Reviews Natural Gas Nozzle

WeldingCity 5-pk Gas Nozzle 169-715 169715 1/2

  • Premium gas nozzles (2-pk and 5-pk) for MIG welding gun in Miller Millermatic/MIGmatic and Hobart welders..
  • Gas nozzle 169715 (1/2" orifice, flush tip) for use with MIG welding gun M-10/M-15 (M-100/M-150) in Millermatic 135, 140, 175, 180, 210, 211, Passport and Passport Plus. Also replacement for gas nozzle 770-404 for some Hobart MIG welding guns such as H-9/H-10..
  • Gas nozzle 16972X and 200258 for use with MIG welding gun 150A - 400A M-25/M-40 series in Millermatic welders. 1/2" and 5/8" orifice.
  • tip-nozzle relationship recessed/flush/stick-out as per illustrated nozzle length for various part numbers..
  • Refer to your MIG welding gun user manual for selection of correct gas nozzle. Package of 2-pk and 5-pk. Volume discount available. Buy More Save More!.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

BISupply Heating Torch with 5 Meter Hose – Portable Torch Weed Burner Propane Torch Hose

  • After ensuring all connections are sealed, slowly loosen the gas tank valve and check for leaks.
  • Slightly loosen the blow torch flow valve and ignite directly at the nozzle, adjust the blow torch flow valve to reach the desired temperature.
  • Fire will extinguish naturally to remove gases from torch and hose.
  • [Built to Last]: Constructed of stainless steel, these weed burners are resistant to rust and corrosion.
  • The torch features a steel jet nozzle and a durable adjusting valve to control the flame size and temperature.
  • This kit also includes a natural rubber 5-meter hose that has a 300 PSI rating and is explosion proof.
  • Designed for use with 20 lb. propane tanks.
  • [Contents]: This propane torch weed burner kit includes (1) 33.5-inch (85.1 cm) Heat Gun with turbo blast trigger handle, flow valve knob, and jet nozzle torch tip, and (1) 15-foot (5 meters) gas torch hose.
  • The natural rubber hose weighs 1.8 lbs. (.8 kg) and is classified as “Class 2 – 6.5mm – Propane/Butane”.
Check Stock

24” Freestanding Commercial Gas Cook Stove Range with 4 Burners Cook Rite Stainless Steel Gas Hot Plate Burner- 100000 BTU

  • Supplied gas pressure regulator is factory set at 4”Natural Gas W.C., and 10”L.P. Gas W.C. and do not exceed 0.5 PSI (3.45kPa).
  • Four open type stainless steel tubular burners with cast-iron grates, per BTU is 25,000, total BTU is 100,000.
  • Dimensions (W x D x H): 24 x 27.6 x 13.1 inches.
Check Stock

Welding Nozzles 169-724 169724 1/2

  • 4PK Miller style MIG gas nozzle 169-724(169724).
  • 1/2" orifice, 1/8 in / 3.2 mm recessed tip, fits 169-724 nozzles for Miller M-25/M-40 MIG guns..
  • The gas nozzles don't fit Miller 180 or 190DescriptionPremium quality Miller style MIG gas nozzle 169724.
  • 1/2" orifice,1/8 in / 3.2 mm recessed tip, fits 169-724 nozzle adapter in Miller M-25/M-40 MIG guns.
  • The gas nozzles don't fit Miller 180 or 190.
Check Stock

TERA PUMP TRFA01 4-AA Battery Powered Fuel Transfer Pump w/ Flexible Intake hose and No-spill Auto-Stop Nozzle, attachable to gas cans and more

  • [ TRANSFER RATES ] Transfers up to 2.4 Gallons per Minute with Auto-Stop Nozzle - Patented No Leak Design with Built-in Auto-Stop Nozzle stops pump automatically when container is full & warns with a boisterous beep that Pump has automatically has stopped. Nozzle is is equipped with a locking clip to secure nozzle onto receiving receptacles for a hands-free experience.
  • [ RECOMMENDED ] Suitable for Gasoline, diesel, kerosene, light oils & non-potable water- Discharge Hose of 39-inch ( 3.25ft ) for refueling for farther distances - Discharge Hose Holder: Built-in nozzle holder for safe and convenient way of storing the discharge nozzle | Three (3) Gas Can Adapters includes, Fits most North American gas cans.
  • [ FLEXIBLE SUCTION TUBE ] Suction Tube length of about 18-inch, Fits 3-Gallon (~11.4-Liters) Gas Cans, 5-Gallon (~19-Liters) Gas Can & up to Jerry Cans - Suction end Outer Diameter: 1.2-inch - Back Saving: Lifting heavy gas cans will be a thing of the past.
  • [ BATTERY POWERED ] Powered with Four (AA) Batteries, Sold Separately or in Emergency situations operate with Two (AA) batteries during emergencies - Water-Resistant power buttons protects against accidental splashes - Works great with farm equipment, Industrial Vehicles and in Automotive Shops.
Check Stock

TERA PUMP Next Gen Rain-Proof Gas Fuel Pump with 4.25-ft Long Discharge hose, Battery Electric Siphon Pump with Auto Stop System for Car Trucks Fuel Cells Tractor Generators Snow blower

  • [ TRANSFER RATES ] Transfers up to 2.3 Gallons per Minute with Auto-Stop Nozzle - Patented No Leak Design with Built-in Auto-Stop Nozzle stops pump automatically when container is full without the need to press the off button preventing any Overflow. Nozzle is is equipped with a locking clip to secure nozzle onto receiving receptacles for a hands-free experience.
  • [ RECOMMENDED ] Suitable for Gasoline, diesel, kerosene, light oils & non-potable water- XL Discharge Hose of 51-inch ( 4.25ft ) for refueling for farther distances, refuel Racing Car's Fuel Cell with ease - Discharge Hose Holder: Built-in nozzle holder for safe and convenient way of storing the discharge nozzle | Four (4) Gas Can Adapters included: One (1) for Racing Cans & Three (3) Others fits most North American gas cans.
  • [ FLEXIBLE SUCTION TUBE ] Suction Tube length of about 23-inch, Fits 3-Gallon (~11.4-Liters) Gas Cans, 5-Gallon (~19-Liters) Gas Can, Jerry Cans, Racing Cans and up to VIP Racing Cans - Suction end Outer Diameter: 1.2-inch - Back Saving: Lifting heavy gas cans will be a thing of the past.
  • [ BATTERY POWERED ] Powered with Four (AA)....
Check Stock

Eastwood Mig135 Mig175 Mig Welding Nozzle Spool Gun Replacement

  • Replacement Tweco - Style Nozzle For Proper Shielding-Gas Flow.
  • This Will Replace The Defective Unit And Assure Proper Shielding Gas Flow.
  • Replace Original Mig 135 And Mig 175 Gas Nozzle.
  • Replace Assure Proper Shielding Gas Flow.
Check Stock

SÜA Heating Nozzle/Rosebud 6-MFN-1 Replacement for 100 Series Victor Torch Handles. Oxy/Propane

  • Heavy Duty Heating Tip/Nozzle/Rosebud with Mixer Replacement for 100 Series Victor torch handles.
  • Gases: Oxygen/(Propane, Natural Gas, Butane, Propylene) - Heat Output with Propane: 49,000 BTU/h.
  • This is a general purpose heating nozzle with multi-flame head, ideal for heat treating, metal bending, caloric metal expansion, priming, etc. Manufactured in high-quality copper and brass..
  • Please Check Tip Chart Picture for Sizes, Heating Capacity and other operational parameters. Always use flashback arrestors.
  • You will receive 01 Heating Nozzle Size: #6.
Check Stock

ESKONI Hand Crank Aluminum Rotary Gas Oil Fuel Hand Pump 10 Gpm Self Priming Dispenser

  • [ TRANSFER RATES ] Transfers up to 2.4 Gallons per Minute with Flow Control Nozzle. Control the flow by squeezing the nozzle lever, Lower Level Tigger Position is great for refueling gas, diesel and more & Upper lever trigger position is great for watering sessions. Nozzle can also be locked for longer watering or fueling sessions.
  • [ RECOMMENDED ] Suitable for Gasoline, diesel, DEF (AdBlue), non-potable water, kerosene, antifreeze, windshield washer fluid, mild detergents, agricultural chemicals & light oils - Discharge Hose of 120-inch ( 10ft ) for refueling for farther distances - Discharge Hose Holder: Built-in nozzle holder for safe and convenient way of storing the discharge nozzle.
  • [ TELESCOPIC TUBE ] Suction Tube length of about 15-inch to 20-inch, Fits 3-Gallon (~11.4-Liters) Gas Cans, 5-Gallon (~19-Liters) Gas Can, to 5-Gallon Pails & up to 20-Gallon Drum Barrels - Suction end Outer Diameter: 1.2-inch - Swivel Nut Nozzle prevents hose from tangling with 360 degree rotation.
  • [ BATTERY POWERED ] Powered with Two (D) Battery Powered, Sold Separately - Big Slide Switch: Big On/Off Switch - Works great with farm equipment, Industrial Vehicles and in Automotive Shops - U-Shaped battery compartment: U-shaped hook for easier storage.
Check Stock

Gas Blow Torch (Blowtorch) [Version 3]

  • ►Safe and Durable: The safety lock prevents accidental ignition. A broad base helps to prevent it from falling over. Long angled nozzle and burn-free finger guard keep your hand safely away from the flame. We crafted our culinary torch out of professional-grade materials, providing you with a safe and easy-to-use tool..
  • ►Refillable and Easy to Operate: Refill the kitchen torch with any brand of butane. Please note that butane gas is not included. Simply slide the security lock to open, light up with Piezo Ignition Technology. It is a portable mini torch that you can take for many outdoor activities like camping and BBQ..
  • ►Great Versatile Gift: The crème brûlée torch is ideal for caramelizing sugar atop creme brulee, glazing a baked ham, searing a steak, roasting bell peppers, melting cheese, and toasting breadcrumbs. It is also useful for lighting your fireplace, candles, or cigars, for hobbies, arts and crafts projects, jewelry making, welding, for multiple camping applications, dabs, and much more..
  • ►Adjustable Flame and Continuous Flame Mode: Piezo Ignition Technology allows for use at any angle, even upside d....
Check Stock

Replacement Gas Can Spout Vent Kit for Older Style Can with Flexible Fuel Nozzle Rubber Gasket Threaded Vent Cap Drill Bits Compatible with Gott Scepter Rotopax and Kolpin Most of Plastic Container Jug 1 2 5 10 Gallon

  • Gas can spouts are made of high strength ABS plastic, filling nozzle(8.07 inch long) are translucent that you can see the gas flowing through by color change.
  • Fuel tank spout is flexible can be bended up to 90 degree make gas/water easily flows outt.
  • Fuel can nozzle can be stored inside or in normal use position that convenient to transport and use.
  • Replacement Gas Can Nozzle Kit come with 3 types of vent cap that compatible with most of older and new style fuel can, it takes the vacuum effect away and allows continuous flow for faster pouring.
  • Gas can spout replacement and vent kit for most 1/2/5/10 gallon gas can and kettles, update your old cans instead of buying a new one.
  • Each kit includes: (1) Filler nozzle, (1) spout cap with Lanyard, (1) "O" ring gasket, (2) base caps, (1) yellow push-in vent cap,(1)black rear vent cap,(1)metal vent cap with install tool. 3 Kits included.
Check Stock

TERA PUMP Electric Multipurpose Gas Transfer Pump with Quick Stop Nozzle for Gas, Diesel, DEF & More

  • [ TRANSFER RATES ] Transfers up to 2.5 Gallons per Minute with Flow Control Nozzle. Control the flow by squeezing the nozzle lever, Lower Level Tigger Position is great for refueling gas, diesel and more & Upper lever trigger position is great for watering sessions. Nozzle can also be locked for longer watering or fueling sessions.
  • [ RECOMMENDED ] Suitable for Gasoline, diesel, DEF (AdBlue), non-potable water, kerosene, antifreeze, windshield washer fluid, mild detergents, agricultural chemicals & light oils - Discharge Hose of 39.4-inch for refueling for farther distances - Discharge Hose Holder: Built-in nozzle holder for safe and convenient way of storing the discharge nozzle.
  • [ SUCTION TUBE ] Suction Tube length of about 15-inch, Fits 3-Gallon (~11.4-Liters) Gas Cans, 5-Gallon (~19-Liters) Gas Can or up to 5-Gallon Pails - Suction end Outer Diameter: 1-inch - Swivel Nut Nozzle prevents hose from tangling with 360 degree rotation.
  • [ BATTERY POWERED ] Powered with Two (D) Battery Powered, Sold Separately - Big Slide Switch: Big On/Off Switch - Works great with farm equipment, Industrial Vehicles and in Automotive ....
Check Stock

AR Blue Clean PW909100K Universal Electric Power Washer Replacement Kit

  • Excellent for electric cold water pressure washers.
  • Includes replacement gun, lance with nozzle, turbo nozzle, high pressure hose, and detergent bottle.
  • Universal kit for electric pressure washers.
  • Not recommended for gas powered pressure washers.
  • Kit includes most popular replacement parts.
Check Stock