Nitrous Express - Dry EFI Single Nozzle Nitrous Kit (35-150HP) w/10lb Bottle (21000-10)
- This system provides nitrous through a single Dry Nozzle..
- This system does not add fuel and is intended to be used with an engine management system that can add nitrous enrichment fuel through the engines injectors..
- Includes nitrous jets for 35-50-75-100-125 &150 HP..
- This NX Dry nitrous system comes complete with a 1/8npt dry nozzle, a single .093 Lightning solenoid..
- Systems with a bottle include the billet Lightning bottle valve, wide open throttle switch..
Check StockNOS MINI 2-STAGE PROGRESSIVE NITROUS CONTROLLER WITH TOUCH SCREEN PROGRAMMER,0-9.9 SECONDS PROGRESSIVE TIME
- ...ni 2-Stage Progressive Nitrous Controller | New Hand Held Color LCD 2.4" Touch Screen Display with Micro SD Memory Card to Store Tunes & Software Updates | Touch screen Stylus included | 2 Fully Independent Stage Outputs - Allows Programming in Any Curve Shape or With Built-in Ramp Builder Application | Progressive Solenoid Operation Based on Time, RPM &/or TPS (Throttle Position Sensor) Input & Can Shut Nitrous Off at a Programmed RPM Ceiling.
- Specs: Brand: NOS | Emission Code: 4 | Final Percentage: 0 - 100% | Product Type: Nitrous Controller | Progressive Time: 0 - 9.9 Seconds | Setting: Touch Screen | Stages: 2.
Check StockNOS 4An Purge Valve Kit - Black
- Releases a large white cloud for impressive nitrous display and improved system performance.
- Includes solenoid, filter, activation push button, fittings, wiring, and instructions.
Check StockEdelbrock 71900 Progressive Nitrous Controller
- Controls amount of nitrous flow to solenoid.
Check StockNOS 25974NOS Mini 2-Stage Progressive Controller
- Mini 2-Stage Progressive Nitrous Controller.
- Hand Held Color LCD 2. 4” Touch Screen Display w/ Micro SD Memory Card to Store Tunes and Software Updates.
- 2 Fully Independent Stage Outputs – Allows Programming in Any Curve Shape or With Built-in Ramp Builder Application.
- Progressive Solenoid Operation Based on Time, RPM, and/or TPS (Throttle Position Sensor) Input.
Check StockS&S Cycle 550-0501 HI-4N Ignition Module
- Fits almost all years Chinese made electric start upright engine 49cc 50cc 70cc 80cc 90cc 100cc 110cc 125cc engines. For ATV, Coolster, Quad Bike, Dirt Bike, Pit Bike, Go Kart, Kawasaki KLX, 4 Wheelers, Scooter, Buggy, Motowork, Dune, Taotao..
- 12 Volt Coil+5 PIN CDI BOX+4 PIN Regulator+Solenoid Relay+Spark plug.Fits ATV / Quad / Kawasaki KLX / Coolster / Scooter / 4 wheelers / Buggy / Dirt Bike / Go Kart /Pit Bike/ Motowork more..
- This kit include 2-pin Male Plug Relay,Ignition Coil 135 Degree Elbow,12v 4-pin Voltage Regulator,5-pin CDI. (Does Not fit for GY6 engine)..
- The kit Compatible with many brands,such as: Atomik, Pitpro, Hummer, Orion, Xmoto, Lei, DMX, SWD, TDR, DDR, Tommahawk, Monsoon, Grudge, Kazuma, Bull, Trooper, Hunter, Motox, Trojan, Blitz, Crusade, Link, Bigfoot, Kuda, Motoworks, Nitrous, Reign, Fury, Prox, Raider, Zongshen, Loncin, Ducar, Lifan, Thumpster, Thumbstar, Chongqing..
- The items are the same as the pictures.5 Pins CDI module + 2Wire Ignition Coil + Starter Relay Solenoid + 4 PIN Voltage Regulator Rectifier + Spark Plug. Fits for: 50cc 70cc 90cc 110cc 125cc 140cc horizontal engine,Bikes & Quads,ATV, Buggy's..
Check StockEZ Wiring -12 Standard Wiring Harness
- For 50cc 70cc 110cc 125cc Kazuma Taotao Kangdi 4 Wheeler Chinese ATV Quad.
- Package include: 1x Wiring Loom Harness,1x Ignition Switch,1x Key switch,1x 5 Pin AC CDI Box,1x Rectifier,1x Solenoid Relay,1x Coil with lead,1x Stator ,1x Spark Plug.
- Quad wire harness can fit for almost all years Chinese made electric start upright engine 50cc 70cc 90cc 110cc 125cc engines.Fit for Taotao,Coolster,ATV, Quad Bike, Dirt Bike, Pit Bike, Go Kart,4 Wheelers,Scooter,Buggy, Motowork, Dune..
- Compatible with many brands,such as: Atomik, Pitpro, Hummer, Orion, Xmoto, Lei, DMX, SWD, TDR, DDR, Tommahawk, Monsoon, Grudge, Kazuma, Bull, Trooper, Hunter, Motox, Trojan, Blitz, Crusade, Link, Bigfoot, Kuda, Motoworks, Nitrous, Reign, Fury, Prox, Raider, Zongshen, Loncin, Ducar, Lifan, Thumpster, Thumbstar.
- Please Check The Plug of Wire harness Before You Buy It.
Check StockNitrous Express - SX2D Dual Stage Diesel Nitrous Kit w/Progressive Controller (NXD4000)
- The Nitrous Express dual stage Diesel nitrous system isn’t just another plug-in chip that floods your engine with raw diesel and covers the car behind you in black smoke..
- The Nitrous Express systems are engineered to be the safest way to boost horsepower on any diesel engine..
- Nitrous Express Diesel systems actually cool the exhaust temperatures while boosting horsepower and torque! ..
- The Maximizer nitrous controller allows you to apply nitrous flow through either boost pressure, RPM, Time, MPH (Miles Per Hour), or Throttle percentage progression..
- Infinitely adjustable power levels make the Nitrous Express system the most advanced, safest diesel power booster on the planet..
Check StockInnovate Motorsports 3893 PSN-1 PowerSafe Nitrous Bottle Pressure/Wideband Oxygen Gauge Kit
- All-in-one, Nitrous safety override and wideband air/fuel ratio gauge w/RPM window switch, 52mm (2 1/6") diameter gauge body.
- OLED user configurable display. Nitrous Bottle Press., shift light, Air/Fuel ratio. AFR or Lambda, inHg, PSI, kPa, or BAR.
- User programmable nitrous safety cut using Air/Fuel ratio and bottle pressure references. Nitrous cut by lean air/fuel condition. Nitrous cut by minimum bottle pressure.
- User programmable RPM window switch range, 10 RPM increments.
Check StockNEW NOS SNIPER WET NITROUS PLATE KIT,150-250 ADJUSTABLE HORSEPOWER,10 LB ORANGE BOTTLE,COMPATIBLE WITH 4 BARREL HOLLEY 4150 SQUARE FLANGE),4500 DOMINATOR,SPREAD BORE QUADRA JET & CARTER AFB
- Brand New NOS Sniper Wet Nitrous Plate Kit, 150-250 Adjustable Horsepower, 10 lb Orange Bottle, Compatible with 4 Barrel Holley 4150 Square Bore & Carter AFB (Holley Part #07002NOS).
- NOS have built on the very popular, budget friendly, Sniper nitrous kits for those who need a little more power from their engines. The new Sniper 250 kits step up the power potential to an additional 250 horsepower, in a low cost single nitrous plate kit, for the popular carburetors, Holley 4150 (Square Flange) Part #07002NOS, 4500 (Dominator) Part #07003NOS & Spread Bore (Quadra jet) Part #07007NOS..
- These single stage wet kits have everything needed to add some extra power to your engine. Includes a 10 lb. Sniper orange nitrous bottle, 14 ft. -4AN feed line, stainless bar nitrous plate & the new, large body, Sniper Solenoids. Also included is all the hardware required as well as nitrous & fuel jetting for power levels of 150, 175, 200 & 250 HP..
- Features: Budget Friendly | Easy to install | All installation hardware included | Up to 250 additional horsepower | Large Nitrous & Fuel Solenoids | Included jetting for 150, 175, 200 & 250 HP | 14' long -4 AN Hose Length.
- NOTE: It is important to follow the install instructions & to insure the fuel system has the capacity to sup....
Check StockNitrous Express - Mainline EFI Single Nozzle Nitrous Kit w/10lb Bottle (ML2000)
- If you are a serious nitrous junkie on a tight budget we have what you have been waiting for! NX introduces MainLine Nitrous Systems..
- MainLine Systems benefit from the years of research and development that made Nitrous Express the leader in the nitrous world, but at a price even the most budget-restricted racer can afford..
- Just the basics, no frills, just rock solid performance at rock bottom prices..
- Includes: 10lb Nitrous Bottle with Standard Brass Valve..
Check StockBlack Pumas [Cream LP]
- 8 Gram Highest Quality European Nitrous Oxide Whipped Cream Chargers.
- Each carton contains 10 Ultra Purewhip Nitrous Oxide Cartridges- 8 grams of pure nitrous oxide per cartridge.
- Compatible: All Standard 8 gram Nitrous Oxide Whip Cream Makers including iSi, Kayser, Mosa, Liss.
- Produced in Europe’s most modern facility by Austrian based company with decades of experience in this technology.
- Master Case for commercial applications user- minimum shelf life of 10 years.
Check StockComplete Electrics Wiring Harness Wire Loom Kit for GY6 4 Stroke Engine 125cc 150cc Pit Bike Scooter ATV Quad Go Kart
- This wiring harness kit is designed for 4 stroke QUAD / ATV parts replacement repair work..
- Compatible with many brands,such as: Atomik, Pitpro, Hummer, Orion, Xmoto, Lei, DMX, SWD, TDR, DDR, Tommahawk, Monsoon, Grudge, Kazuma, Bull, Trooper, Hunter, Motox, Trojan, Blitz, Crusade, Link, Bigfoot, Kuda, Motoworks, Nitrous, Reign, Fury, Prox, Raider, Zongshen, Loncin, Ducar, Lifan, Thumpster, Thumbstar, Chongqing..
- This is a complete electric start engine wiring harness loom,include 1x ATV Wire harness,1x CDI(5Pin AC),1x Solenoid Relay,1xRectifier (Voltage Regulator) ,1x Ignition Switch (2 keys),1x Upgraded Multi-functional ATV Switch,1 x ATV stator 6 coil,1x Ignition Coil with lead, 1x Spark plug.
- DO NOT FIT :GY6 motorbikes and other 200cc - 250cc Zongshen Lifan ATV / QUAD with different stator or CDI. So please compare your old stator, CDI with the ones in the listed pictures, just to be sure that they are the same before order..
- Professional installation is highly recommended and false assembly may cause fire on the harness..
Check Stock