Reviews Non Standard Bearings

SHIMANO Reel Part Tekota 600 - 4 Smooth Drag Carbontex Drag Washers #SDS1

  • The Tekota trolling reel is a great solution for anglers who troll for both fresh and saltwater species by offering great line capacity.
  • Constructed into a one-piece die-cast aluminum frame that provides tight tolerances and durability and is built to last season after season.
  • Featuring a unique crossbar-forward design that provides direct access to the spool and a non-disengaging level-wind system with underbrace for better....
  • Offers specially treated Anti-Rust Bearings that are at least 10 times more corrosion-resistant than standard stainless steel bearings and promote....
  • Max Drag: 24 lbs. / Gear Ratio: 4.2:1. / Weight: 28.8 oz. / Line Retrieve: 33" / Bearings: 3BB + 1RB – PowerPro Line Cap: 50/735.
Check Stock

YouCopia FridgeView Fridge Turntable, Lazy Susan Organizer for Refrigerator Storage, 11” , White

  • STANDARD FIT: 10.8 diameter fits standard refrigerators, upper cabinets and pantry shelves.
  • ROTATES 360°: Stainless steel ball bearings create a smooth 360° rotation.
  • NON-SLIP: Soft, non-slip feet stay in place and won't damage shelves.
  • BPA-FREE: BPA-free, durable and easy-to-clean storage.
  • QUICK SET-UP: No assembly or installation required, just load and spin.
Check Stock

Jizmo Skateboard Trucks Fits 7.75-8.25 Deck Skateboard Wheels 52mm Skateboard Bearings ABEC-11 Skateboard Tool Skateboard Pads Skateboard Hardware Combo Starter Set

  • Skateboard Trucks and wheels Set for 7.75-8.25" decks. This starter set includes 2 skateboard trucks 139mm standard, 4 skateboard wheels 52mm, High precision ABEC-11 Skateboard bearings, Practical T-tool, 2 riser pads 2mm, and standard skateboard hardware. Build a entry-level skateboard with this set..
  • Durable Standard Skateboard Trucks. Made of Aluminum, durable trucks for cruising or tricks. 5inch hanger, 7.6 inch axle, with 90A hard bushing and 6 base plate holes, fits well in standard double kick concave decks..
  • High Precision ABEC-11 Bearings. These skateboard bearings keep rolling smooth and fast. Good alternative to expensive bearings..
  • All-purpose Skateboard Wheels 52mm. 99A high rebound wheels, suitable for skills or cruising around the street..
  • Universal Skateboard Tool. The T tool can be used to adjust kingpin, wheels, base plate bolts and trucks. A must have tool for skaters..
Check Stock

Jizmo Skateboard Trucks, High Rebound Skateboard Wheels 60mm, Skateboard Bearings ABEC-11, Skateboard Tool, Skateboard Pads, Skateboard Hardware Combo Starter Set（Black…

  • Skateboard Parts Set for Beginners. This starter set includes 2 skateboard trucks, 4 skateboard wheels 52mm, High precision ABEC-11 Skateboard bearings, Practical T-tool, 2 riser pads 2mm, and standard skateboard hardware. Build a entry-level skateboard with this set..
  • Durable Standard 139mm Skateboard Trucks. Made of Aluminum, durable trucks for cruising or tricks. 5inch hanger, 7.75 inch axle, with 90A bushing and 6 base plate holes, fits well in standard 7.5-8.0" double kick concave decks..
  • High Precision ABEC-11 Bearings. These skateboard bearings keep rolling smooth and fast. Good alternative to expensive bearings..
  • High-rebound Skateboard Wheels 60mm. 83A high rebound wheels, smoothier riding experience, suitable for cruising, street skateboarding..
  • Universal Skateboard Tool. The T tool can be used to adjust kingpin, wheels, base plate bolts and trucks. A must have tool for skaters..
Check Stock

Yocaher Skateboards 31 x 7.75 or 8.25 or Cruiser Skateboard w\\/Pro Maple Skate Board Deck ABEC-9 Bearing

  • Standard Skateboard: Your choice of 7.75" x 31" or 8.25" x 32", 7-Ply Maple Deck And SHAPE Trick board - Mellow Concave, Double Kick on nose and tail makes it ideal for any tricks. Good for all-level skateboard skaters..
  • Mini Cruiser Skateboard: 27" x 8" This small deck shape is most popularly known as a campus cruiser. Its small size allows intense carving and total control when utilizing the kicktail for sharp turns..
  • Micro Cruiser Skateboard: 25" x 6.5" The micro cruiser closely resembles the plastic skateboards made in the 70s. The micro size allows different ride types. It can be used for small children, or experienced carvers who are able to weave in and out in a tight pattern..
  • Skateboard Bearings: ABEC-9 Chrome Bearings. The Abec 9 bearings are excellent when it comes to reliably pick up and maintaining speed..
  • Skateboard Griptape: Black Widow Premium Grade 80A Black Griptape. Heavy-duty high impact deck with full length non-slip black grip tape.
Check Stock

Newsfana Aluminum spacers Skates 8-Pack Spacers for 6mm Axles Spacers (Silver)

  • Inline Skate Bearing Spacers Material: Aluminum alloy, galvanized speed ring iron is specially molded into a dragon size.The gaskets are machined from high quality aluminum and meet specific standards. Aluminum Spacers This minimizes resistance to the bearings, and the sturdy aluminum construction eliminates the head and is more durable than other plastics! Skate bearing High quality, guaranteed service life!.
  • Aluminum Spacers This stepped gasket is suitable for conventional: Inline Aluminum Spacer aluminum shaft outer diameter: 7.9 mm inner diameter: 6.3 mm length: 23.5MM Size: 6.3MM X 7.9MM X 23.5MM. The bearing is located in the recessed part of the gasket and is provided with the wheel. Stepped Spacer Seamless integration. ( Package: 8 pack ).
  • Bearing Skate accessories Suitable for all standard size wheels, standard size 8mm bearings and standard size 6mm axles for standard size wheels and bearings. 6mm Axle Aluminum This minimizes resistance to bearings. The robust aluminum construction eliminates head and ratio Other plastics are more durable. Skate Wheel Bearing Installation: Place one bearing in the wheel. Install the gasket into the bearing in the wheel and insert the other bearing into the other side of the wheel..
Check Stock

MAHLE Original 41940.030 Ford 6.0L Power Stroke & Navistar VT275/365 & MaxxForce 5 0.030\ Piston Ring Set, 8 Pack

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Head Gasket Set, Lower Gasket Set, Freeze Plug Set (Brass), Cam Bearings, Timing Chain Kit, Oil Pump.
  • FITS: 87-90 Cadillac, Chevrolet, Pontiac / Brougham, Camaro, Caprice, Firebird 5.7L V8 OHV Naturally Aspirated.
  • FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, Dish Pistons, Master Kit, w/ 3/4 Inlet Pump, w/ 3/4 Inlet, w/o IG3173, w/ Oil Pump & Timing Belt Or Timing Kit If Applica.
  • You are assured to receive a worldwide proven Master Engine Rebuild Kit quality part with OE quality fit and performance..
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock

DNJ EK3144BM Master Engine Rebuild Kit for 2000-2003 / Buick, Pontiac/Bonneville, LeSabre, Park Avenue / 3.8L / OHV / V6 / 12V / 231cid / VIN K

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Head Gasket Set, Lower Gasket Set, Cam Bearings, Timing Chain Kit, Oil Pump.
  • FITS: 00-03 Buick, Pontiac / LeSabre, Park Avenue, Bonneville 3.8L V6 OHV Naturally Aspirated.
  • FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, w/ 2ND DESIGN, Master Kit.
  • You are assured to receive a worldwide proven Master Engine Rebuild Kit quality part with OE quality fit and performance..
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock

DNJ EK3172M Master Engine Rebuild Kit for 2007-2009 / Chevrolet, GMC, Hummer/Canyon, Colorado, Sierra, Silverado, Suburban, Tahoe, Yukon / 4.8L, 5.3L / OHV /16V / L33, LH6, LH8, LH9 / VIN B, VIN C

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Head Gasket Set, Lower Gasket Set, Freeze Plug Set (Brass), Cam Bearings, Timing Chain Kit, Oil Pump.
  • FITS: 07-09 Chevrolet, GMC, Hummer 4.8L-5.3L V8 OHV Naturally Aspirated LMG,LH8,LH6,-,L33.
  • FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, w/ .775 Width Cam Bearings.
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock

DNJ EK1141M Master Engine Rebuild Kit for 1998-2003 / Dodge, Jeep / B1500, B3500, Dakota, Durango, Grand Cherokee/ 5.9L / OHV / V8 / 16V / 360cid / VIN Z

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Head Gasket Set, Lower Gasket Set, Freeze Plug Set (Brass), Cam Bearings, Timing Chain Kit, Oil Pump.
  • FITS: 98-03 Dodge, Jeep 5.9L V8 OHV Naturally Aspirated.
  • FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, Master Kit.
  • You are assured to receive a worldwide proven Master Engine Rebuild Kit quality part with OE quality fit and performance..
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock

DNJ EK213 Engine Rebuild Kit for 1996-2001 / Acura/Integra / 1.8L / DOHC / L4 / 16V / 1834cc / B18B1

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Full Gasket/Sealing Set, Thrust Washer.
  • FITS: 96-01 Acura / Integra 1.8L L4 DOHC Naturally Aspirated B18B1.
  • FITMENT NOTES: w/o Oil Pump & Timing Belt Or Timing Kit.
  • You are assured to receive a worldwide proven Engine Rebuild Kit quality part with OE quality fit and performance..
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock

DNJ EK224 Engine Rebuild Kit for 1998-2001 / Honda/Prelude / 2.2L / DOHC / L4 / 16V / 2156cc / H22A4

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Full Gasket/Sealing Set, Thrust Washer.
  • FITS: 98-01 Honda / Prelude 2.2L L4 DOHC Naturally Aspirated H22A4.
  • FITMENT NOTES: w/o Oil Pump & Timing Belt Or Timing Kit.
  • You are assured to receive a worldwide proven Engine Rebuild Kit quality part with OE quality fit and performance..
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock

Bearing Press / Puller Longboard Skateboard Inline Quad Tool 8mm / 7mm Bearings

  • Durability paired with functionality make this bearing press a can't miss tool. This tool eliminates the struggle of installing and removing bearings....
  • This press can be used with virtually all skateboard wheels and most longboard (maximum size of 70mm x 45mm), inline (maximum size of 82mm x 24mm),....
  • This press comes assembled with an 8mm axle for standard size 608 bearings, and comes with an extra 7mm axle for size 627 bearings.
  • Works as a press/puller for 8mm bearings. For 7mm bearings, ONLY WORKS AS A PRESS. This tool cannot be used as a puller for 7mm bearings.
  • Also includes hardware to table mount if you wish. does not include wheels from the example photo.
Check Stock