Reviews Non ferrous Metal Alloy

Simple Welding Rods USA Made - From Simple Solution Now - Aluminum Brazing/Welding Rods - Make Your Repair Stronger Than The Parent Metal Every Time - 10 Rods

  • Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier..
  • Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily..
  • Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast..
  • No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do..
  • Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch..
Check Stock

Simple Welding Rods USA Made - From Simple Solution Now - Aluminum Brazing/Welding Rods - Make Your Repair Stronger Than The Parent Metal Every Time - 20 Rods

  • Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier..
  • Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily..
  • Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast..
  • No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do..
  • Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch..
Check Stock

A Dark Heart (Elders and Welders Chronicles Book 2)

  • ️【★TIG&ARC Strong Point】High Frequency Start TIG,Non-Contact Arc Initiation That Reduces Tungsten And Material Consumption.Rated Input Frequency 50/60Hz, Duty Cycle 85%，Improves The Performance Of The Welding Machine..
  • ️【★Feature】TIG/ARC 2-in-1,Tig& ARC Welder With Tig Torch, Earth Clamp, Electrode Holder,Welding Tong.
  • ️【★Portable And Powerful】TIG Welding Thickness 0.3-4.8mm,Stainless Steel, Alloy Steel, Mild Steel, Copper, Cast Iron And Chrome.ARC Welding Thickness 15-42mm.
  • ️【★Energy Saving】Portable Handle Makes It Easier To Operate, The Lightweight Makes It More Convenient To Carry.Suitable For Stainless Steel, Alloy Steel, Carbon Steel, Copper, Copper Alloy And Other Non-ferrous Metal Welding.
  • ️Automatic Compensation For Voltage Fluctuation, Over-voltage Protection, Under Voltage Protection, Over Current Protection, Over Load Protection.
Check Stock

Metal Detector X10 Pro with 9*5\ Coil Waterproof Light Weight Easy to Use Loud Speaker Built-in Rechargeable Battery Perfect for Beginners

  • DETECTION OF 3 TYPES OF METALS: MMD02 provides 3 detection to detect 3 types of different metals, for the 3 different types it will emit the 3 different sounds: a low tone alarm sound for ferrous metals, a medium tone alarm sound for low conductivity non-ferrous metals, and a high-tone alarm sound for high conductivity non-ferrous metals..
  • FANTASTIC DISC BUTTON: By pressing the DISC button of MMD02, you can easily detect certain types of metals: once for ferrous metals, twice to exclude even low conductivity non-ferrous metals, three times to return to normal detection. MMD02 helps to find metal faster, also thanks to the deep detection function. Depending on the depth, different icons will appear on the MMD02 display..
  • FUN FOR EVERYONE: The detection rod of MMD02 can be freely adjusted in length from 61cm to 90cm. Not only is it usable by adults, but it also provides the joy of treasure hunting for kids. The non-slip strip equipped with MMD02 makes it more convenient to carry. The waterproof coil also offers another detection possibility, namely shallow water detection. ? Notice: The detection rod and coil are waterproof, but the detector is not..
  • DETECTION OF 3 TYPES OF METALS: MMD02 provides 3 detection to detect 3 types of different metals, for the ....
Check Stock

Zircon MetalliScanner MT6 Professional Metal Detector

  • Find ferrous and non-ferrous metal up to 6 in. (152 mm) deep in concrete and other non-metallic surfaces.
  • Automatically differentiates between magnetic metal (such as rebar) and non-magnetic metal (such as copper pipe).
  • Shows the depth of metal from the surface in both inches and centimeters.
  • Helps map out the grid of metal through any nonmetallic construction material, including concrete, tile, and marble.
  • Ideal for finding and/or avoiding rebar, cables, pipe, nails in reclaimed wood, nails/tacks in studs behind lath & plaster walls, electrical boxes and conduit, and more.
Check Stock

Zircon 66226 1.5-in Scan Depth PP3 (9V) Metal and Wood Stud Finder

  • Locates ferrous (magnetic) metal behind walls up to 4-Inch (102 mm) deep and non-ferrous (non-magnetic) metal up to 2-Inch (51 mm) deep.
  • Quickly and easily detects metal in wood, drywall, paneling, tile, stucco, plaster, concrete and other non-metallic surfaces.
  • Works as a great stud finder for plaster walls, as well as finding rebar in concrete.
  • Easily finds plumbing, ductwork, rebar, nails and screws in your walls, floors and ceilings.
Check Stock

STARRETT 13582 9\ 7-1/2\X3/4X.032REG10/S Flex Back BANDSAW Blade

  • Excellent fatigue factor to ensure long life on machines running at a high SFM, cutting non-ferrous metal and wood. (Not recommended above 10,000 SFM.).
  • Used to cut materials of low alloy that are not extremely difficult to machine..
Check Stock

STARRETT 10015 1/4X.025X100\ 18W REG Flex-Back Band Saw Blade

  • Made from carbon steel with a flexible back..
  • Excellent fatigue factor to ensure long life on machines running at a high SFM, cutting non-ferrous metal and wood. (Not recommended above 10,000 SFM.).
  • Used to cut materials of low alloy that are not extremely difficult to machine..
Check Stock

7-1/4 X 70 FERROUS ULTRAFINE

  • For 7-1/4-Inch Circular Saws. 1/8-Inch or less Thin Steel thickness Ultrafine cut, 5600+ RPM, Very Thin Steel 18 ga or thinner, 5/8-Inch arbor..
  • Features Freud's Exclusive TiCo Hi-Density Carbide designed specifically for metal cutting applications..
  • Anti vibration Technology reduces noise and extends cutting life and Laser Cut steel blade body for smoother cuts and flatness.
  • Perma-Shield Non-Stick Coating reduces friction, heat build up which adds to longer blade life.
Check Stock

25pcs T118B 75mm Long HCS 6 TPI T Shank Metal Cutting Jigsaw Blades Power Tool Accessories for 3-6 mm Thin Metals Sheet Metal Fine Cut

  • Ideal for cutting sheet metal and thin metals (ferrous and non-ferrous). For thin to medium metals 2/8" to 1/4" (3-6 mm)..
  • 6 TPI tooth profile and high carbon steel blade body for exceptionally fast cutting and long life in thin metals..
  • These jigsaw blades are the economical choice for cutting sheet metal and thin metals (ferrous and non-ferrous). Ideal for straight-line and fast....
  • Made of high carbon steel construction, sturdy and durable, wear resistance and can be use for a long time..
  • Package includes 25 pieces of universal Jigsaw saw blade accessory kit..
Check Stock

Zircon MetalliScanner m40 Handheld Electronic Metal Detector For Use on Dry Wall, Concrete, Lathe and Plaster, Stucco and More

  • Locates ferrous (magnetic) metal behind walls up to 4-Inch (102 mm) deep and non-ferrous (non-magnetic) metal up to 2-Inch (51 mm) deep.
  • Quickly and easily detects metal in wood, drywall, paneling, tile, stucco, plaster, concrete and other non-metallic surfaces.
  • Works as a great stud finder for plaster walls, as well as finding rebar in concrete.
  • Easily finds plumbing, ductwork, rebar, nails and screws in your walls, floors and ceilings.
Check Stock

Bernzomatic NS3 Nickel-Silver Flux Coated Brazing/Welding Rods, 2-Piece

  • 2 pack, nickel silver brazing rod, 85,000 psi tensile strength, 1680 degree to 1750 degree working temperature.
  • Nickel-silver flux coated brazing/welding rods perfect for repairing bicycles, metal furniture, railings, and radiators.
  • Used in joining carbon and alloy steels as well as non-ferrous materials.
Check Stock

Security Airport Walk Through Metal Detector New

  • Professional High Sensitive Walk through Metal Detectors.
  • Infrared emission and the receiver to prevent detection blind spot.100% Ferrous & non-ferrous metal detect..
  • Counter tracks the number of patrons that have passed through the detector,.
  • LED alarm light on column, displaying the area of metal detected accurately..
  • Six interlaced detection regions of the same high with the body and combining.
Check Stock