Reviews Nextion Display 8

NEXTION 7 inch Enhanced NX8048K070-011C HMI Touch Screen LCD Display Pannel 800x480 with Enclosure Case for Arduino Raspberry Pi (Capacitive)

  • Nextion is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or device, it is the best solution to replace traditional LCD and LED. Replace the Nixie tube. It is mainly used in the Internet of Things (IoT) or consumer electronics..
  • Nextion consists of a hardware part (a series of TFT cards) and a software part (the Nextion editor). The Nextion TFT board uses only one serial port for communication. Save users the hassle of wiring. It is easy to adapt the Nextion family HMI to existing projects. Users just need to provide it with a UART..
  • You can power Nextion 3.5 from the 5V pin on the microcontroller, but this is not recommended. Working with insufficient power can damage the screen, so please use the power board that comes with nextion. See the image for use..
  • NX4832T035 is a powerful 3.5 inch HMI. Features include: 3.5 inch 480 x 320 TFT resistive touchscreen display, 16MB Flash, 2KB RAM, 65,000 colors. Viewing area: 73.44mm (L) × 48.96mm (W).
  • Uploading a TFT file via an SD card is faster than a 4-pin serial connection, but the credit card is in FAT32 format and does not exceed 32GB..
Check Stock

DIYmalls 3.0 inch TFT LCD Display Module 3.3V Resistive Touch Screen 400x240 for Arduino UNO R3

  • Nextion Enhanced NX8048K070_011C is a powerful 7.0'' HMI TFT capacitive touch display with a beautiful enlcosure, with 32MB Flash data storage space, 1024 byte EEPROM, 8192 byte RAM, and GPIO supported..
  • Nextion 7 enhanced supports built-in RTC, GPIO, max 32G Micro TF/SD card (FAT32 file format).
  • Micro USB 5V 2A power supply recommended..
  • You need a USB to TTL adapter to plug nextion display into USB port..
  • -If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
Check Stock

Nextion 7 inch Enhanced NX8048K070-011R HMI Touch Screen LCD Display Pannel 800x480 with Enclosure Case for Arduino Raspberry Pi Resistive

  • Nextion Enhanced NX8048K070_011R is a powerful 7.0'' HMI TFT resistive touch display with a beautiful enclosure, with 32MB Flash data storage space,....
  • Nextion 7 enhanced supports built-in RTC, GPIO, max 32G Micro TF/SD card (FAT32 file format).
  • Micro USB 5V 2A power supply recommended.
  • You need a USB to TTL adapter to plug nextion display into USB port..
  • -If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock

Nextion Intelligent 7.0 inch NX8048P070-011C Capacitive Touch Screen TFT HMI LCD Display 800x480 Support Audio Video (Capacitive Touch)

  • Compared with Nextion Basic & Nextion Enhanced, Nextion Intelligent display has more powerful hardware in terms of MCU, Flash storage and SRAM. Audio, video and animation play functions enrich your project HMI interaction..
  • You can power NX8048P070-011C from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power board came with nextion. See image on how to use it..
  • Uploading TFT file via sd card is faster than 4pin serial port, but pls check card is FAT32 format and no more than 32GB..
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
Check Stock

Nextion Display 3.5 NX4832T035 Resistive Touch Screen UART HMI LCD Module 480 x 320 + Acrylic Case Enclosure Transparent for Arduino Raspberry Pi

  • NX4832T035 is nextion 3.5 basic screen: 3.5 inch TFT, 480x320 resistive touch display, 16M flash, 2K Byte RAM, 65k colors..
  • You can power nextion 3.5 from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power....
  • You need a USB to TTL adapter to plug nextion display into USB port..
  • Uploading TFT file via sd card is faster than 4pin serial port, but pls check card is FAT32 format and no more than 32GB..
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock

Nextion Display 3.2 inch NX4024T032 Resistive Touch Screen UART HMI TFT LCD Module 400x240 + Transparent Acrylic Case Enclosure for Arduino Raspberry Pi

  • NX4024T032 is nextion 3.2 basic screen: 3.2 inch TFT, 400x240 resistive touch display, 4M flash, 2K Byte RAM, 65k colors..
  • You can power nextion 3.2 from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power....
  • You need a USB to TTL adapter to plug nextion display into USB port..
  • Uploading TFT file via sd card is faster than 4pin serial port, but pls check card is FAT32 format and no more than 32GB..
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock

C4Labs DRPi-1NSX case for Raspberry Pi 3 B+, Duplex MMDVM v1.0, 2.4″ Enhanced Nextion Screen (Included) ~ (Black Ice)

  • Full body coverage for Raspberry Pi 3B (not included), Duplex MMDVM v1.0 dual antenna (not included), and 2.4" Nextion Touchscreen(included). Case kit requires assembly. Case is not waterproof..
  • Includes a 2.4″ Enhanced Nextion Touchscreen**Please note that connecting the Nextion screen to your set-up may require additional soldering of pins or wires not covered in these case instructions..
  • The new inner layers have been designed to fit the Pimoroni Fan SHIM (not included).
  • For Raspberry Pi 3B+, 3B, 2B, and B+ (not included), Duplex MMDVM v1.0 (not included), and a 2.4″ Enhanced Nextion Touchscreen (included).
  • Designed and Crafted by Local Artists at our workshop in Tacoma, WA USA.
Check Stock

DIYmalls Acrylic Case Enclosure Black for Nextion Enhanced 3.5 Display NX4832K035 Resistive Touch Screen (3.5 inch)

  • This acrylic case only works with Nextion enhanced 3.5' NX4832K035, not for Nextion 3.5 Basic NX4832T035..
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
Check Stock

CP2102 6 in 1 USB to TTL Serial Adapter Module USB to TTL 485 232,TTL to 232 485,RS232 to 485 + 4P Dupont Cable Jumper Wire Female to Female for Nextion Display Beitian GPS Arduino Windows

  • -cp2102 serial adapter module supports usb to ttl, usb to rs232, usb to rs485, ttl to 232, ttl to 485, 232 to 485..
  • -USB specification 2.0 not 3.0, compatible with arduino,Windows XP/7/8/10 32bits/ 64bits, Linux etc..
  • -You need to set the dip switches for different conversion purpose..
  • -Before make 6 in 1 usb to ttl module work, you need to install cp2102 driver..
  • -cp2102 usb to ttl adapter widely used with nextion display, beitian gps, esp-01s adapter, sim7000a board etc..
Check Stock

Nextion Enhanced 4.3 inch Display NX4827K043 HMI Resistive Touch Screen LCD Module 480x272 + Acrylic Case Enclosure for Arduino Raspberry Pi

  • Compared to NX4827T043, NX4827K043 add new functions: support built-in RTC, save data to Flash, GPIO, larger flash capacity and faster CPU..
  • You can power NX4827K043 from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power board....
  • You need a USB to TTL adapter to plug nextion display into USB port..
  • The Battery (NOT included) is NOT used to supply power for display. It is only to keep the Real Time Clock running when there's no power to the....
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock

Nextion Enhanced 3.5 HMI Resistive Touch Screen UART LCD Display Module NX4832K035 480x320 + Acrylic Case Enclosure for Arduino Raspberry Pi

  • Compared to NX4832T035, NX4832K035 add new functions: support built-in RTC, save data to Flash, GPIO, larger flash capacity and faster CPU..
  • You can power NX4832K035 from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power board....
  • You need a USB to TTL adapter to plug nextion display into USB port..
  • The Battery (NOT included) is NOT used to supply power for display. It is only to keep the Real Time Clock running when there's no power to the....
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock

Nextion Enhanced 2.4 inch Display NX3224K024 Resistive Touch Screen UART HMI LCD Module 320x240 + Acrylic Case Enclosure for Arduino Raspberry Pi

  • Compared to NX3224T024, NX3224K024 add new functions: support built-in RTC, save data to Flash, GPIO, larger flash capacity and faster CPU..
  • You can power NX3224K024 from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power board....
  • You need a USB to TTL adapter to plug nextion display into USB port..
  • The Battery (NOT included) is NOT used to supply power for display. It is only to keep the Real Time Clock running when there's no power to the....
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock

Nextion Enhanced 3.2 inch NX4024K032 HMI TFT UART LCD Display Module Resistive Touch Screen 400x240 + Acrylic Clear Case Enclosure for Arduino Raspberry Pi

  • Compared to NX4024T032, NX4024K032 add new functions: support built-in RTC, save data to Flash, GPIO, larger flash capacity and faster CPU..
  • You can power NX4024K032 from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power board....
  • You need a USB to TTL adapter to plug nextion display into USB port..
  • The Battery (NOT included) is NOT used to supply power for display. It is only to keep the Real Time Clock running when there's no power to the....
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock