Reviews Multiple Mounting Options

Planet Bike Superflash 65 Bike Tail Light

  • Visibility up to 1 mile: two extreme lads provide visibility on the open road up to one mile.
  • Battery powered bike light: runs on two AAA batteries.
  • Bike ready: great light for providing more awareness to other riders and drivers when on your bicycle.
  • Water resistant: rugged outer shell provides water resistance.
  • Multiple mounting options: includes seat post and seat stay mounts and clip Mount for multiple mounting options.
Check Stock

2Way Custom Component Speaker System 6.5” 400 Watt Component with Electroplated Plastic Basket, Butyl Rubber Surround & 40 Oz Magnet Structure Wire Installation Hardware Set Included Pyle PLG6C

  • ...ensuring low distortion and providing an open sound stage.
  • HEAVY-DUTY COMPONENT: The 40 oz. magnet structure, special electroplated plastic basket, and 0.5” silk dome tweeter are what power these speakers and allow for a 90 Hz to 20 kHz frequency response.
  • It features a Standard 6.5” size that fits OEM locations.
  • MULTIPLE MOUNTING OPTIONS: Allows 3 mounting options - flush, surface, or angle. This 4-ohm component also features a mounting depth of 2.65”, ensuring your speakers will stay in place.
  • WIRING KIT INCLUDED: This audio speaker compensates the undersized wire found in many of today’s cars. Includes grills, wires, and mounting hardware. Midrange tweeter helps to provide smooth & loud sound.
  • 400watt 2way custom component system includes pair of woofers, tweeters, and crossovers.
  • 6.5inch woofers with yellow poly injection cones and butyl rubber surrounds.
  • 0.5inch silk dome tweeters with neodymium magnets and multiple mounting options.
  • Pair of passive crossover networks with 12 dB/octave slope.
Check Stock

Planet Bike Grateful Red bike tail light

  • Three Light modes: runs for up to 150 hours on super flash mode, 45 hours on courtesy mode, and up to 26 hours on steady.
  • Battery powered bike light: runs on two AAA batteries.
  • Bike ready: great light for providing more awareness to other riders and drivers when on your bicycle.
  • Water resistant: rugged outer shell provides water resistance.
  • Multiple mounting options: includes seat post and seat stay mounts and clip Mount for multiple mounting options.
Check Stock

Planet Bike Superflash Bike Tail Light

  • TWO LIGHT MODES: Runs for up to 100 hours on Superflash mode and up to 60 hours on steady.
  • BATTERY POWERED BIKE LIGHT: Runs on two AAA batteries.
  • EBIKE READY: Great light for providing more awareness to other riders and drivers when on your ebicycle.
  • WATER RESISTANT: Rugged outer shell provides water resistance.
  • MULTIPLE MOUNTING OPTIONS: Includes seat post and seat stay mounts and clip mount for multiple mounting options.
  • Rear bicycle light with flashing and steady modes.
  • Offers 1/2-watt Blaze LED and 2 eXtreme LEDs.
  • Lightweight, ultra-compact, weatherproof housing.
  • Attaches to almost any bike via bike mounts and clip mount.
Check Stock

Phanteks Glacier R160C Combo Reservoir for DDC Pump, Transparent Acrylic Backplate, Integrated Digital-RGB Lighting

  • Transparent Acrylic Backplate allows for a more spacious look and integrated Digital-RGB lighting for an immersive effect.
  • Vertical or Horizontal mounting options and unique inner tube design to minimize air bubbles.
  • With the drgb control of our compatible Phanteks cases, the cable can synchronize with the case. You can sync with motherboards’ That support the 3pin drgb header.
  • Viton rubber O-Ring for maximize sealing and durability.
  • Easy installation with a universal 120/140mm fan mounting bracket.
  • Multiple Ports for flexible water loop planning.
  • universal Fan bracket for multiple mounting options.
Check Stock

Glide Gear TMP 1000 Professional Video Camera Tablet Teleprompter

  • 15mm Rail system, adjustable height camera sled with multiple 1/4 and 3/8 options.
  • hard plastic carry case, 1 or 2 tripod set up.
  • adjustable height camera sled with multiple 1/4 and 3/8 options.
Check Stock

8 Inch Cold Shoe Extension Bracket - Dual Sided Camera Flash Mount with D-Flashner Adapter by Cam Caddie - Black

  • CUT DOWN YOUR SETUP TIME - Our Quick Release design allows you to mount multiple accessories in seconds and start shooting. Perfect for run & gun situations or stealing shots in public areas..
  • Built on the traditional flash shoe platform that virtually all cameras use. Mount multiple photo/video Flash Shoe Accessories to any camera with a standard Flash Shoe footprint..
  • The Flashtrak Extension is dual sided allowing for accessories to be mounted to the top and bottom of the Extension bracket. This doubles the mounting options and configurations..
  • Combine multiple Flashner Kits to create additional mounting options. Seamlessly attach and detach LED lights, field monitors, microphones, field recorders, and lavalier transmitters..
  • Available in five sizes: 4, 6, 8, 12, and 16 inch lengths. The Flashner Kits are an essential piece of gear that no photographer of Videographer should ever be without..
Check Stock

MAGICRIG BMPCC 4K / BMPCC 6K Camera Cage Kit for Blackmagic Design Pocket Cinema Camera 4K / 6K

  • ... Perfectly compatible - Form-fitting design with unobstructed battery & SD card access.Securely locked by 1/4'' screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting..
  • Multiple mounting interfaces.This cage equipped with built-in cold shoes and multiple 1/4'' & 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories..
  • T5 SSD holder. Two M5 knob screws are used to lock the T5 SSD and its USB-C cable. There are a variety of mounting options to give you more options. The mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws..
  • It consists of a cage with a Top handle and a T5 SSD holder. This top handle equipped with built-in shoe mount for microphone and LED lights also provides 1/4" & 3/8" mounting points for additional accessories..
Check Stock

Minoura Accessory Holder on Handlebar with LW-Clamp for Up 2 Devices (Over Size)

  • Create extra space for mounting multiple accessories such as head lights or computers on your handlebar or seatpost.
  • Separate clamp and holder allow multiple options for mounting angle.
Check Stock

12 Inch Cold Shoe Extension Bracket - Dual Sided Camera Flash Mount with 1/4'-20 Flashner Adapter by Cam Caddie - Black

  • CUT DOWN YOUR SETUP TIME - Our Quick Release design allows you to mount multiple accessories in seconds and start shooting. Perfect for run & gun situations or stealing shots in public areas..
  • Built on the traditional flash shoe platform that virtually all cameras use. Mount multiple photo/video Flash Shoe Accessories to any camera with a standard 1/4"-20 threaded socket.
  • The Flashtrak Extension is dual sided allowing for accessories to be mounted to the top and bottom of the Extension bracket. This doubles the mounting options and configurations.
  • Combine multiple Flashner Kits to create additional mounting options. Seamlessly attach and detach LED lights, field monitors, microphones, field recorders, and lavalier transmitters.
  • Available in five sizes: 4-inch, 6-inch, 8-inch, and 16-inch. An Essential piece of gear for any Blackmagic Design PCC, Canon EOS C700, ME20F-SH, RED Epic, Epic Dragon, Sony FS700, or Panasonic, AG-160, AG-DVX200 4K, AG-HPX170, AG-HPX250, AG-HPX300 camera user.
Check Stock

4\ Digital Hygrometer Indoor Thermometer Temperature and Humidity Gauge Monitor Indicator Room Thermometer with Backlight LCD Display Humidity Meter

  • 【Large Backlit Display】4'' Large & Clear Backlit LCD Display The Clear Backlit LCD display with huge digits allows for viewability at any angle and light condition. To conserve battery power, backlight automatically turns off after 10 seconds..
  • 【Air Comfort Indicator】Humidity meter shows the comfort level of your home,There are three level: DRY, COMFORT, WET, based on current humidity level, always be aware of your home conditions..
  • 【MAX & MIN Records】Humidity Monitor with Indoor Thermometer stores and displays 24 hours MAX & MIN humidity and temperature records..
  • 【Multiple Mounting Options】The wall-mountable hanging hole and the tabletop holder gives multiple mounting options. It is convenient for different places like kitchen, garden, greenhouse, basement, baby room, office, etc..
  • 【Highly Accurate Readings】 The thermometer hygrometer features premium sensors provide accurate humidity and temperature readings for both indoor and outdoor simultaneously.
Check Stock

HYPERLITE 2 Pack 30W LED Flood Light Outdoor with Knuckle Mount, Wall Mount 5000K 3,300Lm IP65 Waterproof LED Security Lights for Yard Garden Garage UL Listed

  • ✅ AMERICAN STANDARD FLOOD LIGHT - Hyperlite Guarder Series LED flood light is specifically designed for American consumers, which is better than European standard outoor flood light. Waterproof, high brightness, multiple mounting options, UL certification, these are reasons why you need to choose our flood lights..
  • ✅ MULTIPLE MOUNTING OPTIONS - Hyperlite American standard LED outdoor flood lights are available in two mounting options (knuckle, wall mount)-without plug, so you can easily install the flood light on the ground with knuckle,or install it on the wall with wall-mounted kit,used as led wall pack light with base, which are both available with bases and screws, so that Hyperlite outdoor LED flood lights can be suitable for a wider range of applications..
  • ✅ HIGH BRIGHTNESS - Hyperlite LED American flood lights have a luminous efficacy of up to 120Lm/w, wide beam angle (120*60), and our American LED flood lights provide 5000K daylight illumination..
  • ✅ IP65 WATERPROOF - LED Flood Light with IP65 waterproof, this LED flood light outdoor is ideal for indoor and outdoor wet location, suitable for flag poles,backyard, garden, lawn, garage, street, entrance, wall, eaves,patio as well as LED security light in hallways,warehouse, workshop etc..
Check Stock

MAGICRIG BMPCC 4K /6K Cage with NATO Handle + T5 SSD Card Mount Clamp for Blackmagic Pocket Cinema Camera BMPCC 4K /6K

  • ... Perfectly compatible - Form-fitting design with unobstructed battery & SD card access. Securely locked by 1/4'' screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting..
  • Multiple mounting interfaces. The cage is equipped with multiple 1/4'' and 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories..
  • T5 SSD card holder. Two M5 knob screws are used to lock the T5 SSD and its USB-C cable. There are a variety of mounting options to give you more options. The mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws..
  • It consists of a cage with a NATO handle and a T5 card holder. This handle is equipped with the hole pattern for ARRI accessory mount pins, you can attach compatible extension blocks, also provides 1/4" & 3/8" mounting points for additional accessories .The handles are easy to transport and offer more convenience for low angle shooting..
Check Stock