Forney 85337 MIG Welder Nozzle, Tweco Style, 5/8-Inch Bore
- Easy to replace, high-quality stainless steel, durable material..
- No air leak, highly univeral for various heat guns and heat resistant..
- Effective way to avoid the hot air gap between the outlet steel pipe to drain from the air nozzle with hot air gun..
- Practical and neccessary replacement for your plastic hot air welder gun. Besides, we have high quality heat guns in our shop!.
- Package included: 1x Triangle Welding Nozzle, 1x Round Welding Nozzle, 1x Welding fixed nozzle.(Welding fixed nozzle: Used for fixing before welding.).
Check StockAlbion Engineering Company 873-5 B-Line Plastic Front Cap for Albion B-Line Sausage Guns, Black
- Standard Plastic Front Cap for Albion B-Line guns.
- Black plastic ring cap for retaining the #873-3 black cone nozzle on all B-Line sausage guns.
- Fits Albion B12S20, B12S13, B12S10, B26S20, B18S20 guns.
- Will also retain the #873-2 clear narrow nozzle, the #935-4 dark green bent cone, the #587-2 cap insert and the #966-2 metal nozzle adapter.
Check StockWelding Nozzles 169-724 169724 1/2
- 4PK Miller style MIG gas nozzle 169-724(169724).
- 1/2" orifice, 1/8 in / 3.2 mm recessed tip, fits 169-724 nozzles for Miller M-25/M-40 MIG guns..
- The gas nozzles don't fit Miller 180 or 190DescriptionPremium quality Miller style MIG gas nozzle 169724.
- 1/2" orifice,1/8 in / 3.2 mm recessed tip, fits 169-724 nozzle adapter in Miller M-25/M-40 MIG guns.
- The gas nozzles don't fit Miller 180 or 190.
Check Stock
Kellsport Products Woolwax Undercoating Spray Gun with Extension Wand
- Nozzle opening reduced by 40%+ for finer spray and less overspray and waste..
- Ergonomic heavy duty trigger attached with a grommet (no flimsy c-ring). Xtra heavy brass push rod..
- Siphon tube extended to draw from very bottom of canister to reduce re-fills and air failure..
- Gun Frame is imported, nozzle, trigger, and all attachments are assembled and Made in U.S.ADescriptionFluid Film applicator guns from Kellsport Products have been modified by the gun manufacturer to work especially well with Fluid Film NAS formula. These are not "stock" undercoating guns. We have spent several years working with different manufacturers to "tweak" and develop the very best Fluid Film applicators available. These guns are specifically manufactured for use with Fluid Film NAS formula (undercoating), and may not work well with other products. Note: The company that has made these guns for many years, Kellsport Products has switched from the Fluid Film label on the bottles, to a "WoolWax" label. The guns with the "Woolwax" labels are the newest inventory from the manufacturer. These guns are designed specifically for Fluid Film NAS undercoating..
Check Stock
4 Pcs Soldering Nozzles for Hot Air Gun SMD Rework Station 853d 862d Replacement
- [Great Compatibility]: 4 Pieces of hot air gun nozzles include 3 round nozzles of 5mm, 8mm and 10mm and 1 square nozzle of 13mm, compatible for 853D, 878D soldering station and other hot air guns, applicable to our soldering station models: YES0367, YES0368, YES0369, YES0370, YES0371, YES0372, YES0373, YES0374, YES0375, any inquiry is welcome.
- [Practical Usage]: Nozzles of different size and shape are ideal for regulating the hot wind size and shape to heat different kinds of electronic components, 24mm diameter nozzle interface adapts to many hot air guns, easy to be installed.
- [Useful Lock Screw]: With lock screw for locking the nozzle firmly to avoid hot air flow out from the gap between the nozzle and the heat gun air outlet steel pipe, and reduce temperature irregularity.
- [Durable Material]: Sturdy and durable metal material not easy to rust and damage, suitable for long time use.
- [Soldering Nozzle Size]: 3 Round nozzles sizes are 5mm, 8mm, 10mm.
Check StockSteinel Reflector Nozzle - for Soldering and Bending Pipes or thawing Frozen Pipes, Nozzle Diameter of 1.30 inches, Formed from high-Grade und Polished Stainless Steel, 07051
- This nozzle is suitable for such applications as soldering, bending plastic tubing, and applying heat shrink tubing.
- Fits heat guns with a nozzle diameter of 1.30 inches.
- For professional hot air guns, as well as hot air guns like HL 2010 E, HL 1910 E and HL 1610 S.
- Formed from polished stainless steel for durability.
Check StockWagner Spraytech 0503148 Wagner HT Accessories Heat Gun Nozzles Metal
- HEAT GUN NOZZLE ACCESSORY KIT: This Wagner heat gun nozzle accessory kit includes multiple attachments to better fine tune and control your heat....
- FLARE NOZZLE: The included flare nozzle is great for spreading heat for wider coverage.
- EDGE PROTECTOR NOZZLE: The edge protector nozzle protects glass surfaces and other delicate areas from direct heat while using the gun.
- CONCENTRATOR NOZZLE: The included concentrator nozzle is ideal for precise heating application.
- COMPATABILITY: These heat gun nozzles are compatible with the Wagner HT1000, 1100, 3500, MotoCare Variable Temp, and MotoCare Dual Temp heat guns.
Check StockWeldingCity 5-pk Gas Nozzle 169-715 169715 1/2
- Premium gas nozzles (2-pk and 5-pk) for MIG welding gun in Miller Millermatic/MIGmatic and Hobart welders..
- Gas nozzle 169715 (1/2" orifice, flush tip) for use with MIG welding gun M-10/M-15 (M-100/M-150) in Millermatic 135, 140, 175, 180, 210, 211, Passport and Passport Plus. Also replacement for gas nozzle 770-404 for some Hobart MIG welding guns such as H-9/H-10..
- Gas nozzle 16972X and 200258 for use with MIG welding gun 150A - 400A M-25/M-40 series in Millermatic welders. 1/2" and 5/8" orifice.
- tip-nozzle relationship recessed/flush/stick-out as per illustrated nozzle length for various part numbers..
- Refer to your MIG welding gun user manual for selection of correct gas nozzle. Package of 2-pk and 5-pk. Volume discount available. Buy More Save More!.
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock12\ Flexible Grease Hose by Cal-Hawk
- Flexible Heavy Duty Nylon Hose to reach difficult areas.
- Prevents excess of grease when the nozzle is at a small angle to the grease fitting.
- To be used on hand operated grease guns only.
- 1/8" NPT Female and Male End can fit all standard grease guns.
Check Stock
AVID POWER 1500W Heat Gun with Variable Speed, Hot Air Gun 122-1022, 3-Temp Settings, Five Nozzle Attachments for Crafts, Tube Bending, Stripping Paint
- Variable Temp Control & 3-Temp SettingsUnlike other dual temperature heat guns, Avid Power heat guns provide variable temperature control and strong power to quickly heat up to 1022. Three temp settings [I:122250L/min, II:752 250L/min, III:1022500L/min] are suitable for various heating applications..
- Cooling Mode & Overheating ProtectionThe cooling mode 122(50) design makes it easier to cool down the material from high temperature. Professional built-in overheating protection also prevents heat gun from being damaged..
- Five Nozzle AttachmentsThis hot air gun includes four different nozzles and a triangular scraper. Perfect for crafts, paint and adhesive removal, heat shrinking tubing, shaping PVC tubes, thawing frozen pipes, removing rusted bolts and more..
- Ergonomic DesignWith the ventilation slot, heat dissipation system can cool down motor during operation.
- Rubber-covered handle for comfortable grip. Front protection tube could be disassembled for working in narrow places..
- Package IncludeHeat Gun with 6.2Ft/1.9m cord, five attachments (1pc reflector nozzle, 1pc deflector nozzle, 2pcs reduction nozzles and triangular scraper), user manual. If you receive a defective item, please contact us for further assistance..
Check StockPaper Lanterns
- ...ientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders.
- Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose.
- ▶ 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface.
- Two concentrator nozzles direct a concentrated heat flow to the work surface.
- Reflector nozzle disperses heat flow evenly around the whole work surface..
- ▶ 【100% Satisfaction Guarantee】 Full refund or return guarantee with lifetime free warranty. Anything happened about the product, please feel free to contact us at any time, we will be always here for you.
Check StockM MINGLE Turbo Nozzle for Pressure Washer, Rotating Nozzle and 5 Tips, 1/4 Inch Quick Connect, 3600 PSI, Orifice 2.5
- Turbo nozzle pressure washer is designed for hot and cold water in pressure washer. Max Temperature for water is up to 100℃ ( 212°F ). Max Pressure is up to 3600 PSI. Orifice Size is 2.5..
- Pressure washer rotating nozzle has 1/4” disconnect fitting to make cleaning work more efficient. Fits most brands of pressure washer wands or guns..
- Rotary pressure washer tip creates a powerful rotating jet, increase both the intensity and cleaning area of the nozzle..
- Power washer spray nozzle cleans up to 40% faster than standard nozzles. Ideal for cleaning soiled bricks, concrete, vinyl and any other large amount of dirty or heavily soiled areas..
- 5 pcs nozzle tips with different spray patterns. Red one 0°, yellow one 15°, green one 25°, white one 40°, black one 65°. Choose different angles of spray nozzle according to the actual need..
Check StockHobart 770487 Gasless Fluxed Cored Nozzle for Handler 125 EZ
- For handler 125EZDescriptionHobart Flux-Cored 1/2in. Welding Nozzle fits Hobart Handler 125, 140, 187, 190, 210, 210MVP and TREK 180 welding guns. 1/2in. size. Product Type: Nozzle, Product Style: Flux-cored, Size: 1/2 in., Works With: Hobart Handler welder.
Check Stock
