Reviews Network Card For Raspberry Pi

GeeekPi Raspberry Pi CM4 Router Board,Raspberry Pi Compute Module 4 Expansion Board Breakout Board Module for Raspberry Pi Compute Module 4 Series

  • CM4 Router Board is an expansion board based on the Raspberry Pi Compute Module 4. It brings Raspberry Pi CM4 two full-speed gigabit network ports and offers better performance, lower CPU usage, and higher stability for a long time work compared with a USB network card..
  • The board still retains the characteristic GPIO pin header of Raspberry Pi, which makes it applicable for connecting other hat board such as Pi hats, sensors, and PoE hat board, and cooling fan, etc..
  • There is also a USB2.0 interface that can be connected to USB flash driver, USB keyboard, printers etc..
  • Besides, there is an OLED(0.91 inch) screen will help you to customize your Router Board's information display style..
  • 1 x 0.91 Inch OLED Display (Pre-installed).
Check Stock

LoveRPi Power-Over-Ethernet (PoE) HAT Kit for Raspberry Pi 3 Model B+ with Black Case

  • ULTIMATE POWER OVER ETHERNET HAT FOR RASPBERRY PI 3 B+: Deliver clean and reliable power to the latest Pi 3 Model B+ by removing the problematic MicroUSB plug altogether! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters..
  • BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 3 Model B+ boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market..
  • POWER OVER ETHERNET SWITCH REQUIRED: Network switch must be compliant with IEEE 802.3af PoE standard. PoE power output must be within the budget of the switch when powering multiple boards. PoE switch and Raspberry Pi 3 Model B+ sold separately..
  • ANODIZED HEATSINK AND VENTILATED CASE WITH COOLING FAN INCLUDED: Raspberry Pi 3 Model B+ gets very hot and active cooling is the only way to prevent temperatures from exceeding 150°F! This kit includes everything you need to keep your PoE powered board operating at maximum performance. Raspberry Pi 3 Model B+ sold separately!.
  • NOT COMPATIBLE WITH RASPBERRY PI 4 OR RASPBERRY PI 3 MODEL B AND OLDER MODE....
Check Stock

UCTRONICS Upgraded Complete Enclosure for Raspberry Pi Cluster, with 4 Removable Mounting Brackets for Pi 4B, 3B+/3B, and Other B Model and 2 Cooling Fans ,Support 4 2.5\ SSD and Switch

  • 【Improvement】 In this version, we changed the assembly method based on the previous version(U6184), using frames to connect each side panel. The Complete desktop kit for Raspberry pi 4 Can accommodate 4 Raspberry Pi boards and 4 2.5” SSDs and an ethernet switch. It has 4 reserved SD card cut that allows you to access the SD card from the front of the rack with an extension board（not included）. Note: It comes disassembled and needs to be installed briefly before use..
  • 【Front Removable】 Each baseplate is independent so as to easily slide in-and-out, just fixed with thumbscrews, allowing you very convenient and quick access to each node within the cluster for maintenance..
  • 【Quality Built】Made of full metal material，black powder coat finish, have nothing breaking off, paint chips, sharp exposed edges (plate corners are rounded off smooth)..
  • 【Efficient Heat Dissipation 】Efficient Heat Dissipation - Dual 8cm 5V cooling fans provide enough airflow to keep your RPis cool quietly, with a convenient connector and free of light pollution, the fans also can help circulate the air in your closet if you locate the cluster in, so as to improve the heat dissipation of other network equipment..
  • 【Applications 】This is the perfect solution for b....
Check Stock

GeeekPi Raspberry Pi 4 4GB Starter Kit - 32GB Edition, Raspberry Pi 4 Case with PWM Fan, Raspberry Pi 5V 3.6A 18W Power Supply with ON/Off Switch, HDMI Cables for Raspberry Pi 4B (4GB RAM)

  • Includes Raspberry Pi 4 4GB Model B with 64-bit quad-core CPU (4GB RAM).For 2GB Version,please refer to ASIN: B0B7DFF7TY.
  • 8GB Version,please refer to ASIN:B09LYP7QH3.
  • This Raspberry Pi 4B case contains a super quite 40mm PWM fan and 4pcs heatsinks for good heat dissipation of Raspberry Pi 4B..
  • 5V 3.6A Type C Power Supply will make your Pi work more stable. With ON/OFF switch, it's convenient for you to power on and power off your Raspberry Pi 4..
  • 32GB High Speed Class 10 Card with Card Reader and adapter , can work with all version Raspberry Pi.
  • Package Includes:1x Raspberry Pi 4B (4GB RAM).
  • 1x 32GB SD Card (with Card Reader and Adapter).
Check Stock

Raspberry Pi 4 Portable Laptop, CrowPi-L Programming Kit, Built-in Battery and Fan, Python and Graphical Programming Learning, Switchable Dual System (RPI not Included)

  • 【Real Raspberry Pi Laptop】CrowPi-L is a cost-effective custom laptop designed for Raspberry Pi enthusiasts, for the learning of programming education. ​It integrates almost all peripheral accessories of Raspberry Pi. This Learning kit does NOT include a Raspberry Pi, please purchase Raspberry Pi 4B 8GB/4GB yourself, sorry for the inconvenience..
  • 【Getting Started with Programming】Whether you are a beginner in programming, a Raspberry Pi enthusiast, or a programming teaching school, CrowPi-L is a good choice for you. It is not only a laptop, but also a learning kit that integrates office, entertainment and programming..
  • 【Rich Programming Courses】CrowPi-L provides you with rich, systematic and progressive programming courses that make it easier to learn Letscode graphical programming and Python programming, whether you are a beginner or an advanced programmer..
  • 【Built-in Battery】We have collected the opinions of many CrowPi2 users and Raspberry Pi enthusiasts, and the new generation of CrowPi-L will be completely remodeled with a built-in 5000mAh battery, which supports the device to work independently for 3 hours..
  • 【Dual System Switching Function】CrowPi-L has a dual-system switching adapter board independently developed, which can ins....
Check Stock

GeeekPi Raspberry Pi 4 2GB Starter Kit - 32GB Edition, Raspberry Pi 4 Case with PWM Fan, Raspberry Pi 18W 5V 3.6A Power Supply with ON / Off Switch, 2PCS HDMI Cables for Raspberry Pi 4B (2GB RAM)

  • Includes Raspberry Pi 4 2GB Model B with 64-bit quad-core CPU (2GB RAM).For 4GB Version,please refer to ASIN: B0B3M2HKN6.
  • 8GB Version,please refer to ASIN:B09LYP7QH3.
  • This Raspberry Pi 4B case contains a super quite 40mm PWM fan and 4pcs heatsinks for good heat dissipation of Raspberry Pi 4B..
  • 18W 5V 3.6A Type C Power Supply will make your Pi work more stable. With ON/OFF switch, it's convenient for you to power on and power off your Raspberry Pi 4..
  • 32GB High Speed Class 10 Card with Card Reader and adapter , can work with all version Raspberry Pi.
  • Package Includes:1x Raspberry Pi 4B (2GB RAM).
  • 1x 32GB SD Card (with Card Reader and Adapter).
Check Stock

RasTech Raspberry Pi 3 Model B Starter Kit with 32GB Micro SD Card, Power Supply with ON/Off, Case, Micro SDHC Card, Cooling Fan, HDMI Cable, Network Cable, Heatsinks, Card Reader, Screwdriver

  • Geekworm Raspberry Pi 3B+/3B passive cooling aluminum case is designed for Raspberry Pi 3 Model B Plus and Raspberry Pi 3 Model B..
  • Design with good heat dissipation, passive cooling design, net weight up to 207 grams, don't need to install the cooling fan or heatsink.
  • Access to all ports of Raspberry Pi 3 Model B+ or Raspberry Pi 3 Model B , GPIO cable interface and TF card slot is reservered, support to install the gpio cable and TF card..
  • Made of high quality aluminum material. with 4pcs thermal tapes to attach on your Raspberry Pi 3B+/3B. For Raspberry Pi 3B+, attach the big thin thermal tape on CPU.
  • For Raspberry Pi 3B, attach the big thickness thermal tape on CPU..
  • Note: The Raspberry Pi 3 board is not included in the packing list. Packing List: √1 x Aluminum Case for Pi3.
Check Stock

GeeekPi Raspberry Pi 4 8GB Starter Kit - 64GB Edition, Raspberry Pi 4 Case with PWM Fan, Raspberry Pi 18W 5V 3.6A Power Supply with ON / Off Switch, HDMI Cable for Raspberry Pi 4B (8GB RAM)

  • Includes Raspberry Pi 4 8GB Model B with 1.5GHz 64-bit quad-core CPU (8GB RAM), For 4GB version, please refer to ASIN: B0B3M2HKN6.
  • For 2GB version, please refer to ASIN: B0B7DFF7TY.
  • This Raspberry Pi 4B case contains a super quite 40mm PWM fan and 4pcs heatsinks for good heat dissipation of Raspberry Pi 4B..
  • 5V 3.6A Type C Power Supply will make your Pi work more stable. With ON/OFF switch, it's convenient for you to power on and power off your Raspberry Pi 4..
  • Power supply with Professional Certification: TUV, RoHS Certification.
  • 64GB High Speed Class 10 Card with Card Reader and adapter , can work with all version Raspberry Pi.
  • Package Includes:1x Raspberry Pi 4B (8GB RAM).
  • 1x 64GB SD Card (with Card Reader and Adapter).
Check Stock

Geekworm Raspberry Pi 3 B+ Case, Raspberry Pi 3B+/3B Aluminum Alloy Heavy Duty Passive Cooling Metal Case with Heatsink Pillar for Raspberry Pi 3 Model B+/Raspberry Pi 3 Model B-Black (P252)

  • Geekworm Raspberry Pi 3B+/3B passive cooling aluminum case is designed for Raspberry Pi 3 Model B Plus and Raspberry Pi 3 Model B..
  • Design with good heat dissipation, passive cooling design, net weight up to 207 grams, don't need to install the cooling fan or heatsink.
  • Access to all ports of Raspberry Pi 3 Model B+ or Raspberry Pi 3 Model B , GPIO cable interface and TF card slot is reservered, support to install the gpio cable and TF card..
  • Made of high quality aluminum material. with 4pcs thermal tapes to attach on your Raspberry Pi 3B+/3B. For Raspberry Pi 3B+, attach the big thin thermal tape on CPU.
  • For Raspberry Pi 3B, attach the big thickness thermal tape on CPU..
  • Note: The Raspberry Pi 3 board is not included in the packing list. Packing List: √1 x Aluminum Case for Pi3.
Check Stock

UCTRONICS Raspberry Pi Cluster Case, Desktop Metal Rack Case, 4 Layers with 2 Cooling Fans Compatible with Raspberry Pi 4B and 2.5\ SSD

  • For All Raspberry Pi B Models: The metal enclosure is designed for Raspberry Pi and is compatible with Raspberry Pi 4B+/3B/3B+/2B/B+.
  • Supporting up to 4 2.5" SSDs (7mm thickness) and 4 Pi installations.
  • it allows you to add additional storage to your Raspberry Pi whenever and wherever you want, making it easy to build Raspberry Pi clusters and Raspberry Pi NAS servers. Please note that the thickness of a 2.5" SSD cannot exceed 7mm..
  • Side Opening Design: you can easily position the Raspberry Pi HDMI, audio, and power supply. Each layer is 40mm/4.57inch high, there is enough space for you to install 4 mini PoE hats and raspberry pi PoE+hat..
  • Made of metal aluminum, Size: 4.13*4.84*7.12inch.
  • the case is strong and durable, compact and lightweight. So you can easily place it anywhere on your desk. An SD card slot is reserved in the mounting bracket, which can be accessed from the front of the case using an SD card adapter (Asin: B09CKRDFTH). 4 additional screw holes on the top of the enclosure for stacking..
  • Easy to install: The case is not pre-assembled and requires simple installation once you get it in your hands. Each mounting plate uses M4 hand screws, making it easy to remove and install one of the units without a screwdriver..
Check Stock

Geekworm Raspberry Pi 4 Case, Raspberry Pi 4 Heatsink Aluminum Alloy Passive Cooling Case (P330)

  • 【Passive Cooling Aluminum Alloy Case】Geekworm Raspberry Pi 4 Case - P330 is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB/2GB/4GB/8GB version.
  • Cool your Raspberry Pi 4 without fans and noise..
  • 【Add Copper Heatsink for Better Cooling】Equipped with a CPU copper heatsink(to replace the thermal pad) to attach with CPU grease on CPU of Pi4 for better heat dissaption (Not include CPU grease).
  • 【High Quality Aluminum Material】Sturdy and durable, keep your Raspberry Pi 4 free from scratches, dust and damage..
  • 【Easy Access to Raspberry Pi 4 Ports】Easy installation. Easy access to all Raspberry Pi 4 ports, such as GPIO, Micro HDMI, TF Card, USB-C Power Supply ".
  • 【Packing List】1 x Raspberry Pi 4 Aluminum Alloy Case, 1 x Copper Heatsink, 1 x Screws Pack 【Note】NOT include raspberry pi board.
Check Stock

RETROFLAG PiStation CASE, Raspberry Pi 4 Case with 800x480 Pixel 4.3 inch LCD Monitor Display Screen, Stereo Speaker, Cooling Fan and 3pcs Heatsinks for Raspberry Pi 4 Model/Pi 4B (Pi 4 Case)

  • 【Raspberry Pi Monitor】 Retroflag PSOne Pi 4 CASE is upgraded version, specifically designed for Raspberry Pi 4 Model B, NOT compatible with other Raspberry Pi model. 4.3 inch Raspberry Pi monitor equipped with IPS screen and HD 800x480 pixel high resolution..
  • 【Safe Shutdown and Reset】 This is Retroflag Pi 4 CASE version with Safe Shutdown and Safe Reset function. It will be more safe for your SD card when shutdown and reset..
  • 【Easy to Assemble & Access】 Pi 4 CASE offers your Raspberry pi good protection with ONLY few steps to assemble, you can access to all ports of Raspberry Pi 4 Model B, such as power, audio, USB, LAN, MicroSD Card Storage, and Micro HDMI connector without opening the CASE..
  • 【Original PS One Console Style】We created this RETROFLAG Pi 4 case applying the most iconic element in the retro game world as a homage to the most classic console ever made, this Pi 4 case can make your Raspberry Pi 4B become a NES retro gaming machine in one second! Designed the CD-ROM drive for storing your SD cards in the appearance of a game cartridge..
  • 【Strong Heat Dissipation】RETROFLAG Pi 4 Case is equipped with a quiet cooling fan and 3pcs heatsink with better heat dissipation, could prevent system failure and Raspberry Pi 4B from o....
Check Stock

UCTRONICS PoE hat for Raspberry pi

  • For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included)..
  • Intelligent Temperature Control: the 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high..
  • Smaller Size: Save more space than the official HAT, can be held in the most case for Raspberry Pi.We recently released a new version of PoE HAT with fan, which can support 48V non-standard switches, please search B09MCGFX12.
  • NOTE: The network switch or power sourcing equipment (PSE) is needed to supply the PoE signal, and they must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads. For the non-isolated switch, such as some Ubiquiti switches can not provide proper isolation, they can only work with CAT 5E and CAT 6E network cable..
Check Stock