Reviews Nipple Mating Hose Fitting

boost/vacuum gauge silicone coupler adapter - Car Turbocharger Pipe Fitting Universal Turbocharger Silicone Boost Pipe Hose Nipple Turbo Vacuum VAC Gauge Fitting TDI

  • Wide Application---The turbocharger pipe fitting is suitable for a 4mm inner diameter pipe. 100% brand new aftermarket Boost Pipe Fitting that has never been used.
  • For Boost Gauge---This boost hose nipple fitting allows you to fit a boost gauge or any other type of instrument where vacuum or boost pressure is required.
  • Superior Quality Aluminum Alloy---The turbo boost pipe hose nipple is made of high quality aluminum alloy and durable to use. The manufacture of the fitting meets the strict quality requirements.
  • Easy Installation---The turbocharger mounting kit is easy to install, simply drill a 8mm hole in your silicone boost pipe and push the nipple through the hole (from the inside), put on the sealing o-ring, washer and tighten down with the nut.
  • Quality Assurance---As a professional seller, we provide high quality products and considerate services. Every product must go through strict inspection to ensure reliable quality. Please rest assured to buy our products, hope you have a pleasant shopping experience.
Check Stock

SpringSpray 1-1/2\ NPT Male x 1-1/2\ NST (NH) Male Brass Hexagonal Nipple Fitting Fire Equipment Hex Nipple Doule Male Fire Hose Adapter

  • ⚒【PREMIUM MATERIAL】- Made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The Fire Equipment Hexagonal Nipple Fitting offer long-term service.
  • ⚒【CONNECTION SIZE】- Hex nipple fitting 1-1/2" NH/NST to 1-1/2" NPT double male fire hose adapter. Male 1-1/2 inch NH / NST will only connect to a female 1 1/2 inch NH / NST.
  • Male 1-1/2 inch NPT will only connect to a female 1-1/2 inch NPT/NPSH.
  • ⚒【UNIQUE DESIGN】- With hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench. Hex tube fitting as a short length of pipe with threaded ends for connecting threaded pipes.
  • ⚒【WIDE APPLICATION】- Male to male adapters are used to bridge two female hose, pipe or valve fittings. Suitable for use in general firefighting applications. Brass fire hydrant adapter fittings are used for connecting fire hose, PVC pipe, and other low-pressure pipes in the fire brigade, industry, refinery, building industry, agriculture, shipping, military, and civil protection.
  • ⚒【100% SATISFACTION SERVICE】-We have a professional product development team. If you have any questions about compatibility or any dissatisfaction, please feel free to contact us and we will help you ....
Check Stock

Stainless Steel 316 SS316 Sanitary Fitting Diameter 51MM 2 Weld Pipe with 64MM Ferrule Flange fits 2 Tri Clamp

  • Stainless steel 316 for resistance to corrosion and high temperatures.
  • Maximum operating pressure rating of 250 psi at 70 degrees F ambient temperature.
  • Ferrule fitting for providing a seal when compressed between two mating components.
  • Attaches to a fitting to help provide a leak-resistant seal on a tube or hose.
  • This long weld clamp ferrule sanitary fitting is suitable for use in food, beverage, and dairy applications.
Check Stock

NEW MSD HIGH PRESSURE ELECTRIC FUEL PUMP,45 GPH AT 60 PSI.375" HOSE NIPPLE INLET & OUTLET

  • Brand New MSD High Pressure Electric Fuel Pump, 45 GPH at 60 PSI, .375" Hose Nipple Inlet & Outlet (Part #2225)..
  • This high pressure and high flow Fuel Pump features a roller vane pump mechanism which is extremely resistant to clogging & jamming. The pump mounts in-line (out of the fuel tank) with two supplied cushioned clamps for a quick and sturdy installation. The wire terminals feature brass studs for secure connections. Ideal for use as a "booster" for nitrous oxide applications, or as a stand alone pump for multi-port EFI systems on engines up to approximately 525 HP. Capable of 45 GPH at 60 PSI..
  • NOTE: Compatible for Lеаded and Unlеаded Fuel Only.
  • Features: 45 GPH at 60 PSI | 3/8" Hose nipple inlet & outlet.
  • Specs: Brand: MSD | Current Draw: 12 Amps at 14 Volts | [email protected]: 45 | Inlet & Outlet Size: 3/8 in. Nipple Fitting | Product Type: Fuel Pump.
Check Stock

Dixon STC2025 Carbon Steel Hose Fitting Jump Size King Combination Nipple 2 NPT Male x 1-1/2 Hose ID Barbed

  • King combination nipple for connecting two hoses of different diameters in a straight run.
  • Connects to a hose on one end and an NPT female connector on the other.
  • Plated steel for greater corrosion resistance than unplated steel.
  • Barbed fitting for a tight seal on hoses.
  • King combination nipple for low-pressure discharge or suction service.
Check Stock

6-20mm T Bolt Clamp 304 Stainless Steel Pipe Clamp Heavy Duty Hose Clamp (Pack of 10)(11-13Mm)

  • Size: 6-20mm. Quantity:10. There are 8 kinds of hose clamps in different adjustable diameters that you can choose..
  • Function: T bolt clamp is a device used to attach and seal a hose onto a fitting such as a barb or pipe nipple. Fit for thin wall hose in small sizes such as air hose, water pipe, fuel hose, silicone hose, etc..
  • Material: Made of 304 stainless steel, which ensures that it has good durability, not easy to age, anti acid and alkali, high hardness and not easy to deform..
  • Easy to Use: Convenient to install or remove by using either a slot screwdriver or a hex wrench. The clamp is put around the hose or tube to be connected, with the loose end being fed into a narrow space between the band and the captive screw. When the screw is turned, it pulls the threads of the band, causing the band to tighten around the hose..
  • Wonderful Accessory: Superior workmanship bringing a good user experience. Please check the pictures carefully before buying to avoid wrong purchase..
Check Stock

6-20mm T Bolt Clamp 304 Stainless Steel Pipe Clamp Heavy Duty Hose Clamp Pack of 10 14-16Mm

  • Size: 6-20mm. Quantity:10. There are 8 kinds of hose clamps in different adjustable diameters that you can choose..
  • Function: T bolt clamp is a device used to attach and seal a hose onto a fitting such as a barb or pipe nipple. Fit for thin wall hose in small sizes such as air hose, water pipe, fuel hose, silicone hose, etc..
  • Material: Made of 304 stainless steel, which ensures that it has good durability, not easy to age, anti acid and alkali, high hardness and not easy to deform..
  • Easy to Use: Convenient to install or remove by using either a slot screwdriver or a hex wrench. The clamp is put around the hose or tube to be connected, with the loose end being fed into a narrow space between the band and the captive screw. When the screw is turned, it pulls the threads of the band, causing the band to tighten around the hose..
  • Wonderful Accessory: Superior workmanship bringing a good user experience. Please check the pictures carefully before buying to avoid wrong purchase..
Check Stock

Kegco Keg Tap Coupler, 1

  • The Kegco KT85-MFL Lever Handle D System Keg Tap is the perfect coupler for anyone who wants to easily switch back and forth from domestic to home brew kegs.
  • This keg tap has a nickel-plated forged brass body and features a stainless steel probe and a black lever handle.
  • Coupler comes equipped with 1/4" MFL fittings for both the gas in and liquid out posts, so you no longer have to worry about pulling a hose off of a hose nipple or removing clamps if you want to use a different kind of coupler.
  • This D system keg coupler is easy to use - simply unscrew the nut from the fitting and screw it onto comparable ball lock or pin lock couplers.
  • Please Note: Beer Line requires a 1/4" Swivel Nut Set and Air Line requires a 3/8" Swivel Nut Set.
Check Stock

Dixon AST25 Aluminum Hose Fitting King Combination Nipple Threaded End with No Knurl 2 NPT Male x 2 Hose ID Barbed

  • King combination nipple for low-pressure discharge or suction service.
  • Connects to a hose on one end and an NPT female connector on the other.
  • Aluminum for lighter weight and resistance to corrosion and tarnishing.
  • Barbed fitting for a tight seal on hoses.
Check Stock

Msd High Pressure Electric Fuel Pump, 43 Gph

  • Great for fuel management systems and nitrous booster.
Check Stock

MSD Ignition 29259 Fuel Pump

  • Great for fuel management systems and nitrous booster.
Check Stock

MSD Ignition 2921 Atomic EFI Fuel Pump Kit

  • Great for fuel management systems and nitrous booster.
Check Stock

Fumoto F106N FN-Series Drain Valve with Long Nipple with Lever Clip

  • F-Series Fumoto Valve With Long Nipple And Lc-10 Lever Clip For M14 - 1. 5.
  • Allows For Clean And Mess Free Oil Changes. Nipple diameter-3/8 inch, Nipple length-1/2 inch.
  • One Touch Operation. Sealing Type: Fiber Gasket.
  • Standard Length Nipple For Easy Hose Attachment.
Check Stock