Reviews Nmo Trunk Lip Mount

Tram-Browning Inc. CB HAM Low Band Antenna NMO Trunk Mount for Mobile Radio PL259 Cobra Uniden

  • Trunk Lid NMO Mount Fixed Stainless Steel Bracket, Rubber cushion protects surface from scratches..
  • NMO Trunk Lid Mount Connector: UHF Male PL259 Connector.
  • NMO Mount Material made by Chrome-plated Brass + Stainless steel Bracket is for corrosion resistance in harsh weather conditions.
  • NMO Mount Accept Any CB HAM LTE GSM Wifi Mobile Antenna with NMO Connector..
Check Stock

Larsen - 3/4' Hole Mount Antenna with 0-6 GHz Frequency No Connector

  • The mount is a "trunk lid" mount with 13'/about 4m RG-58U cable. This requires a small (typically 3/8" to 3/4" ) hole be drilled through the surface hosting the mount, and is the best choice for an extremely rugged installation..
  • L-Bracket Hole Stainless Steel 3/4" NMO Hole Mount, L Bracket for HYS TCJ-N1 Coax NMO Mount Cable Mobile Antennas Car Truck Hood install. Stainless Steel L-bracket for Trunk Groove Or Side Mounting..
  • Recommended HYS NMO Antenna: NMO Antenna TC-HC152V (136-174Mhz,B077HRNLHZ), TC-HC152U (400-470Mhz, B077HXNJ1F ) or HYS SDN1(144/430Mhz, B07P71M8M5), easy install and match perfectly..
  • Prefect for mobile FM transceiver NMO antennas. NMO to PL259 working for so239/uhf female Motorola Yaesu/Vertex Kenwood HYT Icom radio, the clip need a NMO HF/UHF/VHF/CB Antenna..
  • This is a high quality, low profile base mount that does the job very well. 13 feet NMO cable connected easily with the antenna and there is plenty of cable to reach an antenna mounted practically anywhere on your vehicle/car..
Check Stock

New Tram Browning Black 1246-B Trunk Antenna Mount NMO With PL-259 connector and 17Ft of RG-58 Coax Cable

  • The mount is a "trunk lid" mount with 13'/about 4m RG-58 cable..
  • The flange to the left hooks under the lid of a vehicle trunk..
  • Stainless steel brackets and corrosion resistance hardware.
  • Prefect for mobile FM transceiver NMO antennas. NMO to PL259 working for so239/uhf female Motorola Yaesu/Vertex Kenwood HYT Icom radio, the clip need a NMO HF/UHF/VHF/CB Antenna. Recommended HYS NMO Antenna: NMO Antenna TC-HC152V (136-174Mhz) or TC-HC152U (400-470Mhz), easy install and match perfectly.
  • This is a high quality, low profile base mount that does the job very well. 13 feet NMO cable connected easily with the antenna and there is plenty of cable to reach an antenna mounted practically anywhere on your vehicle/car..
Check Stock

SMA Male Antenna Dual Band 2m/70cm Whip Handheld Radio Antenna Portable Replacement for YAESU/Vertex VX-110 VX-130-132 TYT TH-2R TH-F5 TH-F8

  • 144/430Mhz NMO Antenna Work for Motorola Kenwood Icom Vertex Blackbox HYT Hytera Mobile Radios. NMO to PL259 working for so239/uhf female Dual Band Radio..
  • The mount is a "trunk lid" mount with 13'/about 4m RG-58U cable. This requires a small (typically 3/8" to 3/4" ) hole be drilled through the surface hosting the mount, and is the best choice for an extremely rugged installation..
  • L-Bracket Hole Stainless Steel 3/4" NMO Hole Mount, L Bracket for HYS TCJ-N1 Coax NMO Mount Cable Mobile Antennas Car Truck Hood install. Stainless Steel L-bracket for Trunk Groove Or Side Mounting..
Check Stock

Bingfu Vehicle Mobile Radio Antenna NMO Mount Fix Bracket Lip Mount with UHF PL259 Male Connector 5m 16.5 feet RG58 U Cable for Car Truck Ham Radio Amateur Radio Mobile Radio Antenna

  • NMO CONNECTOR: International standard NMO connector,Suitable for NMO antennas.
  • [4M(13ft) RG58 Coaxial Cable] NMO TO PL-259(UHF male) Plug RG58 Coaxial Cable,Suitable for mobile radio with UHF Female Connector.You can also use....
  • NMO CABLE Requires a small (typically 3/8" to 3/4" ) hole be drilled through the surface hosting the mount, and is the best choice for an extremely....
  • NMO ANTENNA MOUNT Easy to install and match perfectly.
  • NMO TO PL259 CABLE Work for Motorola Yaesu Kenwood Icom Vertex Blackbox HYT Hyte mobile radio..
Check Stock

HYS TCJ-N1 3/8 to 3/4 Hole Mount with NMO Bracket L Shape Fender Mount 13 /About 4m RG-58 Coax Cable NMO to PL259 for All VHF/UHF/CB Radio NMO Antenna

  • The mount is a "trunk lid" mount with 13'/about 4m RG-58U cable. This requires a small (typically 3/8" to 3/4" ) hole be drilled through the surface....
  • L-Bracket Hole Stainless Steel 3/4" NMO Hole Mount, L Bracket for HYS TCJ-N1 Coax NMO Mount Cable Mobile Antennas Car Truck Hood install. Stainless....
  • Recommended HYS NMO Antenna: NMO Antenna TC-HC152V (136-174Mhz,B077HRNLHZ), TC-HC152U (400-470Mhz, B077HXNJ1F ) or HYS SDN1(144/430Mhz, B07P71M8M5),....
  • Prefect for mobile FM transceiver NMO antennas. NMO to PL259 working for so239/uhf female Motorola Yaesu/Vertex Kenwood HYT Icom radio, the clip need....
  • This is a high quality, low profile base mount that does the job very well. 13 feet NMO cable connected easily with the antenna and there is plenty of....
Check Stock

GMRS Mobile Radio Mini Size 20 Watt Long Range GMRS Repeater Capable NOAA Weather Alert Two-Way Radio GS800D

  • 1.｜GS800D｜This GMRS Mobile Radio with 8 repeater channels, 15 high power GMRS channels 10 NOAA weather channels provide clear and crisp communication, compatible with all GMRS and FRS radios. FCC ID: 2AV62KT8900D..
  • 2.｜Long Range｜With External Bracket Lip Mount NMO Antenna: 3.5'' Antenna with NMO Base Mounting (100w) and 16.4 ft PL259 UHF Male cable. It built in clamp that attaches to the trunk or the hood of car..
  • 3.｜Mini Size｜As a compact mobile radio (3.85 (W) x 4.96(D) x 1.69 (H)), it is small enough to mount just about anywhere in any vehicle, suitable for outdoor activities such as mountaineering, hiking, camping and so on..
  • 4.｜Functions & Features｜Dual Band Scanning Receiver can monitor NOAA channels and 160 programmable scanner channels for interesting channels. High (20W)/ Mid (10W) /Low (5W) and Wideband or Narrowband Switchable. CTCSS, DCS, 2Tone, 5Tone, DTMF, Quad Watch, TOT, Remote Stun, Remote Revive, Remote Kill, Patrol/ Monitor Function etc..
  • 5.｜In The Box｜1*GS800D Mobile Radio, 1*Microphone, 1*DC Cable, 1*Mounting Brackets, 1*Screws & Mounting Hardware, 1*Programming Cable, 1*3.5 Inch NMO Antenna, 1*16.4 ft RG58 Coax Cable with Clamp, 1*User’s Manual..
Check Stock

GRA-YG1443 2M/70CM 800W Square Horizontal Directional Loop Base Antenna, 140~150/400~470MHz, SO239 GABIL

  • 144/430Mhz NMO Antenna Work for Motorola Kenwood Icom Vertex Blackbox HYT Hytera Mobile Radios. NMO to PL259 working for so239/uhf female Dual Band Radio..
  • The mount is a “trunk lid” mount with 13’/about 4m RG-58 cable. The flange to the left hooks under the lid of a vehicle trunk. Stainless steel brackets and corrosion resistance hardware..
  • This is a high quality, low profile base mount that does the job very well. 13 feet NMO cable connected easily with the antenna and there is plenty of cable to reach an antenna mounted practically anywhere on your vehicle/car..
Check Stock

HYS Dual Band NMO Antenna, VHF/UHF Pre Tuned Amateur, W/13ft Low-Loss RG58/U Coaxial Cable with UHF-Male(PL259), Stainless Steel L Bracket, Trunk/Hole Mount for Car

  • [High Frequency] The HYS antenna features VHF of 144/430 MHz (136-174MHz and 400-470Mhz) with VSWR:< 1.5, Gain: VHF 2.15/ UHF 3.15 dBi for better TX and RX..
  • [Efficient Performance] The antenna exhibits a maximum input power of 150W that works for all 2 meter 70 centimeters mobile radios..
  • [Durable] The mount is a “trunk lid” mount with 13 ft low-loss RG58U coaxial cable with UHF-male(PL259) connector installed. This is a high quality, low profile base mount that does the job very well..
  • [Easy Installation] The HYS antenna is equipped with 13 ft NMO cable that is connected easily with the antenna and still have plenty cable left to reach the antenna mount practically anywhere on your car or another other vehicle. For a rugged installation, all you require is a small, typically 3/8 inch 3/4 inch, hole to be drilled through the surface that will host the mount..
  • [Package Contents] The HYS package includes L-bracket hole stainless steel for trunk groove or side mounting, 3/4″ NMO hole mount with screws and L-bracket HYS TCJ-N1 coax NMO mount cable, mobile antennas perfect for car and truck’s hood..
Check Stock

Midland Universal Hood and Trunk Lip Mount with NMO Connector, and 6M Cable - Works with Midland MicroMobile MXT105, MXT115, MXT275, MXT400

  • NMO CONNECTOR: International standard NMO connector,Suitable for NMO antennas.
  • [4M(13ft) RG58 Coaxial Cable] PL-259 Plug RG58 Coaxial Cable,Suitable for mobile radio with UHF Female Connector.You can also use adapters to make it work on your other radios.
  • Stainless steel brackets and corrosion resistance hardware.
  • Work for Motorola Yaesu Kenwood Icom Vertex Blackbox HYT Hyte mobile radio..
Check Stock

Browning BR-1024-UHF Adjustable NMO Trunk Mount BR-1024-UHFE

  • Frequency Range: VHF 136-174MHz, UHF 400-470MHz.
  • Antenna Interface Connector: UHF PL259 Male 50 Ohm Connector.
  • Antenna Mounting Connector: NMO Mount Connector.
  • Cable Connector: UHF PL259 Male 50 Ohm....
  • Compatible with Amateur Mobile Radio, Ham Radio, FRS GMRS Two Way Radio: BTECH, ICOM, Kenwood, Midland, Yaesu, TYT, AnyTone, Radioddity, Cobra,....
  • Package List: 1 x Antenna, 1 x Cable, 1 x Lip Mount Bracket(including Hexagon Wrench) (As the Picture Shown).
Check Stock

Fumei NMO to PL259 Adapter NMO Mount Assembly with NMO and SO-239 UHF Female Connector

  • This Adapter is assembled by three parts, the UHF female connector(SO-239 to SO-239), the NMO nut on UHF connector, the NMO PIN in UHF connector.
  • You can assemble NMO mount for NMO type antenna with this adapter.
  • Easy way to convert UHF mount type to NMO mount type.
  • Screw length of UHF female connector(SO-239 to SO-239) is 45mm.
Check Stock

TRAM TRAM1295 NMO to 3/8' x 24 Adapter

  • Adapts any NMO mount to .38" x 24 thread mounting.
Check Stock