Reviews Nozzle Diameter Options

G830 2.0 Gelcoat Spray Gun

  • ... trigger, air flow control valve, housing, spring hook).
  • 1 x 4mm Spray Nozzle FN5 5/32" (with sealing ring).
  • 2 x 1000ml Plastic Cup (with metal cup cover).
  • 【MAIN PARAMETERS】Air source pressure: 0.3-0.6Mpa, Cup volume: 1L, Measuring Cup: 500ml, Spray Nozzle: (4mm) FN5 5/32", Nozzle outer diameter: 5.0, Nozzle inner diameter: 3.0, Package size: 23cm x 23cm x 17cm (9'' x 9'' x 6''), Shipping weight: 1.4kg/3lbs..
  • 【OPERATION METHOD】According to the viscosity of the gel coat, choose the nozzle with the right diameter. In the nozzle and jet, the gun and the gun body and the lid and the material apply grease to the joints such as the cup. Then cover the cup on the cup filled with the material and press the lid.
  • Force the nozzleinto the air vent in front of the gun until the nozzle shows the air vent.
  • Hold thehandle and hold the gun. The air is ejected from the air jet..
  • 【WIDE APPLICATION】This gun will spray faster than conventional HVLP guns and will clean up in just a few minutes.This gun is used for spraying not only gelcoat, but other materials such as parting films, spray gypsum, tooling gelcoats, sandable primers, granite enhanced gelcoats, adhesives and paints..
  • 【OPERATION TIPS】The nozzle should always face upward ....
Check Stock

Makita PR00000034 1-3/8\ Welding Nozzle

  • WELDING NOZZLE SUPPORT: PVC floor round welding nozzle with wheels, can be used with welding wire, with rollers to guide the welding seam straighter..
  • WELDING NOZZLE WITH WHEEL: The welding nozzle with wheel can be directly fixed on the hot air gun. When there is a wheel, the wheel can be directly attached to the gap, and the gap can be filled evenly along the line of the gap, which can solve the manual filling of the weld. The filling is not straight..
  • WELDING ROD SPECIFICATIONS: Hot Air Gun Welding Nozzle can use 3mm/4mm/5mm..
  • WELDING NOZZLE WITH WHEEL ADAPTER: 8mm inner diameter of the heat gun nozzle, which can be matched with any other welding nozzle with an outer diameter of 8mm..
  • MATERIAL: 304 stainless steel alloy, with good corrosion resistance and heat resistance, can withstand high temperatures of 800-1000℃, will not rust, oxidize, and deform under high temperature for a long time. It is an ideal accessory for plastic welding..
Check Stock

HOMEDEC Shower Body Spray Showerhead Brass Wall Jet (Matte Black - 4pcs)

  • Single-function 34-nozzle body spray delivers a soothing spray..
  • Fully adjustable spray face allows for a variety of Wall-mount concealed installation options..
  • Face Diameter: 120x130mm(4.7X5.1 inch). Spray face is easy to clean..
  • G1/2-inch connections fits standard American, comes with small tools for quick installation..
  • Low profile design complements any décor. Matte Black finishes resist corrosion and stains..
Check Stock

Wangdd22 15pc/Set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
  • Quanlity:15pcs/lot (5 piece 1.75mm Nozzle Inputting Tube,5 piece 3D Printer 0.4mm Extruder Brass Nozzle Print Head,5 piece Heater Blocks Hotend).
Check Stock

Onyehn 22pcs/Lots A8&A2 3D Printer Part Each 5PCS 0.4mm Extruder Nozzle Print Head+1.75mm Teflon Throat Tube+Heater Blocks Hotend for MK8 Makerbot Reprap

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
  • Quantity:22pcs/lot (5x 3D Printer Nozzle Throat Tube 5x Nozzle Print Heads 5x Heater Blocks Hotend 5x M6 nuts 2x Hex Key Wrenches (for MK8 Makerbot....
Check Stock

Magic&shell Ceramic Sandblast Nozzle 10PCS Air Sandblaster Tips For Pneumatic Blasting 5mm and 6mm Inner Diameter

  • Product Name: Ceramic Nozzle.Material: Ceramic..
  • Outside diameter:15mm/0.59Inch.Bore diameter: 6mm/0.24Inch,5mm/0.20Inch.Length: 38mm..
  • Color: Pink.Package Includes:5 PCS 5mm Inner Diameter Ceramic Nozzle,5 PCS 6mm Inner Diameter Ceramic Nozzle..
  • Strong wear resistance, long life, cost saving, good electrical insulation at high temperature..
Check Stock

Kitchen Faucet Head Replacement, Kitchen Sink Faucet Replacement Parts, Kitchen Faucet Sprayer Nozzle, Splash-proof Spayer Head, Pull-out Sprayer Head, 3-Function, Matte Black PAKING PB3002

  • THREE-FUNCTION SPRAYER HEAD: 1.Stream Flow rate: 1.8 GPM.
  • 3. Sweep Spray.  The splash-proof spray design is the biggest feature of the nozzle, which is so soft and delicate that it produces little splashes to the kitchen sink..
  • NON-RETURN VALVE DESIGN: Built-in non-return valve works to prevent water backflow. It immediately shuts off the water when the kitchen faucet is switched off, with no more dripping..
  • SPRAYER HEAD CONNECTION: The connection (outer diameter) of our sink faucet head is G1/2" male thread size and the 5/8 UNEF without the connector for options. Please confrim the thread size before ordering..
  • SPRAYER HEAD CONNECTION: The connection (outer diameter) of our sink faucet head is G1/2" male thread size and the 5/8 UNEF without the connector for options..
  • DIMENSION: Overall Width: 6.69 '' Thread Height: 0.5 '' Overall Height Exclusive the Thread: 3.93'' Connection attached to the hose: G1/2 male thread size.
Check Stock

1 1/4" Vacuum Attachments Brushes for Small Shop Vac Accessories 1/4 inch or 1 3/8 inch Vacuum Cleaner Accessories

  • Vacuum Accessories and Attachments are 1 1/4" inner diameter attachments(The inner diameter is 1-1/4inch(32mm), which means your wand or hose outside diameter of should be smaller than 1-1/4inch(32mm) which is 31mm or 30.5mm.
  • 1 1/4'' horsehair bristles round brush, for cleaning and dusting tables and counter tops, air and heating vents, mini and vertical blinds.
  • 1-1/4'' Nozzle Combination Tool, designed to clean the crevice and dust the board.NOT for shark vacuum attachments,DON’T for hoover vacuum attachments,DON’T fit the OEM hose,Not for rigid vacuum,DON’T fit dewalt shop vac,DON’T fit Dirt Devil model .
  • 1 1/4'' Vacuum Attachment Wet or dry vacuum crevices tool for cleaning tight spaces. 1 1/4'' utility nozzle with plastic brush, the brush can be removed, for floor cleaning.
  • Vacuum cleaner accessories set includes 1.25" brush & nozzle combination tool, 1.25" round brush, 1.25" flexible flat suction nozzle, 1.25" upholstery tool brush,1.25" utility nozzle with brush, 1.25" crevice nozzle tool.....
Check Stock

Gel Coat Spray Gun Gelcoat Dump Gel Coat Sprayer Air Spray Gun Painting Tool Kit for DIY Home Fiberglass Spraying Coating Tool 0.3-0.6Mpa with Spray Nozzles

  • 1 x 4mm Spray Nozzle FN5 5/32" (with sealing ring).
  • 2 x 1000ml Plastic Cup (with metal cup cover).
  • 【MAIN PARAMETERS】Air source pressure: 0.3-0.6Mpa, Cup volume: 1L, Measuring Cup: 500ml, Spray Nozzle: (4mm) FN5 5/32", Nozzle outer diameter: 5.0, Nozzle inner diameter: 3.0, Package size: 23cm x 23cm x 17cm (9'' x 9'' x 6''), Shipping weight: 1.4kg/3lbs..
  • 【OPERATION METHOD】According to the viscosity of the gel coat, choose the nozzle with the right diameter. In the nozzle and jet, the gun and the gun body and the lid and the material apply grease to the joints such as the cup. Then cover the cup on the cup filled with the material and press the lid.
  • Force the nozzleinto the air vent in front of the gun until the nozzle shows the air vent.
  • Hold thehandle and hold the gun. The air is ejected from the air jet..
  • 【WIDE APPLICATION】This gun will spray faster than conventional HVLP guns and will clean up in just a few minutes.This gun is used for spraying not only gelcoat, but other materials such as parting films, spray gypsum, tooling gelcoats, sandable primers, granite enhanced g....
Check Stock

ExcelFu 5pcs 30MM Length Extruder 1.75MM Teflon Throat Tube and 5pcs 0.4MM Brass Extruder Nozzle and 5pcs Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer (Bonus: 2pcs hex Key Wrenches)

  • 5x 3D Printer Nozzle Throat Tube + 5x Nozzle Print Heads + 5x Heater Blocks Hotend + 2x Hex Key Wrenches(for MK8 Makerbot Reprap Prusa I3 3D Printer).
  • Nozzle Throat Tube: Material - Stainless Steel.
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D printer, works with Anet A8.
Check Stock

Le Lematec Soda Blaster and Sandblaster Long Nozzle Attachment Bundle

  • Heavy-duty Soda Blaster with long nozzle attachment combo for spot sandblasting and detailing. Bring this bundle to any workshop or garage for quality and reliable performance to achieve quality results..
  • The AS118 Soda Blaster gives you a clean finish that's fast and easy. This powerful blaster removes paint, rust, grease, and much more. Use it on cars, trucks, farm equipment and tools - or simply give your grill a good cleaning. Steel Nozzle Allows Precise Blasting- With a range of 90-150 PSI..
  • Restore parts and objects fast with this long nozzle sandblasting tip for spot and detail blasting. Remove rust, dirt, and grime on target areas with minimal media waste. Long replacement nozzle for precise sandblasting: Inner diameter 5.3 mm, Outer diameter 8 mm, Length of tube 16.5 cm..
  • Perfect bundle for any blasting lets you configure nozzle attachments according to your blasting preference..
  • Add more power and flexibility to your sandblaster with the long nozzle attachment..
Check Stock

Garden-Hose-Nozzle,NARUNDREN Heavy-Duty Metal Water Hose Nozzle with 8 Adjustable Spray Patterns HIGH-Pressure Hose Nozzle for Watering Garden Washing Cars and Showering Pets

  • 10 WATERING OPTIONS: choose between a light mist to a heavy jet, and a wide range in between, with this garden sprayer you can water your plants, wash....
  • EASY GRIP: Designed with an easy grip and on/off thumb control, this water hose nozzle lets you spray without exerting pressure on a handle..
  • HANDLES RUBBERIZED: thick rubber coating ensures a comfortable, non-slip grip, in addition to providing protection from hot or cold water flow....
  • LEAKPROOF NOZZLE: The garden hose sprayer tightly screws onto the hose to ensure there is no leaking or dripping. 2 attachment rubber gaskets....
  • PERFECT FIT: The spray nozzles for garden hose adapts to any garden hose with a head diameter of ¾ inch..
Check Stock

Karcher WD 5/P Multi-Purpose 6.6 Gallon Wet-Dry Vacuum Cleaner with Attachments – Blower Feature, Semi-Automatic Filter Cleaning, Space-Saving Design, 1100W - 2022 Edition

  • ...acuum outlet with auto start and stop delivers on-the-job, hands-free convenience. Dirt or shavings created during planning, sawing, or sanding is removed directly.
  • Extended Reach: Features a cleaning radius of 42 feet - Includes a 26.25' cord, an 11.5' hose, optional 3' extension tubes, and 16" for the machine diameter.
  • Versatile Cleaning Options: Includes an 11.5' hose, two 20" suction tubes, crevice nozzle, hand grip nozzle, standard floor nozzle (with interchangable rubber and brush strips), power tool adapter, pleated filter, and fleece filter bag.
Check Stock