converter are made of high strength hard plastic and alloy, nozzle air pump converter made of copper. These two materials are quite sturdy and durable,can be used for a long time..
  • Easy to use: Choose the right nozzle for the adapter. Connect the air compressor hose to our adapter. Insert the adapter into the inflation port of SUP. Turn on the air compressor and start filling..
  • Works great: It works great, could hold down the pin, and prevents back flow of air so you can get the right pressure. It will be a Indispensable accessories of your inflatable pontoon boat..
Check Stock

Tool Daily Pressure Washer Nozzle Tips Multiple Degrees, 1/4 inch, 5-Pack (Orifice 3.0)

  • ATTENTION: Please see Image 2 and find the orifice you need based on working pressure and flow rate (GPM). The orifice of these nozzles are 3.0. The working pressure is up to 4000 PSI..
  • Different angle allows you to clean hard-to-reach areas quickly and easily.
  • Nozzle Tips set includes: 1 Red Stainless Steel Nozzle Tip (0 Degree), 1 Yellow Stainless Steel Nozzle Tip (15 Degree), 1 Green Stainless Steel Nozzle Tip (25 Degree), 1 White Stainless Steel Nozzle Tip (40 Degree), 1 Brass soap nozzle tip (65 Degree). Choose different angles nozzle according to the actual need.
  • Don’t use a ladder to clean or sprinkle water for tree with these nozzles.
  • More Application: Can be attached to a Quick-Connect Wand for swifter application and more.
Check Stock

Tool Daily Pressure Washer Nozzle Tips Multiple Degrees, 1/4 inch, 5-Pack (Orifice 3.5)

  • ATTENTION: Please see Image 2 and find the orifice you need based on working pressure and flow rate (GPM). The orifice of these nozzles are 3.5. The working pressure is up to 4000 PSI..
  • Different angle allows you to clean hard-to-reach areas quickly and easily.
  • Nozzle Tips set includes: 1 Red Stainless Steel Nozzle Tip (0 Degree), 1 Yellow Stainless Steel Nozzle Tip (15 Degree), 1 Green Stainless Steel Nozzle Tip (25 Degree), 1 White Stainless Steel Nozzle Tip (40 Degree), 1 Brass soap nozzle tip (65 Degree). Choose different angles nozzle according to the actual need.
  • Don’t use a ladder to clean or sprinkle water for tree with these nozzles..
  • More Application: Can be attached to a Quick-Connect Wand for swifter application and more.
Check Stock

Tool Daily Pressure Washer Spray Nozzle Tips Multiple Degrees, 1/4 inch 5-Pack (2.5 GPM)

  • ATTENTION: Please see Image 6 and find the orifice you need based on working pressure and flow rate (GPM). The orifice of these nozzles are 2.5. Different angle allows you to clean hard-to-reach areas quickly and easily.
  • Nozzle Tips set includes: 1 Red Stainless Steel Nozzle Tip (0 Degree), 1 Yellow Stainless Steel Nozzle Tip (15 Degree), 1 Green Stainless Steel Nozzle Tip (25 Degree), 1 White Stainless Steel Nozzle Tip (40 Degree), 1 Brass soap nozzle tip (65 Degree). Choose different angles nozzle according to the actual need.
  • Don't use a ladder to clean or sprinkle water for tree with these nozzles.
  • More Application: Can be attached to a Quick-Connect Wand for swifter application and more.
Check Stock

GDHXW 7/8 Guard Combo 517 Airless Spray Tip for Standard Airless Paint Spray Guns

  • Matching model of nozzle base: 243611 Nozzle model:517.
  • Please note: the nozzle seat only matches the spray gun with 7 / 8 threaded joint..
  • Guard Combo Made of high strength metal and plastic material, sturdy and durable to use.Replacement of quality airless sprayer accessories..
  • The assembly is equipped with nozzle tip, shield and nozzle gasket, which is a complete set of replacement products..
  • If you have any questions during purchase or use, please contact us..
Check Stock

BEETRO HVLP Air Spray Gun 1.3/1.4/1.8mm Nozzle 1000ml Capacity 14.5CFM 30-43psi with 11 Filters 10pcs 190M Paint Strainers Air Control Valve 1/4 Connector and Type 2 Adapter

  • ...olume Low Pressure) technology provides a higher transfer of materials while reducing bounce back and overspray, increase transfer efficiency of the coating materials to the surface (up to 85%). With HVLP technology you also get a significant material savings, which is up to 30-40%.
  • Include 3 sets of stainless steel nozzle sets: The 1.3 mm and 1.4 mm nozzle sets are ideal for use with base coats, clear coats, single stage, primer-sealers, and other light to medium viscosity paint coating materials. The 1.8 mm nozzle set is ideal for primers, 2K primers, surfacers, and other medium to high viscosity paint coating materials.
  • No O-ring design, easy to clean with chemical agents and thinners. Super-precision external mix cap with filter for perfect pattern. Non-drip cup protects against paint wasting and ensures less mess, saving your time and money.
  • 3 adjustable knobs bring in concise painting: fluid control (needle adjust knob) regulates amount of paint sprayed, pattern control adjusts the fan pattern size, and air adjustment valve provides versatility to adjust air flow. Please always remember: THE MAX WORKING PRESSURE IS 3.0bar(43psi).
  • Can be used with WATER-BASED PAINT. Includes: Air spray gun equipped with 1.4mm nozzle, 1 set of 1.3mm nozzle, 1 set of ....
Check Stock

Alyone (12 Pieces Per Pack) 5mm Carburetor Jets for Mikuni Vm22 Vm24 Vm26 125 150 Main Jets (A Set)

  • [High Quality] The main jet kit for motorcycle carburetor is 100% brand new. The carburetor jet kit is made of copper, which is durable, corrosion-resistant, and has a long service life..
  • [Carburetor main nozzle size] Total length 8mm, Diameter of head: 7mm, Thickness of Head: 3mm, Thread: 5x0.75mm.
  • [Usage and compatibility]Carburetor main nozzle is suitable for Mikuni VM22 VM24 VM26 VM30 carbohydrates, widely used in 125cc 150cc 200cc 250cc motorcycle engines.
  • [12 Pcs Carburetor main nozzle A Set] #45-72(#45 #48 #50 #52 #55 #58 #60 #62 #65 #68 #70 #72)..
  • [12 Pcs Carburetor main nozzle B Set] #75-102(#75 #78 #80 #82 #85 #88 #90 #92 #95 #98 #100 #102)..
Check Stock

PEGGAS - 5 Piece Pressure Washer Nozzles - Premium Pressure Washer Nozzles - 1/4\ Quick Connect - Power Washer Attachments - Washer Tips - Spray Nozzle - Replacement For Most Pressure Washer Brands

  • 5 ESSENTIAL NOZZLES - Spray Nozzle Tips Set Includes: 1 Red Stainless Steel Nozzle Tip (0 Degree), 1 Yellow Stainless Steel Nozzle Tip (15 Degree), 1 Green Stainless Steel Nozzle Tip (25 Degree), 1 White Stainless Steel Nozzle Tip (40 Degree), 1 Brass Soap Nozzle Tip (65 Degree).
  • PRESSURE WASHER TIPS - 5 Better than OEM High Pressure Power Washer Nozzles, Perfect Replacement.
  • Highest Quality - Our Nozzle Tips Are Constructed From High Quality Stainless Steel And Brass.
  • 1/4" QUICK CONNECT- Quick Release Fitting Makes It Very Easy To Switch Tips, Makes Jobs Much Faster!.
  • PRESSURE WASHERS RATED - 1/4 Inch Quick Connection Design: 2.9 GPM & Up To 4000 PSI..
Check Stock

Intex 26004E Above Ground Swimming Pool Inlet Air Water Jet Replacement Part Kit; Includes Plunger Valve, Strainer Connector, Strainer Grid, etc.

  • INCLUDED WITH REPLACEMENT PART: The replacement part set includes 1 plunger valve with O-ring (10747), 2 strainer connectors for 1.25-inch fitting (11070), 2 strainer grids (11072), and 1 pool inlet air nozzle set (12354).
  • INCLUDED WITH POOL INLET: Pool inlet air nozzle set includes the jet exterior, O-ring, fittings compatible with other set parts.
  • COMPATIABLE WITH: This pool jet replacement part kit works with pool filter pumps with 1,050 to 1,900 gallons per hour flow rates. You can use these pool jet replacement parts with any Intex above-ground pool.
  • INSTALLATION: Plunger valves install in the side of your Intex pool and connect with your Intex hose fitings.
  • WATER CIRCULATION: Better circulate water through your pool with the help of this Intex 26004E Above Ground Swimming Pool Inlet Air Nozzle Replacement Part Set.
Check Stock

Reusable Caulking Nozzle Applicator Finishing Tool 26 pcs Stainless Steel Caulking Nozzle Set Silicone Sealant Caulking Finisher Nozzle for Bathroom Window Sink Joint

  • 【Ideal Caulking Tool Nozzle Set】This 26 pieces set of caulking nozzle applicator finishing tool can help you repair the gaps smoothly and....
  • 【Efficient Caulk Tool】The stainless steel caulking nozzle set with 45 degree designed muzzle provide 14 pieces different size to fit....
  • 【Premium Quality】Our reusable caulking finisher nozzles are made of 304 stainless steel and silicone, waterproof, moisture-proof and....
  • 【Great Convenience】The sealant finishing tool set is very easy to install, providing easy caulking to different kinds of gaps, perfect for....
  • 【 Life Time Warranty 】We provide a lifetime warranty for the caulking nozzles, if you have any questions or are not satisfied with our....
Check Stock

INCREWAY 3pcs Silicone Heater Block Cover High Temperature Resistance Silicone Socks for V6 E3D Printer Extruder Hotend,Black

  • Size of Heater Block: 20*16*12mm. Inner Hole for Heater Tube: 6mm, for thermocouple/ thermistor: 3mm.
  • High Quality Material: Made of solid aluminum material with sandblasting oxidation treatment, durable in use.
  • Inner Hole: Inner hole for set screw: M6 and M3 (heat pipe and thermocouple).
  • Nozzle: Suitable nozzle: M6 Screw thread and it works perfect with nozzle and nozzle throat.
  • Application: Accept Nozzle with M6 screw thread for Reprap.
Check Stock