Reviews Non ferrous Materials

TRIM Cutting & Grinding Fluids 9106/1 Synthetic Coolant, 1 gal Jug

  • RotaMagic Super Concentrated Cutting Fluid is water soluble, biodegradable cutting lubricant that yields a 10:1 ratio when mixed with water.
  • RotaMagic extends tool life and improves cutter performance, Use with ferrous or non-ferrous materials.
  • Will improve surface finish and reduce heat build up when drilling.
Check Stock

Stanley 57-532 21-Ounce Compo-Cast Standard Head Soft Face Hammer

  • Uni-Cast construction of non-ferrous materials eliminates sparking and won’t absorb liquids..
  • No exposed metal on face, head or shaft..
  • Dead blow function eliminates bounceback when striking hardened surfaces..
  • Steel reinforced handle provides strength and resists breaking on overstrike..
  • Uni-Cast construction of non-ferrous materials eliminate sparking and won't absorb liquids.
  • Dead-blow function uses steel shot to eliminate bounce back. Handle is reinforced with steel to provide strength and safety and to prevent breaking on overstrike.
Check Stock

DEWALT 10-Inch Miter / Table Saw Blade, Fine Crosscutting, 80-Tooth (DW3219PT)

Check Stock

3M SPT62MTC-22 Dry Cut Saw,

  • Multi-cutter offers versatility by cutting a wide variety of materials, including ferrous and non-ferrous metals.
  • Specially designed carbide teeth deliver fast, precise, virtually burr-free cuts.
  • Largest capacity in its class with even more capacity than a deep-cut.
Check Stock

TTC 1/4\ C HSS Keyway Broach w/Shim

  • Specialty tools designed for cutting keyways in machined holes..
  • Typically used manually with an arbor press or hydraulic press to produce the keyways..
  • Well suited for use in a variety of ferrous and non-ferrous materials..
  • Hardened and ground bars with cutting teeth on one side..
  • Broach is tapered, allowing teeth to cut keyway to proper depth..
Check Stock

Makita 792555-A Portable Band Saw Blade 44-7/8 x 1/2 24TPI Bi-Metal Stainless Steel

  • BI-Metal construction for up to 3x longer life than carbon blades.
  • 24 TPI configuration ideal for use cutting materials up to 1/8" thick.
  • Makes clean, quick cuts in a variety of ferrous and non ferrous metals.
  • Ideal for cutting a wide variety of materials including, rebar, pipe, all thread and channel.
  • For use with Makita corded and cordless portable band saws as well as competitor 44-7/8" portable band saws.
Check Stock

Drilling, Reaming, Tapping and Milling on the Drill Press (DVD)

  • High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
  • High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
  • Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
  • High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
  • Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.
Check Stock

Lathe Grooving Blade, Lathe Turning Inserts CNC Grooving Cutting Tool (MGMN 150-PCD)

  • MULTIPLE USES: lathe Grooving Inserts can meet a variety of cutting requirements, such as cutting aluminum, copper and its cemented carbide, non-ferrous metals and some non-metals..
  • MATERIAL: CNC lathe Grooving Inserts are made of high-quality diamond materials, with high hardness, high impact resistance, high heat resistance, etc. The Grooving Inserts is not easy to break ..
  • SERVICE LIFE: Due to the high wear resistance and durability of lathe Grooving Inserts, its service life is longer than that of grooved inserts made of general materials, and it is more cost-effective..
  • PRODUCT DESIGN: CNC lathe Grooving Inserts adopts a reasonable and professional design, and the size is also very standard, so the product is stable and reliable in the processing process and has good processing performance..
  • QUALITY ASSURANCE: lathe Grooving Inserts are manufactured through strict standard procedures, and the product quality is qualified. If you have any after-sales problems, please contact customer service and we will deal with it in time..
Check Stock

Freud LU77M010 10-Inch 80 Tooth TCG Thin Kerf Non-Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor

  • TCG Thin Kerf Non-Ferrous Metal Cutting Saw Blade.
Check Stock

Champion Cutting Tool Brute Platinum XLT Tapper: Power Tapper, Tapping Tool

  • High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
  • High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
  • Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
  • High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
  • Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.
Check Stock

Milwaukee 48-39-0572 Sub-Compact Portable Band Saw Blades, 27-Inch 18TPI, 3 Blades per Pack, 2 Pack (6 Blades Total)

  • BI-Metal construction for up to 3x longer life than carbon blades.
  • 24 TPI configuration ideal for use cutting materials up to 1/8" thick.
  • Makes clean, quick cuts in a variety of ferrous and non ferrous metals.
  • Ideal for cutting a wide variety of materials including, rebar, pipe, all thread and channel.
  • For use with Makita corded and cordless portable band saws as well as competitor 44-7/8" portable band saws.
Check Stock

2 inch X 50 YD Sanding Shop Roll 320 Grit

  • Premium aluminum oxide semi-closed coat product for general purpose use.
  • This general purpose material is flexible enough for edges and continuous and durable enough for hard woods and metals.
  • 50 yards of material are on a spool and encased in cardboard dispenser for easy access in shop environments.
  • Great for: hardwood, non ferrous metals (aluminum, titanium, etc), ferrous metals (stainless, etc), composites, paint and finish.
  • Recommended for dry sanding only | Can Be used on damp materials.
Check Stock

Tacklife Smart

  • Accurate and Quick Stud Finder - The ENGiNDOT stud finder can detect 4 materials include wood, ferrous metals, non-ferrous metals, and AC wires. This....
  • Wire Warning & Metal Detection up to 100MM - Electrical wire detection is up to 2 in.(50mm) depth. No matter what detection mode it is in, AC live....
  • Automatic Calibration & 3 Signal Lights- Saving your effort the stud scanner calibrates automatically without pressing the button manually all the....
  • Works on Wallpaper & Fabric too - The stud finder is not just suitable for drywall. It also scans through the surfaces covered in wallpaper, popcorn....
  • Durable Material and Ergonomic Design - Featured soft rubber buttons to provide a comfortable using experience. This stud finder wall scanner comes....
Check Stock