Reviews Non standard Forging

15' Long hand forged Damascus steel Eagle Kukri Knife, 10 inch long full tang blade, Bull horn scale with steel bolster, Cow hide Leather sheath with belt loop

  • 15" Long hand forged Damascus steel full tang blade Eagle Kukri Knife. Full tang blade goes through all the handle as well in a single piece so full tang blades are durable and stronger than non full tang blades.
  • Natural Bull horn scale with steel bolster. Handle Length is 5 inches with inserting hole. Up to standard Eagle Kukri Knife Comes with a fine quality extra thick and robust leather sheath.
  • Up to standard Eagle Kukri Knife comes with a fine quality extra thick and robust leather sheath that has belt inserting loop..
  • Approximately 6 mm Thick Twist pattern Damascus steel. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel . The sheath has belt inserting loop and can be worn on belt.
  • Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC.
Check Stock

SUADEX Steel Toe Boots for Men Women Work Boots Indestructible Safety Boots Breathable Lightweight Composite Toe Boots for Construction

  • Standard Steel Toe: Featuring a steel toe cap under the synthetic upper that can bear forces of 229J or more and a toe bumper, this winter steel toe....
  • ANSI safety standards:These mens work boots meet ANSI safety standards and feature non-slip, oil-resistant & duarable outsoles for traction & padded....
  • Puncture-proof Kevlar Midsole: The Steel toe boots with lightweight Kevlar midsole protects feet from puncturing during work, features breathable....
  • Rubber+Plastic Outsole: Safety Boots sole make of rubber and plastic, they are not only non-slip, but also lightweight..
  • Occasion: Construction Boots feature chic style for those who engaged in warehouse, construction, exploitation, forging, roofing or manufacture..
Check Stock

4 Pieces Set of 7.5 and 8.5 and 9 inches Long Hand Forged Damascus Steel Blank Blade Skinning Knife Set, 3 to 4.5 inches Cutting Edge, Compact Pocket Knife Blanks

  • 4 pieces Damascus steel full tang blade skinning knives set. Overall 33 inches Damascus steel blade..
  • Set Contains: a) 9" long straight back blade with 4" cutting edge. 3 pins holes and a Mosaic hole. b) 8.5" long trailing point blade skinning knife with 3.5" cutting edge. 3 pin holes and a Mosaic hole. c) 8.5" long pocket drop point blade with 3.5" cutting edge. 3 pins holes and a Mosaic hole d) 7.5" long compact trailing point blade with 3" cutting edge. 3 pin Holes and a Mosaic hole.
  • Full tang blades are considered stronger and durable then non full tang. Up to standard skinning and Pocket Knives..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

4 pieces Damascus steel blank blade set, 7, 8, 9 and 9.5, inches long hand forged blank blade skinning knife set, 2.5 to 4.5 inches long cutting edge, compact pocket knife and skinning knife blades

  • 4 pieces Damascus steel full tang blade skinning knives set. Overall 32 inches Damascus steel blade..
  • Set Contains: a) 9" long trailing point blade with 4.5" cutting edge. 3 pins holes and a Mosaic hole. b) 9" long drop point blade skinning knife with 4" cutting edge. 3 pin holes. c) 7" long pocket spear point blade with 2.5" cutting edge. 3 pins holes and a Mosaic hole d) 8" long compact straight point blade with 3" cutting edge. 3 pin Holes and a Mosaic hole.
  • Full tang blades are considered stronger and durable then non full tang. Up to standard skinning and Pocket Knives..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

Furuian Steel Toe Shoes for Men Lightweight Indestructible Work Sneakers for Women Puncture Proof Comfortable Slip On Safety Shoes for Industrial,Coustruction

  • 【Cushioned MD Sole & Breathable Upper】：These steel toe tennis shoes use our latest advanced design to provide the most suitable cushioning.So you will feel very soft and light.when you wear these safety shoes.And the breathable fabric will keep your feet dry.
  • 【Indestructible Shoes With Steel Toe Cap】:The Furuian safety shoes use the European standard steel cap that goes beyond ASTM f2412-11 standard, so you won't worry about any injury to your feet as long as you wear our steel toe shoes.
  • 【Memory Foam Insole & Puncture-proof Midsole】:Memory foam insole with arch support, give you a comfortable for all day wear.Kevlar midsole provides strong protection from iron filings and nails.
  • 【Non-slip & Durable Outsole】These steel toe work shoes meet "GB/T-3903" Wear-resisting standard and "DB44∕T 1713-2015" Non-slip standard. The pattern of the sole mimics the anti-skid tyre and increases the anti-skid groove to ensure the ground grasping performance of the mountain and snow & ice covered road..
  • 【Multi-use】As a stylish safety shoes, it's great for construction site, exploitation site, forging workshop or manufacture. In addition, they are also can work as hiking, mountain, climbing shoes..
Check Stock

Furuian Steel Toe Shoes for Men Lightweight Indestructible Work Sneakers for Women Puncture Proof Comfortable Slip On Safety Shoes for Industrial,Coustruction

  • 【Cushioned MD Sole & Breathable Upper】：These steel toe tennis shoes use our latest advanced design to provide the most suitable cushioning.So you will feel very soft and light.when you wear these safety shoes.And the breathable fabric will keep your feet dry.
  • 【Indestructible Shoes With Steel Toe Cap】:The Furuian safety shoes use the European standard steel cap that goes beyond ASTM f2412-11 standard, so you won't worry about any injury to your feet as long as you wear our steel toe shoes.
  • 【Memory Foam Insole & Puncture-proof Midsole】:Memory foam insole with arch support, give you a comfortable for all day wear.Kevlar midsole provides strong protection from iron filings and nails.
  • 【Non-slip & Durable Outsole】These steel toe work shoes meet "GB/T-3903" Wear-resisting standard and "DB44∕T 1713-2015" Non-slip standard. The pattern of the sole mimics the anti-skid tyre and increases the anti-skid groove to ensure the ground grasping performance of the mountain and snow & ice covered road..
  • 【Multi-use】As a stylish safety shoes, it's great for construction site, exploitation site, forging workshop or manufacture. In addition, they are also can work as hiking, mountain, climbing shoes..
Check Stock

Furuian Composite Toe Shoes for Men Women Lightweight Steel Toe Shoes Work Sneakers for Women Puncture Proof Comfortable Slip On Safety Shoes

  • 【Cushioned MD Sole & Breathable Upper】：These steel toe tennis shoes use our latest advanced design to provide the most suitable cushioning.So you will feel very soft and light.when you wear these safety shoes.And the breathable fabric will keep your feet dry.
  • 【Indestructible Shoes With Steel Toe Cap】:The Furuian safety shoes use the European standard steel cap that goes beyond ASTM f2412-11 standard, so you won't worry about any injury to your feet as long as you wear our steel toe shoes.
  • 【Memory Foam Insole & Puncture-proof Midsole】:Memory foam insole with arch support, give you a comfortable for all day wear.Kevlar midsole provides strong protection from iron filings and nails.
  • 【Non-slip & Durable Outsole】These steel toe work shoes meet "GB/T-3903" Wear-resisting standard and "DB44∕T 1713-2015" Non-slip standard. The pattern of the sole mimics the anti-skid tyre and increases the anti-skid groove to ensure the ground grasping performance of the mountain and snow & ice covered road..
  • 【Multi-use】As a stylish safety shoes, it's great for construction site, exploitation site, forging workshop or manufacture. In addition, they are also can work as hiking, mountain, climbing shoes..
Check Stock

Whole Earth Supply Extra Large - Raindrop Damascus Tracker Blank Blade Knives Knife Making Blanks

  • Overall 11 inches Long hand forged full tang Damascus steel tracker knife blank blade.
  • 6 inches long cutting edge. Up to standard Tracker and camping Knife blank blade.
  • 4.5" long Scale space with 3 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick fire pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low....
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

Staple Removers Staple Pull Office Staple Removal Tool Hand-held Comfort and Energy Saving, no Damage to Paper(Pink and Blue)

  • Package includes--one pack is blue color,and the other is pink color staple remover.
  • Steel forging high hardness, good toughness, strong and durable, will not rust,non-slip plastic handle,Staple remover tool--suitable for office,school and home using.
  • Product quality 100% guarantee,YUEKUI provide the most perfect after-sales service, please rest assured to buy..
Check Stock

Blacksmithing 4LB Bladesmith Handmade Forge Hammer Anvil Hammer Metal Forged Knife Making Blacksmith Forging Tools

  • 【Must Have Tool】The 4LB Forging Hammer is an ideal forge tool for any blacksmith / farrier / knife maker or tool collector. It has excellent results in metal forging, knife making and other forge work..
  • 【High Strength Hammer Head】Manufactured from high strength heat treated steel, the hammer head is super sturdy and can provide a very large knockout force when forging. After quenching treatment, its density and strength are greatly increased, and the hammer body is more solid and not deformed. Features with high temperature resistance, good wear resistance and long using life. Saving time and money..
  • 【Premium Wooden Handle】The wooden handle is made from premium wood, strong and durable. Using mechanical handle design, the middle to do recessed processing, not only non-slip oil-resistant, but also beautiful and comfortable..
  • 【Special Embedding Technology】With special embedding process, the hammer head and handle are tightly connected and not easy to fall off, which effectively improves the working efficiency..
  • 【100% Satisfaction Guarantee】The johntruck Team aims ....
Check Stock

C.S. Unitec | Non-Sparking & Non-Magnetic Aluminum Bronze Socket Wrench Set |16pc 3/4 inch Drive Socket Set 1-5/16 to 2 inch,EX1540-KIT A

  • Our Tools are specially manufactured with Copper- Beryllium alloys or Aluminum Bronze alloys for Non-Sparking, Non-Magnetic, and Corrosion Resistance. Safe to be used in hazardous environments, ATEX and EX Zones..
  • This industrial quality hammer welding tool is designed to eliminate the risk of sparks at sites where explosive atmospheres may be present such as flammable or combustible vapors, liquids, dusts or residues..
  • Non-Metallic benefits of these alloys make them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets..
  • Advanced forging technology ensures the high quality and refined appearance of all our products.
  • LIFETIME WARRANTY: Advanced forging technology ensures the high quality and refined appearance of all our products. We are offering warranty against breakage or performance failure under normal use..
Check Stock

8 inches Long Hand Forged Damascus Steel Blank Blade Skinning Knife with 3 Pin Hole & an Inserting Hole Space 4 inches Cutting Edge

  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Overall 8 inches Long hand forged full tang Damascus steel blank blade.
  • 4 inches long cutting edge. Up to standard skinning and Hunting Knife.
  • 4" long Scale space with 3 Pin and an inserting holes for extra strength of scale..
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

Upgraded Blacksmith Wolf Jaw Tong & Professional Blacksmiths’ Hammer Set, Replace OEM#0000811-1000 Cross-Peen Swedish Pattern Hammer (16 in (400 mm))

  • 【Must Have Tool】The 4LB Forging Hammer is an ideal forge tool for any blacksmith / farrier / knife maker or tool collector. It has excellent results in metal forging, knife making and other forge work..
  • 【High Strength Hammer Head】Manufactured from high strength heat treated steel, the hammer head is super sturdy and can provide a very large knockout force when forging. After quenching treatment, its density and strength are greatly increased, and the hammer body is more solid and not deformed. Features with high temperature resistance, good wear resistance and long using life. Saving time and money..
  • 【Premium Wooden Handle】The wooden handle is made from premium wood, strong and durable. Using mechanical handle design, the middle to do recessed processing, not only non-slip oil-resistant, but also beautiful and comfortable..
  • 【Special Embedding Technology】With special embedding process, the hammer head and handle are tightly connected and not easy to fall off, which effectively improves the working efficiency..
  • 【100% Satisfaction Guarantee】The Johntruck Team aims to provide you the best products and services. Support 30 days returns and 12 months warranty. Please feel free to contact us if you have any question..
Check Stock