Reviews Msata Hdd Carrying Case

StarTech.com 2 Port PCI Express 2.0 SATA III 6Gbps RAID Controller Card w/ 2 mSATA Slots & HyperDuo SSD Tiering - PCIe SATA 3 Controller (PEXMSATA3422)

  • Combine SSD performance w/ HDD capacity & create a HyperDuo array with 2 mSATA + 2 SATA drives through your computers PCIe slot.
  • 2 Port PCI Express 2.0 SATA III 6Gbps RAID Controller Card w/ 2 mSATA Slots & HyperDuo SSD Tiering / mSATA Adapter.
Check Stock

Geekworm T300 V1.1 2.5 inch SATA SSD/HDD Shield Storage Expansion Board Compatible with Jetson Nano A02/B01/2GB/4GB Developer Kit

  • Geekworm 2.5" SATA HDD/SSD storage board compatible NVIDIA Jetson Nano A02/B01/2GB/4GB that supports up to 4TB 2.5-inch SATA hard disk drives (HDD) or solid-state drive (SSD), User manual, refer to Geekworm WiKi search T300..
  • Ideal storage solution for Jetson Nano- 2.5" SATA HDD/SSD Shield.
  • for the T300 metal case, refer to ASIN: B07W7CNSR8.
  • for the T130 mSATA SSD shield, refer to ASIN: B088N6VZL8..
  • A good quality power supply is required, otherwise the hard disk will not be recognized or the system will automatically shut down. THIS IS VERY IMPORTANT!! Strongly recommend ASIN: B07413Q5Y4.
  • Specially-made USB3.1 bridge to connect with Jetson Nano - no additional cables needed.
  • Intelligent power management - Automatic powering off when system shutdown.
Check Stock

Geekworm for Raspberry Pi 4, X857 V2.0 mSATA SSD Expansion Board + X735 V3.0 Power Management with Safe Shutdown & PMW Cooling Fan Expansion Board (Not Include Raspberry Pi 4)

  • √[Important] It is strongly recommend to use 5.8G wifi AP instead of 2.4G wifi AP, according to the feedback if use the external USB device (like mouse, keyboard, display) or use X857-C3 metal case(ASIN:B08VJ6P48B ), the system maybe unstable or not boot from the SSD. Also pls format the new SSD before use..
  • √X857 V2.0 mSATA adapter only design for Raspberry Pi 4 Model B(1GB/2GB/4GB/8GB), Supports up to 1TB mSATA interface SSD hard disk..
  • √Update in 2022: X735 V2.5 has been update to X735 V3.0 version with width voltage DC 6V-30V input on march 28th 2022 and remove latching switch port. You must install shell script to enable the PWM fan to work since it need PWM signal to run, refer to X735 Software on WiKi..
  • Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying, pls refer to: raspberrypiwiki (Does_the_X825/X855_support_USB_boot).
  • √ Matching metal case for RPi 4&X857 V2.0&X735/X708, pls refer to X857-C3 Case(ASIN:B08VJ6P48B ), BUT note the power control switch should be connect to X735(ASIN:B07R45W1LN)/X708(ASIN:B08DNRYM4Y), there is no PWR port for external power switch on X857 V2.0..
Check Stock

Geekworm X820 V3.0 2.5“ SATA HDD/SSD Storage Expansion Board, USB 3.0 Mobile Hard Disk Module for Raspberry Pi 3 B+/3B/ROCK64/Tinker Board&2.5 Inch SATA HDD/SSD

  • ...motherboard/ROCK64, Support up to 4TB 2.5 inch SATA interface hard disk drives (HDD) / solid-state drive (SSD). A good raspberry pi sata adapter for Raspberry Pi 3B+, 3B, 2B, B+, ROCK64. Note: For Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD storage board, please refer to ASIN:B07VXF2HJG.
  • For Raspberry Pi 4 Model B mSATA SSD storage board, please refer to ASIN: B07VXFGFLX.
  • ✔ X820 V3.0 supports USB booting from your HDD/SSD('reboot' command is supported), a useful and reliable function to every raspberry pi users or fans. Suggest to use with geekworm x820 metal case(ASIN :B07GRZRW7J).
  • User manual, pls refer to Geekworm WiKi search(X820)..
  • ✔ Powers the Raspberry Pi via Pi's 40-pin header or Micro USB socket.
  • Furthermore, On-board XH2.54 connector and USB power socket (5V 2A output) to power other devices, such as smartphone, tablet... WARNING:Do not power your Raspberry Pi via the Pi's 40-pin header and micro-USB socket at the same time..
  • ✔ X820 can be used as a USB3.0 Mobile Hard Disk when connecting a 2.5 inch SATA interface HDD/SSD do not need extra power and free driver installation. Quick file transfer with high-speed USB 3.0 connectivity from a PC or a Mac..
Check Stock

Desktop Computer Fanless Mini PC with Intel Quad Core N3150/N3160/J3160 Partaker B5 Barebone System

  • CPU: intel Celeron N3150 Quad Core, Base Frequency: 1.6GHz.
  • Burst Frequency:2.08GHz, Quad Thread, 2M Cache, Code Name: Braswell.
  • Support 1*DDR3L RAM, 1*mSATA SSD, 1*2.5 inch SSD/HDD.
  • Features: Smart Design, Fanless, Metal Case, Silent working, 2 Year Warranty.
  • 2*LAN, 2*HD Ports, 4*USB3.0, 2*USB 2.0, audio in/output.
Check Stock

Geekworm Raspberry Pi 4 mSATA SSD Adapter X857 V2.0, Raspberry Pi 4 Model B X857 V2.0 mSATA SSD Expansion Board USB3.0 Module for Raspberry Pi 4B UASP Supported ONLY

  • ...WiFi AP instead of 2.4G wifi AP, according to the feedback if use the external USB device (like mouse, keyboard, display) or use X857-C3 metal case(ASIN:B08VJ6P48B ), the system maybe unstable or not boot from the SSD. Also MUST format the new SSD before use..
  • √X857 V2.0 mSATA adapter only design for Raspberry Pi 4 Model B(1GB/2GB/4GB/8GB), UASP supported for Pi 4, NOT support TRIM, Supports up to 1TB mSATA interface SSD hard disk..
  • √ How to power RPi 4&X857 V2.0: 5Vdc +/-5% , Powered by Raspberry Pi 4 Type-C Power In port.
  • √ How to power RPi 4&X857 V2.0& X735: 5Vdc +/-5% , Powered by X735 Type-C or DC5525 Jack Power In port.
  • Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
  • √ Matching metal case for RPi 4&X857 V2.0&X735/X708, pls refer to X857-C3 Case(ASIN:B08VJ6P48B ), BUT note the power control switch should be connect to X735(ASIN:B07R45W1LN)/X708(ASIN:B08DNRYM4Y), there is no PWR port for external power switch on X857 V2.0..
  • √ Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying, r....
Check Stock

External Hard Drive Case - Shockproof EVA Carrying Case for WD My Passport Element Seagate Expansion Backup Toshiba - High Protection Portable Travel Electronic Power Bank Bag (Black)

  • ● Wide Compatibility: This external hdd case is perfect for carrying Western Digital WD My Passport USB 3.0, Seagate Expansion Backup, Toshiba 500G 1TB 2TB 3TB 4TB external hard drive, Anker Jackery RAVPower power banks, etc..
  • ● High Protection: This external hard drive case is made of eva material and equipped with two ribber zippers, it’s shockproof and durable..
  • ● Compact Size: Exterior size: 7.2 x 3.9 x 1.9 inches.
  • Interior size: 6.9 x 3.7 x 1.4 inches. This small travel case is widely used for electronic gadgets organizer, like cell phone, bluetooth earpiece, hard disk, usb cable, memory card..
  • ● Easy Carrying: This portable carrying case is small and lightweight, which could allow this hard case to easily fit into any backpack or briefcase..
  • ● Fashionable Design: The shockproof eva case build-in a mesh pocket and a elastic strap to keep your HDD in place. No worry about a mass of gadgets..
Check Stock

Orange Shockproof Hard EVA Carrying Case Travel Pouch for External Hard Drive, Power Bank, Cell Phone, Cable, Cord - Portable Small Electronic Accessories Organizer Storage Zipper Pouch

  • ● Wide Compatibility: This external hdd case is perfect for carrying Western Digital WD My Passport USB 3.0, Seagate Expansion Backup, Toshiba 500G 1TB 2TB 3TB 4TB external hard drive, Anker Jackery RAVPower power banks, charging cable, cell phone, u disk, coin, etc.
  • ● High Protection: This external hard drive case is made of eva material and equipped with two ribber zippers, it’s shockproof and durable.
  • ● Compact Size: Exterior size: 7.2 x 3.9 x 1.9 inches.
  • Interior size: 6.9 x 3.7 x 1.4 inches. This small travel case is widely used for electronic gadgets organizer, like cell phone, bluetooth earpiece, hard disk, usb cable, memory card.
  • ● Easy Carrying: This portable carrying case is small and lightweight, which could allow this hard case to easily fit into any backpack or briefcase.
  • ● Fashionable Design: The shockproof eva case build-in a mesh pocket and a elastic strap to keep your HDD in place. No worry about a mass of gadgets.
Check Stock

Power Bank Storage Case – GLCON Hard EVA Protective Travel Case – Small Electronic Carrying Pouch for Hard Drive, Cell Phone, Charging Cable, External Battery, Earbuds (Light Green)

  • ● Wide Compatibility: This external hdd case is perfect for carrying Western Digital WD My Passport USB 3.0, Seagate Expansion Backup, Toshiba 500G 1TB 2TB 3TB 4TB external hard drive, Anker Jackery RAVPower power banks, charging cable, cell phone, bluetooth earpiece, coin, etc.
  • ● High Protection: This external hard drive case is made of eva material and equipped with two ribber zippers, it’s shockproof and durable.
  • ● Easy Carrying: This portable carrying case is small and lightweight, which could allow this hard case to easily fit into any backpack or briefcase.
  • ● Compact Size: Exterior size: 7.2 x 3.9 x 1.9 inches.
  • Interior size: 6.9 x 3.7 x 1.4 inches. This small travel case is widely used for electronic gadgets organizer, like cell phone, bluetooth earpiece, hard disk, usb cable, memory card.
  • ● Fashionable Design: The shockproof eva case build-in a mesh pocket and a elastic strap to keep your HDD in place. No worry about a mass of gadgets.
Check Stock

GODSHARK 2.5' Inch IDE to SATA Adapter, Convert Laptop 44 Pin Male IDE PATA HDD Hard Disk Drive SSD to a Serial ATA Port

  • Low Profile Half-Heigh mSATA SSD to 2.5 inch IDE 44pin Hard Disk Case Enclosure for Notebook Laptop.
  • 50mm (1.8 inches) MSATA SSD to 2.5 inches Notebook IDE Adapter with case..
  • This adapter using JM20330 Serial ATA Bridge Chip..
Check Stock

Xiwai Combo M.2 NGFF B-Key & mSATA SSD to SATA 3.0 Adapter Converter Case Enclosure with Switch

  • 2 in 1 Combo M.2 NGFF B-key & mSATA SSD to SATA 3.0 Adapter Converter Case Enclosure.
  • the MSATA and NGFF SSD cannot work at same time. You need use the switch to convert it..
  • The adapter only work for B-key or B/M-key socket NGFF SSD, cannot work for M-key socket..
  • Insert both M.2 & mSATA SSD on the PCBA,M.2/NGFF SSD is the first priority. mSATA won't work..
  • Support SATA Reversion 3.2 Support DC 3.3v MSATA/NGFF SSD..
Check Stock

StarTech.com USB 3.0 Hard Drive Eraser Dock & IDE Hard Drive Adaptor

  • THE STARTECH.COM ADVANTAGE: StarTech.com offers a 2-year warranty and free lifetime technical support on this hot-swappable HDD eraser and has been....
  • PLUG & PLAY: This standalone hard drive eraser dock lets you erase a 2.5" or 3.5" SATA hard drive or solid-state drive, without having to connect to a....
  • SECURELY WIPE SATA DRIVES: This business grade external USB 3.0 (USB 3.1 Gen 1) hard drive eraser supports nine erase modes, and can erase IDE, mSATA....
  • Unique design allows any 2.5/3.5in IDE hard drive to be used and inserted (upright) into a SATA HDD docking station or duplicator drive bay.
  • Backed by a StarTech 2-year warranty and free lifetime technical support.
Check Stock

CableCC 2 in 1 Combo M.2 NGFF B-key & mSATA SSD to SATA 3.0 Adapter Converter Case Enclosure

  • 2 in 1 Combo M.2 NGFF B-key & mSATA SSD to SATA 3.0 Adapter Converter Case Enclosure.
  • the MSATA and NGFF SSD cannot work at same time..
  • The adapter only work for B-key or B/M-key socket NGFF SSD, cannot work for M-key socket..
  • Insert both M.2 & mSATA SSD on the PCBA,M.2/NGFF SSD is the first priority. mSATA won't work..
Check Stock