Reviews Nakamichi Shockwafe Pro 1ch Dtsx

Replacement Remote Control Controller for Nakamichi Shockwafe Elite 7.2.4 Channel 800W Soundbar

  • Replaced Remote Control For Nakamichi Shockwafe Elite 7.2.4 Channel 800W Soundbar.
  • No programming is required. Just install new alkaline batteries and it is ready for use..
  • Power Supply: 2X 1.5V AAA Alkaline Battery.
  • ONLY WORKS WITH NAKAMICHI SHOCKWAFE 7.1, 7.2 and 9.2 DTSX/DOLBY ATMOS/SSE soundbar systems. WILL NOT WORK WITH OTHER NAKAMICHI SOUNDBARS..
Check Stock

Nakamichi Shockwafe 7.1 7.2 9.2 DTS:X/Atmos/SSE Soundbar Remote (Does not Work w Other Models)

  • Remote control for Nakamichi Shockwafe 7.1, 7.2, 9.2 DTS:X/Dolby Atmos SSE Soundbars.
  • Will not work with Nakamichi Shockwafe Pro 7.1Ch 400W 45" Sound Bar with 8" Subwoofer (Wireless) and Rear Satellite Speakers or ANY OTHER Nakamichi soundbars systems, only the DTSX and SSE and Atmos series.
Check Stock

Replacement Remote Control Controller for Nakamichi Shockwafe Pro 7.1.4 Channel 600W Soundbar

  • Replaced Remote Control For Nakamichi Shockwafe Pro 7.1.4 Channel 600W Soundbar.
  • No programming is required. Just install new alkaline batteries and it is ready for use..
  • Power Supply: 2X 1.5V AAA Alkaline Battery.
Check Stock

NTQinParts Replacement Remote Control Controller for Nakamichi Shockwafe Pro 7.1.4, Shockwafe Elite 7.2.4, Shockwafe Ultra 9.2.4 Sound Bar (2022)

  • Replaced Remote Control For Nakamichi Shockwafe Pro 7.1.4, Shockwafe Elite 7.2.4, Shockwafe Ultra 9.2.4 Sound Bar (2022).
  • No programming is required. Just install new alkaline batteries and it is ready for use..
  • Power Supply: 2X 1.5V AAA Alkaline Battery.
  • Only works with model in photo, will not work with other Nakamichi soundbars..
Check Stock

Replacement Sound Bar Remote Control Controller for Nakamichi Shockwafe Ultra 9.2.4 Channel 1000W Soundbar

  • Work with Nakamichi Shockwafe Ultra 9.2.4 Channel 1000W Soundbar.
  • No programming or paring is needed. Just insert new batteries to get it work..
  • Will not work with Pro 7.1 2016 soundbar.
Check Stock

6-1-2 Inch 200 Watt 2-Way Component Speakers

  • NAKAMICHI NSM8517 || SPECIFICATIONS || Type : Mid Range Speakers (*) Size : 8'' (20.3cm) (*) Peak Power : 400W (*) N-Power : 60W (*).
  • Frequency Response : 85-12k Hz (*) Sensitivity (dB/W/m) : 93±3dB (*) Impedance : 4Ω (*) Mounting Depth : >3.3" (84mm) (*).
  • Voice Coil : KSVΦ30.5mm Magnet Mass : 21.6 Oz (613g) (*) Net Weight(1pr) : Approx. 2.7kg.
  • Nakamichi NSM8517 8 in. 400 Watt Peak Mid Range Speakers The Nakamichi mobile audio department was created as part of an ongoing tradition to provide the same quality and performance from their home audio range into the mobile audio industry..
  • Established since 2004, our small team has since grown Nakamichi from a small player in the mobile audio industry to a medium sized company with a full range of products..
Check Stock

4 Pcs Braided Wire Speaker Banana Plugs Audio Jack Connector for Speaker Cable 2 Pcs Black and 2 Pcs Red

  • PACKAGE INCLUDED: 4 pcs total (2 black + 2 red)..
  • HIGH QUALITY: 24 k gold plated Nakamichi banana plug. Gold plated connectors ensure perfect signal and quality sound..
  • EAST TO USE: These Nakamichi braided wire speaker banana plugs audio jack connector for speaker cables spade plugs make speaker wire installation....
  • SECURE CONNECTION: Not only do spade plugs make it easier to plug in bare wires, it's also safer this way with no chance of wires crossing creating a....
  • COMPATIBILITY: Accepts wire size up to 4mm. Accepts 8AWG to 20AWG speaker wire.Double screws locking, no soldering. These Nakamichi banana plugs are....
Check Stock

Memphis MXA850.5M 5-Channel Marine Amplifier

  • RMS Power/CH @ 4Ω: 60W x 4Ch + 175W x 1CH RMS Power/CH @ 2Ω: 100W x 4CH + 300W x 1CH RMS Power/CH @ 1Ω: 450W x 1CH RMS Power/Bridged 4Ω: 235W x 2CH THD.
  • Frequency Response: 20Hz – 20KHz/20Hz – 250Hz.
Check Stock

Replacement Remote Control Controller for Nakamichi NK6 Soundbar

  • Replaced Remote Control For Nakamichi Sound Bar NK6 Soundbar Speaker System.
  • No programming is required. Just install new alkaline batteries and it is ready for use..
  • Power Supply: 2X 1.5V AAA Alkaline Battery.
  • Only works with model in photo, will not work with other Nakamichi soundbars..
Check Stock

Pioneer Elite VSX-44 7.2-Channel Network A/V Receiver with HDMI 2.0

  • Pioneer ELITE 7.2-Channel AV Receiver with Ultra HD (4k/60p) Pass Through.
  • Gapless Playback, Dual Subwoofer Preout, Spotify Ready and Roku Ready.
  • Apple Air Play, DLNA, and HTC Connect Certified.
  • 80 W/ch (20 Hz – 20 kHz, THD 0.08% at 8 ohms FTC).
  • Dolby TrueHD/Dolby Pro Logic IIz/Dolby Digital Plus.
Check Stock

Nakamichi NSM8517 8 in. 400 Watt Peak Mid Range Speakers

  • NAKAMICHI NBF618S-II SPECIFICATIONS : N-Power: 100W | Peak Power: 650W | Distortion (THD): <0.2% | Signal To Noise Ratio: >90dB | Frequency Response: 20Hz-150Hz | Input Sensitivity, High Level: 0.5V | Input Sensitivity, Low Level: 110mV | Low Pass Filter: 50Hz-180Hz | Bass Boost: 0 to -12dB | Fuse Rating: 20A(Fixed) | Subwoofer: 6×9”, 2 ohm | Unit Dimension: 290x210x73mm.
  • Featuring 100 watts of RMS power driving a 6x8 inch woofer.
  • At just 72mm in height, the NBF618S can easily fit beneath most seats, including the newer electrical seats that come with most vehicles nowadays, ensuring easy compatibility..
  • Compatible with both high and low level inputs for both factory supplied units or aftermarket units. Add on a Nakamichi DSP for even more tuning possibilities..
Check Stock

SanJune Guitar Pedal Power Supply 12 DC Outputs Fully Isolated for 9V/12V/18V Effect Pedal (4V to 15V Adjustable)

  • Get rid of ground loops by using this isolated multi-output power supply to run all of your pedals at one time!.
  • ISP12 power supply offers 12 outputs that are fully isolated: 5CH x 9V, each 150mA.
  • Small and light with tons of quiet, noise-free DC power on tap ready to run a wide range of pedal types without crowding or weighing down your pedal board..
  • Eliminating gig-ending ground loop noise with reliable anti-circuit short circuit and overload protection circuit design. LED indicators keep you aware of pedal status..
  • It's housed in a tiny metal box - Mini size, powerful performance and durable use. Package includes: 1 x ISP12 pedal power supply, 1x power adapter, 1 x user manual, 12 x DC cables..
Check Stock

Panasonic SoundSlayer Dolby Atmos Soundbar for TV with Built-in Subwoofer, Small Home Audio Bluetooth-Enabled Speaker, Hi-Res Sound (SC-HTB01)

  • Powerful, Realistic Home Audio with Cinema-Quality 3D Sound: Experience full dramatic tension and realism of movies and TV with revolutionary Dolby Atmos technology and DTS.
  • individual sounds move all around you, delivering astonishing detail and depth.
  • Incredibly Compact with Mind-Blowing Sound: Its small size fits unobtrusively even in small spaces.
  • Panasonic partnered with Final Fantasy XIV (FFIXV) Online sound team to create a speaker with game-changing sound for movies, music, & games.
  • High-Definition 4K Content with No Loss in Image Quality: 2.1 Channel 3-Way Speaker System with 4K HDR passthrough ensures zero loss in image quality.
  • supports DTSX/DTSX virtual, adding spatial and temporal metadata to position audio objects in space.
  • Custom Settings for Optimized Sound: Experience new intensity and realism across every genre.
  • dedicated modes for movies and music, plus three gaming modes—RPG (Role-Playing Gamer), FPS (First Person Shooter) or Voice Mode (games with a lot of dialogue).
  • Connects to Everything: TV, Blu-ray player/recorder, PC or USB hard disk, or NAS with HDMI.
  • pairs to your smart devices via Bluetooth.
  • included remote control for ease and convenience..
Check Stock