Reviews Non valved Barbs

Kegco LHU5S-3 Elite Series Three Product Secondary Regulator

  • The Kegco LHU5S-3 has been designed for applications where you will be reducing the pressure off your primary regulator to dispense three kegs at different pressures.
  • To use this secondary regulator, you will still need a primary regulator with one output that connects to the secondary with a piece of air line.
  • Boasts three stylish black pressure gauges with high-contrast red and white writing and sturdy rubber boots that help protect them from damage.
  • Durable chrome-plated brass body has three gauges and three 5/16″ barbs for dispensing three kegs of beer or kombucha at a time.
  • Features manual pressure release valves and internal pressure relief valves that release pressure at 55-65 PSI to help ensure safety.
Check Stock

SMOQIO Beer Bong,Beer Funnel with with Valve, Single Header, Bonus Bottle Opener, 1 Pack

  • Boredom be gone! beer Bong Funnel for chugging competitions and fun! Bring your birthday/wedding/bachelor/pool/graduation parties to climaxes! Let’s get fun!.
  • 4 options. 1pk single header for solo. 2pk single header for 1 on 1. 1pk double header for pair-work. 2pk double header for 2 on 2 and challenge beer. Bonus pocket bottle opener..
  • No leaks. Funnel stem and valve stems are longer and have stronger barbs for tight fit. Besides, there are 2 rubber seal rings inside every valve to prevent leaks and drops..
  • Bigger, higher, faster! A larger funnel is more fun. Drinking 60fl oz / 1800ml (5 cans) beer at one time! Dia: 8in/20.3cm. Hgt: 6.5in/16.5cm. Valve resists frequent uses with no leaks at all..
  • Extra-Long tube for torrential beer! 2.5ft tube with a 3/4in / 2cm large diameter. Thick(3mm) and ZERO kinks. Odor free. Stuff up for use, pull out for cleanup/storage..
Check Stock

attwood Sahara MK2 800 GPH 12-Volt Automatic Bilge Pump

  • 800 GPH, 12V, Fuse size: 4A, Outlet type: 3/4" & 1" barbs, Check valve: yes, Wire length: 29 1/2".
  • The easiest, most reliable automatic bilge pump ever designed.
  • The only automatic bilge pump that eliminates air-locks, Patented X-Air Impeller ejects trapped air in the pump and pipework.
  • Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation.
  • Single-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat’s hull.
  • Universal Backwards Compatible Design: 7-pump mounting hole pattern for replacing any top bilge pump in its category.
  • SteadySwitch: Buoyancy control reduces cycling, draining the bilge not the battery.
  • No Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridge.
  • Improved Motor Cooling/Heat Dissipation: Prevents overheating that may cause failures, such as blown fuse, leaking, etc..
  • Includes straight outlet and check valve.
Check Stock

280 Pcs Barbed Connectors Irrigation Fittings Kit,Drip Irrigation Barbed Connectors 1/4 Tubing Fittings Kit for Flower Pot Garden Lawn Straight Barbs,Single Barbs,Tees,Elbows,End Plug,4-Way Coupling

  • Easy to storage and install: These irrigation kits have a box, convenient and will not leak easily，just push the tubing firmly over the barbs for a tight fit, they don‘t need others tools. Please put these drip irrigation accessories in 70-80 ° water for 10 seconds before assembly, the tube will remain tight after cooling.
  • Large quantities: 280 matching kits total, Hose Elbows Fittings (25pcs), Barbed Hose End Plug (25pcs), Oblique Barbed 4-way Connector (25pcs), Single barbs (30pcs), Straight Barbs (100pcs), Oblique Barbed Tees (75pcs).
  • High-quality materials: These irrigation fittings are made of high-quality plastics, safe and non-toxic, with strong pressure resistance, durability and corrosion resistance, lightness and wear resistance, can maintain you for a long time and have a long service life..
  • Widely used: These drip irrigation accessories connectors are ideal for vegetable gardens, flower beds, elevated garden beds, lawns, gardens, vineyards, forest gardens, farm, residential, greenhouse gardening, and agricultural irrigation applications, with strong practicability for you.
  • Note: Please confirm your size before purchasing. These irrigation kits are designed with barbs and can be used to connect 1/4 inch drip irrigation pipes. Please check....
Check Stock

204Pcs Barbed Connectors Irrigation Fittings Kit,Drip Irrigation Barbed Connectors 1/4 Tubing Fittings Kit for Flower Pot Garden Lawn Straight Barbs,Single Barbs,Tees,Elbows,End Plug,4-Way Coupling

  • Easy to storage and install: These irrigation kits have a box, convenient and will not leak easily，just push the tubing firmly over the barbs for a tight fit, they don‘t need others tools. Please put these drip irrigation accessories in 70-80 ° water for 10 seconds before assembly, the tube will remain tight after cooling.
  • Large quantities: 204 matching kits total, Spray (14 pcs), Micro Drip (12pcs), Tees (50pcs), Drip Emitter (18pcs), Oblique Barbed 4-way Connector (10pcs), Barbed Hose End Plug (20pcs), Hose Elbows Fittings (20pcs), Single barbs (20pcs), Straight Barbs (40pcs).
  • High-quality materials: These irrigation fittings are made of high-quality plastics, safe and non-toxic, with strong pressure resistance, durability and corrosion resistance, lightness and wear resistance, can maintain you for a long time and have a long service life..
  • Widely used: These drip irrigation accessories connectors are ideal for vegetable gardens, flower beds, elevated garden beds, lawns, gardens, vineyards, forest gardens, farm, residential, greenhouse gardening, and agricultural irrigation applications, with strong practicability for you.
  • Note: Please confirm your size before purchasing. These irrigation kits are designed with barbs and can be used to connect 1/....
Check Stock

attwood Sahara MK2 500 GPH 12-Volt Automatic Bilge Pump

  • 500 GPH, 12V, Fuse size: 3A, Outlet type: 3/4" & 1" barbs, Check valve: yes, Wire length: 29 1/2".
  • The easiest, most reliable automatic bilge pump ever designed.
  • The only automatic bilge pump that eliminates air-locks, Patented X-Air Impeller ejects trapped air in the pump and pipework.
  • Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation.
  • Single-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat’s hull.
Check Stock

heidifeathers 25 Triangular Felting Needles - 5 Different Sizes

  • 5 Different Guages 32g, 36g, 38g, 40g, 42g.
  • The 32 (silver) Gauge has 3 barbs a side - coarse fibres.
  • The 36 (green) + 38 (red) Gauge has 3 barbs a side - starting and shaping.
  • The 40 (blue) Gauge has 2 barbs a side - detail. The 42 (gold) Gauge has 1 barb a side - fine detail.
Check Stock

VersaCap 83mm (83B) Carboy and Bottle Caps, Open Cap with Tangle Free Hose Barb Adapter, Two 1/4 Inch Barbs for 1/4 Inch ID Tubing

  • Variety of top-connection configurations available.
  • Available in Industry Standard 83B and wide-mouth 120mm sizes.
  • Quick-Connect hose-barbs with valved sockets for easy port change.
  • VersaCaps are molded from autoclavable polypropylene.
Check Stock

190 Pcs Barbed Connectors Irrigation Fittings Kit,Drip Irrigation Barbed Connectors 1/4 Tubing Fittings Kit for Flower Pot Garden Lawn Straight Barbs,Single Barbs,Tees,Elbows,End Plug,4-Way Coupling

  • Easy to storage and install: These irrigation kits have a box, convenient and will not leak easily，just push the tubing firmly over the barbs for a tight fit, they don‘t need others tools. Please put these drip irrigation accessories in 70-80 ° water for 10 seconds before assembly, the tube will remain tight after cooling.
  • Large quantities: 190 matching kits total, Spray (8 pcs), Micro Drip (10pcs), Tees (40pcs), Drip Emitter (18pcs), Oblique Barbed 4-way Connector (10pcs), Support Stakes (40pcs), Barbed Hose End Plug (20pcs), Hose Elbows Fittings (20pcs), Single barbs (20pcs).
  • High-quality materials: These irrigation fittings are made of high-quality plastics, safe and non-toxic, with strong pressure resistance, durability and corrosion resistance, lightness and wear resistance, can maintain you for a long time and have a long service life..
  • Widely used: These drip irrigation accessories connectors are ideal for vegetable gardens, flower beds, elevated garden beds, lawns, gardens, vineyards, forest gardens, farm, residential, greenhouse gardening, and agricultural irrigation applications, with strong practicability for you.
  • Note: Please confirm your size before purchasing. These irrigation kits are designed with barbs and can be used to connect 1/4....
Check Stock

CO2 Distributor Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold, Co2 Air Manifold, Kegerator Splitter, 2-way Kegerator Distributor Manifold 1/4" with Integrated Check Valves by MRbrew

  • ...k valve with a check valve. Check valves are very important to keep the beer from backflowing into your system!.
  • Has predrilled Holes for mounting and you can expand the unit by removing plug and adding an additional valve or additional manifold, so it grows with your system. This manifold features output and input barbs made for 1/4″ Inner Diameter tubing.
  • We have a Satisfaction Guarantee. Letting you know that you have a free replacement or full refund in the case of you being unsatisfied with any part of your Gas Distributor. Without you having to go to the post office or pay for postage in every case..
Check Stock

Clscea Aquarium CO2 Regulator Dual Gauge with Bubble Counter and Solenoid Valve, Single Stage

  • ... CO2 Regulator]The co2 keg regulator has 2 separate output pressure gauges and adjustment knobs that allow the pressure of each beer line to be set independently. Perfect for multiple drafts with different serving pressures. The standard CGA-320 inlet fit the USA CO2 tank with CGA-320 fitting. Welded O.D.5/16" barbs are suitable for 5/16" beer lines, no leakage..
  • [Reliable Service] 2-year warranty and lifetime technical support. We are committed to providing you with quality products and services, please feel free to tell us if any problems, and we would try our best to satisfy you..
Check Stock

FEMELI Unstrung Marking Tags,1.75 x 1.1 Inches Price Tags,1000 Pcs White Merchandise Tags for Sale

  • ENOUGH SIZE FOR WRITING--The size of white Marking Tag is 1.75 x 1.1 inches/44 x 27mm,providing you enough room to write the price or item number on these price labels.
  • GOOD MATCH WITH TAGGING GUN AND TAGGING BARBS---1/8"-diameter pre-cut hole.Tagging needle and tagging barbs both can insert into the hole easily..
  • SOLID AND SMOOTH--Tag was sturdy and none of it was ripped or bent.Price tag still stays intact even it is pulled apart from tagging barbs.Smooth writing surface is good for quick and easy labeling..
  • WIDE APPLICATION-- Perfect for you to hang on shirt T-shit,socks,shoes,backpack,toy, etc. Use for sale distribution, storage or decoration..
  • PACKAGE INCLUDED--1000 pieces of marking tags per pack,sufficient labels for your yard sale and consignment sale..
Check Stock

1518 Pieces Clothes Tagging Applicator Set, Include Handheld Clothing Label Applicator Garment Tag Attacher with 5 Steel Needle and 1512 Barbs Fasteners in 3 Sizes for Fine Tagging Application (Black)

  • Package content: you will receive a clothes tagging applicator, 5 steel needles and 1512 black barbs fasteners, a total of 1518 pieces.
  • Good combination and sufficient quantity to meet your needs.
  • Easy to hold: the handle of the garment tag attacher is reasonably designed to provide a comfortable grip, it does not require too much force to pull the trigger, so as to minimize hand pressure and reduce operator fatigue.
  • 3 Sizes tagging fasteners: you will get 3 different sizes of barbs fasteners, each size has 504 pieces.
  • 1-Inch plastic barbs fasteners are suitable for socks, towels, underwear, 2-inch fasteners can be applied for children’s clothing and shoes, and 3-inch fasteners are suitable for adult clothing.
  • You can choose the suitable barbs fasteners size according to actual needs.
  • Easy to use: clothing label applicator is very easy to use, does not require too much force to load attachments or replace needles.
  • Since the trigger action is fast, The label can be easily pressed, which is suitable for most people.
  • If it gets stuck, open the bolt and take out the glue needle.
  • Wide range of uses: garment tagging machine is s a great tool for attaching labels with number, style and size to clothes, textiles, toys, luggage, bags, rugs etc., suitable for sh....
Check Stock