Reviews Mtm Medium Speed Trapezium

Adam Audio A5X Powered Studio Monitor

  • Mix longer with less effort: iLoud MTM uses a midrange-tweeter-midrange symmetrical design, with a pair of 3.5” high performance woofers and one 1” high definition, back-chamber loaded tweeter, which provides ultra-precise, defined, point source sound that can’t be achieved by traditional 2-way systems at close distances. This minimizes the ear fatigue caused by traditional 2- or 3-way designs, where different frequencies arrive at your ear at different times..
  • Room Correction: iLoud MTM’s built-in self-calibration via included ARC reference microphone, means it adjusts in seconds to any placement, including ceiling-mounting, correcting their output to ensure the most precise, balanced sound from every position, without struggling with placement and spacing. Just set up the monitors, put the microphone in your preferred listening position, press a button and you’ll instantly have a custom calibration for the sweet spot of your listening environment..
  • Optimized DSP performance with 80 Hz cutoff filter for Atmos: iLoud MTMs are now available in the Dolby Audio Room Design Tool (DARDT) for Atmos systems for precise installation so you can quickly, easily and precisely install a multi-monitor setup that adheres to Dolby’s standards, anywhe....
Check Stock

MTM Pistol Rest

  • MTM Pistol Rest has adjustable base that locks into the fork at 20 different positions.
  • Accommodates anything from a Derringer to a 14" Contender.
  • Designed to use without sandbag, but may be used with one.
  • Pistol Rest's fork features MTM's special "over-molded" rubber coating to protect and grip handgun.
Check Stock

MTM Case-Gard EZ-Throw-II Red

  • One-piece plastic thrower featuring MTM's unique "power curve".
Check Stock

MTM EZ-Throw Long Range Clay Target Thrower

  • Plastic clay target thrower featuring MTM’s unique “power curve”.
  • The original MTM clay target thrower, plus a 35 inch handle extension.
Check Stock

Case Club 3 Pistol & 6 Magazine Holder Large AC-11 MTM Ammo Can Foam Pre-Cut Closed Cell Military Grade Foam

  • Foam only, AC-11 MTM ammo can is NOT included with order.
  • Foam will ONLY fit inside Large AC-11 MTM Plastic ammo can.
  • Foam insert is (closed cell) military grade polyethylene which can be wiped clean.
  • Set includes 3 pieces. Soft lid foam, denser base foam with cutouts, dense flatpad for the bottom.
Check Stock

Kanto MTM82PL2 Height Adjustable Mobile TV Stand with Two Adjustable Shelves for 50-inch to 82-inch TVs

  • SUPPORTS 200 POUNDS - Constructed out of steel, the MTM82PL2 safely supports 50” to 82” TVs weighing up to 200 pounds, and features adjustable....
  • TWO DEVICE TRAYS - The MTM82PL2 includes two height-adjustable steel trays capable of supporting up to 25 pounds total, providing stable surfaces for....
  • SIMPLE HEIGHT ADJUSTMENT - Height adjustments are made easy with two buttons located on the center columns. In 2″ increments, place the center of....
  • INTEGRATED CABLE MANAGEMENT - Keep your cables organized and out-of-sight by routing them through the stand's hollow support columns..
  • QUICK RELEASE WHEEL LOCKS - Ensure your equipment remains stable with four wheel locks. Simply step down on the pedal to enable the locking mechanism....
Check Stock

Eris E66 Active MTM Dual 6' Studio Monitor

  • Nested MTM (D’Appolito) design with dual woven composite drivers provides smooth on- and off-axis response with more dynamic output than conventional two-way studio monitor configurations..
  • MTM (D’Appolito) design minimizes phase displacement and leads to improved spatial resolution and a much wider sweet spot..
  • Dual 6.5-inch, custom-woven Kevlar LF/midrange drivers produce dynamic, size-defying bass output and detailed mids..
  • 1.25-inch, silk-dome HF driver ensures smooth high-frequency performance that is never fatiguing to the ears..
  • Includes Studio One Prime and Studio Magic plug-in suite, over $1000 USD worth of music production software..
  • Unique design supports vertical and horizontal loudspeaker placement to fit into any mix environment..
  • Acoustic tuning controls help to compensate for room anomalies, providing a consistent frequency response customized for your mix environment..
  • Balanced XLR, balanced ¼-inch TRS, and unbalanced RCA inputs provide flexibility for seamless integration into any environment..
  • 140W Class A/B bi-amplification for an open, clear sound..
  • Continuously variable HF and MF controls (-6 to +6 dB) help further fine-tune the sound for the space you’re in..
Check Stock

Prewired Loaded Pickguard SSS Pickups,Guitar Single Coil Alnico Pick Ups,3-Ply Pick Guards Set with 5-Way Switch,Scratch Plate for Fender Stratocaster

  • 【Application】LAMSAM Guitar pickguard and pickups set fit for Fender stratocaster or SQ, MTM, a good choice for replacements of pick guard, please pay attention to the specifications.
  • 【Easy to Install】complete pickup and controls were pre-wired and attached to a scratch guard, with good and clean pots.
  • it's a great way to save money and speed the completion of your solidbody guitar, only need to take a few minutes to wire to your output jack and grounding to your guitar bridge.
  • 【Staggered Alnico V Pickups on 3-ply plastic pick guards】pickups have alnico V bar maganets under each coil, making the pups to sound clarity and bright,.
Check Stock

Vileda SuperMocio Microfibre & Power Mop Refill

  • Flat mop for extra thorough cleaning of wet floors right up to the corners.
  • Trapezium shape for optimum cleaning in corners.
  • Removes even the most stubborn dirt thanks to its microfibre and CollecTex material.
  • Ideal for cleaning larger surfaces and parquet and laminate floors.
  • Telescopic arm extendible from 80–140 cm.
Check Stock

wolfcraft 4009000 Triple-Blade Edge Planer Black

  • For front edges with a perfect 35° angle.
  • For clean transitions between two plasterboards, permits subsequent gentle and fast filling.
  • Suitable for board thicknesses of 9.5 and 12.5 mm.
  • Three blades for precise cutting edge in one pass, controlled and safe working from the first to the Last millimetre.
  • Including: 3 trapezium blades, 52 / 0,50 mm.
Check Stock

homozy Triple-Blade Edge Planer Gypsum Board File Planing Wallboard Rasp Trimmer

  • Three for cutting edge in one pass, controlled and safe working from the first to the Last millimetre..
  • For clean transitions between two plasterboards, permits subsequent gentle and fast filling..
  • For front edges with a perfect 35° angle..
  • Suitable for board thicknesses of 9.5 and 12.5 mm..
Check Stock

MTM Hydro Pressure Washer Extension Wand - 15 Degree Bent, 20\ Long Stainless Steel Lance - 4100 PSI High Pressure Accessories for Pressure Washing Guns and Foam Cannons

  • ...: These pressure washer extension wands use a light 15° degree bent angle and long 20" construction to allow you to reach low wheel wells, tops of walls, and gutters without strain. The universal quick connect fittings makes these perfect for any pressure washer guns, surface cleaners & water brooms..
  • MADE TO LAST: MTM Hydro pressure washer spray accessories are a perfect replacement or addition to any pressure washer system. The ultra-durable lightweight construction and quick connect hookups give you commercial-grade performance in a more comfortable, more durable, easier-to-use package..
  • SPECIFICATIONS: Our 20 inch long, 15° degree bend pressure washer gun extension wands are rated for 4100 PSI and a maximum of 10.5 gpm. It can handle high temperatures up to 300℉. The lances use stainless steel construction, a 1/4" plug inlet and a 1/4" coupling outlet..
  • CUT THROUGH THE CRUD: Blast away dirt, grime, and caked on mess the easy way with professional grade-commercial power washing pressure. These lances are perfect for driveways, sidewalks, houses, auto detailing, cars, trucks, boats, RVs, and more.
  • HEAVY-DUTY QUALITY, PROFESSIONAL ASSURANCE: MTM Hydro has been an industry leader in car detailing tools, pressure washing parts and accessories, supplie....
Check Stock

3M Reusable Full Face Mask Respirator 6900

  • Unique center adapter to direct exhaled breath and moisture downward, helps reduce debris.
  • Large lens for wide field of view and excellent visibility.
  • 3mtm cool flowtm valve for cooler, drier comfort.
  • Lightweight, well-balanced design with silicone faceseal for enhanced comfort and durability.
  • Air purifying respirator (apr), supplied air (sa) and powered air purifying respirator (papr) modes.
Check Stock