Reviews Na Miata Exhaust

BRExhaust Stock Replacement Exhaust Kit For Mazda Miata MX-5 MX5 NA 1990 1991 1992 1993 1994 1995 - BRExhaust 106-0246 New

  • Fits, sounds and performs just like OEM - bolts on for an easy DIY installation, with no cutting or welding required. Longer exhaust pipes are replaced by multiple smaller sections, so they can be installed without having to remove axles or suspension..
  • Exhaust kits are manufactured from corrosion-resistant aluminized steel and include all the hardware, clamps and gaskets required for installation.
  • Leaves all emissions equipment intact, making it 50-state emissions compliant.
  • Fits 1990-1995 Mazda MX-5 Miata (chassis code NA).
Check Stock

ClutchMaxPRO Performance Chromoly Clutch Flywheel Compatible with 1990-1993 Mazda MX-5 Miata 1.6L 1994-2005 MX-5 Miata 1.8L 2004 2005 Miata Mazdaspeed NA6 NA8 NB (CPLSF10045)

  • ...lutchMaxPRO products comes with excellent customer support and limited manufacturer warranty of 12 months or 15,000 miles that covers issues related to performance, fitment and function. Buy with confidence!.
  • THE FOLLOWING PRODUCT IS COMPATIBLE WITH: 1990 - 1993 Mazda MX-5 Miata (1.6L DOHC 4cyl NA6.
  • must be used with 1994+ miata clutch), 1994 - 2005 Mazda MX-5 Miata (1.8L DOHC 4cyl NA8, NB), 2004 - 2005 Mazda MX-5 Miata Mazdaspeed (1.8L DOHC 4cyl Turbo MSM).
Check Stock

CravenSpeed Mazda NA NB NC ND MX-5 Miata Door Bushings | Made in USA

  • Increased rigidity in the car's weakest spot.
  • Easily replace your Miata's soft rubber bushings.
  • Designed to fit all generations of Mazda Miata (NA NB NC ND MX-5 Miatas).
Check Stock

iJDMTOY JDM Clear/White Lens Front/Rear Side Marker Light Housing w/ Pigtails Replacements Compatible With 1990-2005 Mazda Miata MX-5 NA NB, Replace OEM Amber/Red Sidemarkers

  • Compatible with 1990-1997 Mazda Miata MX-5 NA models (includes adapter/wiring pigtails to add power to sidemarkers) and 1998-2005 Mazda MX-5 Miata NB models.
  • Includes (4) (driver and passenger sides) white/semi-clear cover lens front and rear bumper side marker housing assembly.
  • Side marker lenses only, no bulbs are included.
  • Easy installation that is perfect for replacement, repair, or retrofit.
  • Instantly transform your ride and give it a modern and trendy JDM appearance with an OEM look and feel!.
Check Stock

Mutazu Performance Axle-Back Exhaust Muffler For Mazda Miata NB 1999-2005 T-304 (CBE-043A)

  • Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • i.e. Maximizing Smoothest High Exhaust Air Flow Rate / High Performance Racing Spec. Design.
  • Instantly Increases Horsepower/ Low End Torque / TIG Welded CNC Machine Flange for Resistance against Pressure and Corrosion.
  • Aggressive Deep Sound while Ensures Smooth Exhaust Gas Flow / Fitments: 1999-2005 Mazda Miata NB with 1.8 litter Engine.
  • Muffler Exhaust Tips: 3.5" Round / Piping Inlet Size: 2.5" OD.
Check Stock

Red Hound Auto Front License Plate Bumper Mounting Bracket Compatible with Mazda Miata 1999-2005

  • 1 Front Bumper License Plate Mounting Bracket (hardware not included).
  • Constructed of durable heavy duty black automotive grade steel, coated for rust and weather protection.
  • Genuine Red Hound Auto product, designed for a direct, perfect fit, approximately 12-7/16" wide (Reference: NA0150180A).
Check Stock

Mutazu Stainless Steel Aggressive Axle-Back Exhaust Muffler For Mazda Miata NB 1999-2005 Longitude mounting (MX3-023)

  • Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • i.e. Maximizing Smoothest High Exhaust Air Flow Rate / High Performance Racing Spec. Design.
  • Instantly Increases Horsepower/ Low End Torque / TIG Welded CNC Machine Flange for Resistance against Pressure and Corrosion.
  • Removable baffle / Aggressive Deep Sound while Ensures Smooth Exhaust Gas Flow / Fitments: 1999-2005 Mazda Miata NB with 1.8 litter Engine.
  • Muffler Exhaust Tips: 4" Round, Piping Inlet Size: 2.5" OD.
Check Stock

Coilovers for Mazda Miata MX5 MX-5 NA NB 1989-2005 Suspension Coil Spring Struts Shock

  • Fit for Mazda Miata MX5 MX-5 NA NB 1989-2005.
Check Stock

J2 Engineering J2-CBE-035 Cat Back Exhaust System [Compatible with 90-99 Mazda Miata]

  • 【FITMENT】Compatible with 1990-1999 Mazda Miata.
  • 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 – 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】Muffler tip type: rounded tip. Tip diameter (in): 4.5″. inlet/ outlet size (in): 2.25″. silencer included.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

Miata Is Always The Answer Premium T-Shirt

  • JDM roadster enthusiast, drop top convertible lovers. Eunos roadster NA NB vert drift missile time attack car. The most universal car to enjoy whether if it is at the track, through the canyon roads, or out in downtown. Miata is always the answer..
  • Makes great gift, men, tuning car enthusiasts, mechanics, engineers, fathers, sticker, street race lovers, boys. Japanese street mountain downhill drift inspired racing apparel for tuners and drifters. Car themed.
  • This premium t-shirt is made of lightweight fine jersey fabric.
  • Fit: Men’s fit runs small, size up for a looser fit. Women’s fit is true to size, order usual size..
Check Stock

DNA MOTORING CBE-MM90 Stainless Steel Cat Back Exhaust System [Compatible with 90-97 Mazda Miata MX-5 1.6L/1.8L]

  • 【FITMENT】Compatible with 90-97 Mazda Miata MX-5 1.6L/1.8L.
  • 【Quality Construction】Made of High Quality 409 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 – 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】2.5″ OD Inlet / 2.5″ OD Main Piping.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

DNA MOTORING CBE-MM90-BT Stainless Steel Cat Back Exhaust System [Compatible with 90-97 Mazda Miata MX-5 1.6L/1.8L]

  • 【FITMENT】Compatible with 90-97 Mazda Miata MX-5 1.6L/1.8L.
  • 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】2.5" OD Inlet / 2.5" OD Main Piping.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

MagnaFlow Cat-Back Performance Exhaust System Street Series Kit 15715 - Designed for the 1990-1997 Mazda Miata - 2.25in Main Piping, Single Straight Passenger Rear Exit, Polished 4in Exhaust Tip

  • MODERATE SOUND/STREET SERIES - Street Series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels. Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention. Specifically designed for the 1990-1997 Mazda Miata.
  • CAT-BACK PERFORMANCE - Extensive testing and dyno-proven power make this exhaust truly developed for the driven. It is designed to replace the original exhaust components following the catalytic converter. These systems are 50-state legal and designed to optimize power based on the factory calibration.
  • BOLT-ON INSTALLATION - MagnaFlow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. CNC precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation.
  • STAINLESS-STEEL CONSTRUCTION - Highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Built to be the exhaust that lasts the lifeti....
Check Stock