Reviews Nipple Fittings For High Pressure Systems

Mr. Gasket - 9710 Fuel Press Regultr W/Hdwr, Chrome

  • Fits 5/16 inch and 3/8 inch inside diameter fuel line.
  • Not for fuel injected systems, Max inlet pressure 9 PSI.
  • Adjusts fuel pressure from 1 to 6 pounds.
Check Stock

ABN Fuel Injection Pressure Test Kit – Comprehensive Universal Set with Improved Flex Hoses, Fittings, and Instructions

  • ...nd pressure release valve fitting with long drain hose to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel.
  • Fuel injection pressure gauge displays reading 0-100 PSI and 0 to 7 Bar.
  • FITS YOUR VEHICLE: Automotive fuel pressure test kit adapters fuel gauge kit has all necessary fittings to attach to a pressurized system.
  • Will work on any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection.
  • Recommended for older low-pressure systems with mechanical fuel pumps.
  • Not compatible with Bosch, CIS-Jetronic, or GM throttle body systems.
  • EASY STORAGE: Heavy-duty 2.3” x 12.8” x 11” inch (5.8cm x 32.5cm x 27.9cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization of each component of this fuel injection pressure kit.
  • PACKAGE CONTENTS: Fuel tester kit gas pressure test gauge package is a comprehensive kit of adapters and fittings.
  • Comes with flex hoses, fittings, and instructions for quick reference.
  • Includes Brass 1/8"-27 NPTx1/4"-18NPT, Brass 1/4" Barbed x 1/4"-18NPT, Aluminum 1/4" & 3/8 Barbed x 1/8-24NPT, 3 Rubber Hoses 1/4" x 2.5" L, 3/8" x 3.0" L.
Check Stock

Everflow Supplies PCBL3460 60\ Long Pre-Cut Black Steel Pipe with 3/4\ Nominal Size Diameter

  • PVC SCHEDULE 80: Pipe and Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • MADE IN THE USA: For over a century, Ventral has been fabricating pipe and fittings, employing more than loyal, hard-working Americans. All of our products are proudly made and/or designed in the USA..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 80 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • VENTRAL PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools and spas, outdoor applications and cold water supply lines.
Check Stock

Rustic State Industrial Plumbing Gooseneck Connector Iron Pipe Rust Free 3/4 Inch for DIY Projects Black Set of 10

  • PVC SCHEDULE 80: Pipe and Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • MADE IN THE USA: For over a century, Ventral has been fabricating pipe and fittings, employing more than loyal, hard-working Americans. All of our products are proudly made and/or designed in the USA..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 80 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • VENTRAL PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools and spas, outdoor applications and cold water supply lines.
Check Stock

ANRIWT Air Brake Line Fittings,1/4" DOT Air Fittings Brass Push in Fitting, Push to Connect Union Fittings, Air Brake Union 1/4" Tube OD for Trucks Trailers Use and Industria Workshops (4 PCS)

  • 【PREMIUM MATERIAL】：Our air brake fittings are made of high quality CA360 brass,Meets D.O.T FMVSS 571.106 ,SAE J1131 Air Brake system Requirements and Air Brake system Requirements,with corrosion resistance, high temperature ductility and low permeability. Great for long time use, dot air brake fitting pneumatic fittings type: 1/4" ..
  • 【EASY TO USE】: Union connect two tube with same OD. All dot air quick connect fittings can be sealed by pushing the tube firmly into the fittings and they are also simple to be removed from the tube..
  • 【TYPICAL APPLICATION】：Air brake fittings assortment kit can be used with air systems, copper tubing in air lines brake systems, which is perfect for automotive car or truck repair,air operated seats, operating gauges, air horns, industrial workshops, air brake connections,towing machine hose connection and air brake connections or lawn mower repair..
  • 【PRESSURE RANGE】: Air brake fittings working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer’s recommendations for pressure and temperature mut....
Check Stock

CHARLOTTE PIPE 2 SCH 40 COUPLING SXS PRESSURE ( 1 Unit Piece )

  • White fittings that are used in potable water applications only.
  • For use where systems will not exceed 140° F.
  • PVC Schedule 40 Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines.
  • MADE IN THE USA: For over a century, Charlotte Pipe has been manufacturing pipe and fittings, employing more than 1,400 loyal, hard-working Americans. All of our products are proudly made in the USA..
Check Stock

Charlotte Pipe 3' Cap Bushing Pipe Fitting - Socket Schedule 40 White PVC Highly Durable, Easy to Install, High Tensile and Sound Deadening for Home or Industrial Use (Single Unit)

  • PVC SCHEDULE 40: Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 40 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • CHARLOTTE PIPE PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines.
  • MADE IN THE USA: For over a century, Charlotte Pipe has been manufacturing pipe and fittings, employing more than 1,400 loyal, hard-working Americans. All of our products are proudly made in the USA..
Check Stock

HaSaoMoi Air Brake Line Fitting, DOT Brass Push in Fitting, Push to Connect Union Fittings Air Brake Union 1/4" Tube OD for Trucks Trailers andIndustrial Use (4 Pack)

  • 【PREMIUM MATERIAL】：Our push in fittings are made of high quality CA360 brass,Certified by DOT and Air Brake system Requirements,with corrosion resistance, high temperature ductility and low permeability. Great for long time use, dot air brake fitting pneumatic fittings type: 1/4".
  • 【TYPICAL APPLICATION】：The air brake fittings assortment kit can be used with air systems, copper tubing in air lines brake systems, which is perfect for automotive car or truck repair,air operated seats, operating gauges, air horns, heater controls, industrial workshops, daily garden or lawn mower repair, towing machine hose connection and air brake connections ..
  • 【EASY TO BE INSTALLED】: Union connect two tube with same OD. All quick connect fittings can be sealed by pushing the tube firmly into the fittings and they are also simple to be removed from the tube..
  • 【MAX PRESSURE】: Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer’s recommendations for pressure and temperature mutations).
Check Stock

Pipe Décor 1½ in. x 6 in. Black Steel Pipe, Pre-Cut, Industrial Steel Grey Fits Standard 1½ Inch Black Threaded Pipes, Nipples and Fittings, 6 Pack

  • PVC SCHEDULE 80: Pipe and Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • MADE IN THE USA: For over a century, Ventral has been fabricating pipe and fittings, employing more than loyal, hard-working Americans. All of our products are proudly made and/or designed in the USA..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 80 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • VENTRAL PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools and spas, outdoor applications and cold water supply lines.
Check Stock

Msd High Pressure Electric Fuel Pump, 43 Gph

  • Great for fuel management systems and nitrous booster.
Check Stock

MSD Ignition 29259 Fuel Pump

  • Great for fuel management systems and nitrous booster.
Check Stock

MSD Ignition 2921 Atomic EFI Fuel Pump Kit

  • Great for fuel management systems and nitrous booster.
Check Stock

NEW MSD HIGH PRESSURE ELECTRIC FUEL PUMP,45 GPH AT 60 PSI.375" HOSE NIPPLE INLET & OUTLET

  • Brand New MSD High Pressure Electric Fuel Pump, 45 GPH at 60 PSI, .375" Hose Nipple Inlet & Outlet (Part #2225)..
  • This high pressure and high flow Fuel Pump features a roller vane pump mechanism which is extremely resistant to clogging & jamming. The pump mounts in-line (out of the fuel tank) with two supplied cushioned clamps for a quick and sturdy installation. The wire terminals feature brass studs for secure connections. Ideal for use as a "booster" for nitrous oxide applications, or as a stand alone pump for multi-port EFI systems on engines up to approximately 525 HP. Capable of 45 GPH at 60 PSI..
  • NOTE: Compatible for Lеаded and Unlеаded Fuel Only.
  • Features: 45 GPH at 60 PSI | 3/8" Hose nipple inlet & outlet.
  • Specs: Brand: MSD | Current Draw: 12 Amps at 14 Volts | [email protected]: 45 | Inlet & Outlet Size: 3/8 in. Nipple Fitting | Product Type: Fuel Pump.
Check Stock