Reviews Non ferrous Metal Cast

Stanley 57-532 21-Ounce Compo-Cast Standard Head Soft Face Hammer

  • Uni-Cast construction of non-ferrous materials eliminates sparking and won’t absorb liquids..
  • No exposed metal on face, head or shaft..
  • Dead blow function eliminates bounceback when striking hardened surfaces..
  • Steel reinforced handle provides strength and resists breaking on overstrike..
  • Uni-Cast construction of non-ferrous materials eliminate sparking and won't absorb liquids.
  • Dead-blow function uses steel shot to eliminate bounce back. Handle is reinforced with steel to provide strength and safety and to prevent breaking on overstrike.
Check Stock

Makita B-65399 Impact Gold 14 Pc Titanium Drill Bit Set 1/4 In Hex Shank

  • Titanium nitride (TiN) coating lasts 2.5x longer than non-coated bits.
  • 135 degree split point geometry for faster starts and reduced walking.
  • Impact rated: For use in 1/4 inches Hex impact drivers.
  • For drilling holes in ferrous metal, wood, plastic, non-ferrous metal, cast iron and stainless steel.
Check Stock

Century Drill and Tool 7864 High Speed Steel Reciprocating Saw Blade, 6-Inch by 14T

  • Used for ferrous and non-ferrous metal over 1/8-Inch stainless steel tube PVC cast pipe and nail embedded wood.
  • 1/2-Inch universal shank fits all popular reciprocating saws.
Check Stock

Makita B-40559 Compact Portable Band Saw Blade 32-7/8 18TPI 5/pk stainless

  • Improved Welding Process for Longer Blade Life.
  • Wavy Tooth Set for Clean Cuts in Sheets, Tubes and Pipes.
  • Designed to Cut Non-Ferrous Metal, Mild Steel, Cast Steel and Cast Iron and Stainless Steel.
Check Stock

Simple Welding Rods USA Made - From Simple Solution Now - Aluminum Brazing/Welding Rods - Make Your Repair Stronger Than The Parent Metal Every Time - 10 Rods

  • Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier..
  • Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily..
  • Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast..
  • No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do..
  • Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch..
Check Stock

Simple Welding Rods USA Made - From Simple Solution Now - Aluminum Brazing/Welding Rods - Make Your Repair Stronger Than The Parent Metal Every Time - 20 Rods

  • Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier..
  • Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily..
  • Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast..
  • No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do..
  • Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch..
Check Stock

Makita A-97570 32-7/8 18TPI Compact Portable Band Saw Blade

  • Improved welding process for longer life.
  • Wavy tooth set for clean cuts in sheets, tubes and pipes.
  • Designed to cut non-ferrous metal, mild steel, cast steel, cast iron and stainless steel.
  • For use with the Makita 18V LXT Lithium-Ion compact portable band saw model Xbp01 and other brand 32-7/8" saws.
Check Stock

Freud LU77M010 10-Inch 80 Tooth TCG Thin Kerf Non-Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor

  • TCG Thin Kerf Non-Ferrous Metal Cutting Saw Blade.
Check Stock

YIYITOOLS Screwdriver Bit Set 45 Piece, Impact Driver Bit Set for Drills and Drivers, Assorted Steel Drill Bits in Storage Case for Wood Metal Cement Drilling and Screwdriving,YY2020051

  • Titanium nitride (TiN) coating lasts 2.5x longer than non-coated bits.
  • 135 degree split point geometry for faster starts and reduced walking.
  • Impact rated: For use in 1/4 inches Hex impact drivers.
  • For drilling holes in ferrous metal, wood, plastic, non-ferrous metal, cast iron and stainless steel.
Check Stock

Red Label Abrasives 3 X 79 Inch 80 Grit Metal Grinding Zirconia Sanding Belts 4 Pack

  • Zirconia aluminia is the standard for aggressive cutting, grinding and shaping of metals & very hard wood.
  • Best for heavy grinding, deburring and weld removal of ferrous metal (Steel, Stainless Steel, Cast Iron, Carbon Steel). Also great for non ferrous....
  • Premium top coat grinding aid reduces heat and allows for a cooler running abrasive..
  • Ultra strong and Precision built bi-directional tape joint. Belts can be run in either direction..
  • We are the manufacturer! Factory Direct and built in USA by Red Label Abrasives. Guaranteed or Money Back..
Check Stock

Rocaris 1\ Brown 120 Grit Abrasive Buffing Polishing Wheels Burr For Rotary Tools-1/8\(3mm) Shank 50 Pack

  • 【Size】Shanks are 1/8 inch (3mm), buffing wheels are 1" in diameter, 25 mm abrasive wheel ,120Grit.
  • 【Abrasivr Buffing Wheel Set】25 mm abrasive wheel with 3 mm silver shank and 120 grits,total 50pieces. Suitable for most ferrous and non-ferrous metals, castings, welded joints, rivets, rust, stone, glass.
  • 【Repair The Dents】Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for all types of detail work in both hard and delicate materials..
  • 【Convenient And Practical】 Small buffing wheel is an efficient polishing tool of metal and non-metallic materials in small area of rust deburring and surface polishing, high efficiency, low cost.,used with most rotary tools.
  • 【Widely Applications】Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a tool, fit for rotay tools grinder etc.Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.
Check Stock

Johnson Level & Tool 7748-O Structo-Cast Level - 3 Vial, 48\

  • STRUCTO-CAST LEVEL: The level features a tough non-conductive and non-corrosive Structo-Cast frame that will not scratch fine wood or painted surfaces. It has a magnetic edge that holds to ferrous metal surfaces..
  • ROBUST CONSTRUCTION: The Johnson leveler features durable acrylic vials that are impact-resistant. The fast, easy, and smart level features three easy-read vials for plumb, level, and 45 degrees..
  • EASY TO USE: Quik-Change replaceable vial covers that make it easy to use for you at the job site..
  • IDEAL APPLICATION: The level features a V-groove frame that easily fits on pipe and conduit, making it an ideal and faster choice for plumbing tasks..
  • PRODUCT SPECIFICATIONS: The 48 in. Orange Structo-Cast Torpedo Level is proudly made in the USA..
Check Stock

DEWALT Portable Band Saw Blade, 44-7/8-Inch, .020-Inch, 18 TPI, 3-Pack (DW3983)

  • Improved welding process for longer life.
  • Wavy tooth set for clean cuts in sheets, tubes and pipes.
  • Designed to cut non-ferrous metal, mild steel, cast steel, and stainless steel.
Check Stock