Reviews Net Extrusion Machine
eSUN PLAPlus Filament, Black, 1 kg
- 1Kg net (Approximately 2.2 lbs) filament with clear Spool.
- eSUN PLA pro 3D printer filament vacuumed sealed with desiccant. Superb layer bonding. Several times stronger than PLA.
- Recommended extrusion/nozzle temperature 210C - 225C, about 20 celsius higher than regular PLA.
- Spool Diameter: 8" - Spool Width: 2.50" - Spool hub hole Diameter: 2.05" - inner circle Diameter: 3.5".
Check StockBIGTREETECH Filament Runout Sensor Smart Filament Detector 1.75 mm Filament Break Detection Module in 3D Printer Accessories for SKR Mini E3 Octopus V1.1 3D Printer Control Board
- ❤【Auto Filament Runout Sensor】Smart filament sensor can detect consumables break and consumables such as exhaustion fail to pass through the module.Besides,it can be able to detect nozzle plugs, consumables entanglements, extrusion machine failure caused by the abnormal extrusion of filament..
- ❤【High Compatibility for Multiple Displays】Break detection sensor can support 2004LCD,12864 LCD. W hat’s more,it also supports both working modes of marlin and touch screen mode for TFT24/TFT35 E3 V3.0/TFT70 V3.0 and other touch screen of BIGTREETECH..
- ❤【Two Extrusion Can be Realize】Support remote and direct two extrusion ways and 1.75mm diameter filament..
- ❤【What Control Boards Can be Compatible with】 The board which has break detection interface can be used,like SKR V1.3/SKR V1.4 Turbo/SKR MINI E3/GEN L control board..
- ❤【Firmware Modification 】 Smart filament sensor use Marlin2.0.x firmware,you follow our github guide to modify firmware of your 3D printer..
Check StockFrabill Power Catch Net 26 x 30-Inch
- Ergonomically-designed handle eliminates torque and roll-over found in traditional round handles | Patented Pow'R Lok yoke slides handle through for....
- Brute Hoop unique hexagonal profile for reduced drag | Corrosion-proof stainless steel hardware.
- Dual "I-Beam" extrusion spans entire length of hoop for added strength | Tangle-Free weighted netting drops into water quickly.
- Hoop Size: 32" x 41" Sliding Handle Length: 48" Net Depth: 38" Mesh: 1/12".
Check StockeSUN 1.75mm Natural ABS 3D Printer Filament 1kg Spool (2.2lbs), Natural
- 1KG net (apximately 2.2 lbs) Filament with Clear Spool.
- eSUN ABS 3D Printer Filament Vacuumed Sealed With Desiccant.
- 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm).
- Recommended Extrusion/Nozzle Temperature 220C - 260C.
- Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check StockeSUN 1.75mm Gray ABS 3D Printer Filament 1kg Spool (2.2lbs), Gray
- 1KG net (apximately 2.2 lbs) Filament with Clear Spool.
- eSUN ABS 3D Printer Filament Vacuumed Sealed With Desiccant.
- 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm).
- Recommended Extrusion/Nozzle Temperature 220C - 260C.
- Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check StockGizmo Dorks Metal Copper Fill Filament for 3D Printers 1.75mm 200g
- Metal Copper (Copperfill with PLA base) 3D printer filament vacuumed sealed with desiccant.
- Extrusion nozzle temperature: 190 - 225 C.
- 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm).
- Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5".
- Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, and many more..
Check StockGizmo Dorks Polycarbonate Filament for 3D Printers 1.75mm 200g Black
- Polycarbonate 3D printer filament vacuumed sealed with desiccant is tough, strong filament that has high heat resistance.
- Extrusion nozzle temperature: 255 - 300 C.
- 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm).
- Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5".
- Printed parts made with Gizmo Dorks Polycarbonate filament have increased mechanical strength compared to ABS and PLA.
Check StockGizmo Dorks Polycarbonate Filament for 3D Printers 1.75mm 200g Blue
- Polycarbonate 3D printer filament vacuumed sealed with desiccant is tough, strong filament that has high heat resistance.
- Extrusion nozzle temperature: 255 - 300 C.
- 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm).
- Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5".
- Printed parts made with Gizmo Dorks Polycarbonate filament have increased mechanical strength compared to ABS and PLA.
Check StockComgrow 3D Printer PLA Filament 1KG 1.75mm Spool Black Color
- 1.75 mm diameter, PLA filament, 1 Kg (2.2 lbs) net weight. Please pass one end of the filament into the fixing hole to avoid being entangled after use..
- High quality PLA filament for your 3D printer..
- Compatible with any 3D printer that use 1.75mm diameter filament..
- Recommended Extrusion / Nozzle Temperature 180¡ãC - 215¡ãC..
Check StockeSUN 1.75mm Gray ABS+ 3D Printer Filament 1kg Spool (2.2lbs), Gray
- 1KG net (apximately 2.2 lbs) Filament with Clear Spool.
- eSUN ABS-PLUS 3D Printer Filament Vacuumed Sealed With Desiccant.
- 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm).
- Recommended Extrusion/Nozzle Temperature 220C - 260C.
- Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check StockeSUN 1.75mm Black ABS+ 3D Printer Filament 1kg Spool (2.2lbs), Black
- 1KG net (apximately 2.2 lbs) Filament with Clear Spool.
- eSUN ABS-PLUS 3D Printer Filament Vacuumed Sealed With Desiccant.
- 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm).
- Recommended Extrusion/Nozzle Temperature 220C – 260C.
- Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 2.05″ – Inner Circle Diameter: 3.5″.
Check StockCreality Official 3D Printer PLA Filament 1.75mm 1KG White
- High quality PLA filament for your 3D printer.After printing, please pass one end of the wire into the fixing hole to avoid the filament being entangled due to the loosening of the wire coil..
- 1.75 mm diameter, PLA filament, 1 Kg (2.2 lbs) net weight..
- Compatible with any 3D printer that use 1.75mm diameter filament..
- Recommended Extrusion/Nozzle Temperature 180°C - 215°C..
Check StockeSUN Silk PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Silver
- eSUN Silk PLA 3D Printer Filament Vacuumed Sealed With Desiccant..
- 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
- Recommended Extrusion/Nozzle Temperature 190C - 220C.
- 1KG net (approximately 2.2 lbs) Silk PLA Filament with New Black Spool.
Check Stock