Reviews Mounting Plates

Bed Claw #10 Hook Plates for Wooden Beds Set of 4

  • This hook plate is intended as a replacement for hook plates which have been damaged or for new bed construction where hook plate installation is....
  • These hook plates are made with 13 Gauge steel and are the standard configuration for most American-Made beds..
  • Please measure the distance from the two pins in your headboard/footboard to confirm that they are 2" apart on center to determine if this hook plate....
  • The mounting holes for the pins are 11/32" in diameter. Eight Mounting Pins are included with this item..
  • Packaged as a set of 4 hook plates with mounting pins. Plates are nickel plated to resist rust and corrosion over time..
Check Stock

Driveway Mirror 18\ Security Mirrors Outdoor, Blind Spot Convex Mirror with Adjustable Fixing Bracket, Wide Angle Clear View For Garage Home Parking Factory Office By Hydencamm

  • ...ILITY: Each plastic convex mirror is designed with a rounded parabola design to capture 130-degree field vision for maximum visibility of crossroads, intersections, store layouts, and other difficult to monitor areas.
  • Due to curved design, objects will appear further away or smaller than they are.
  • INDOOR AND OUTDOOR MOUNTING OPTIONS: Easily mount this convex traffic mirror to a 2-inch (5.1 cm) pole (not included) with the included mounting plates and hardware.
  • First use the nuts and bolts to attach the adjustable flat plates to the store security mirror, then sandwich the flat plates and the pole between the pole mounting plates and secure.
  • BUILT TO LAST: Constructed of a durable and flexible plastic, the reflective traffic mirror is resistant to weather, scratches and shattering.
  • The mirror is protected by a thick ABS plastic backing that will also catch rain and snow to keep the mirror clean.
  • After installation, remove plastic film for a bright, high quality, clear image.
  • CONTENTS: This 23 Inch (600mm) large convex safety mirrors set contains (1) large parabola see all mirror with orange plastic housing, (2) pole mounting plates, (2) flat attachment plates, and mounting hardware.
Check Stock

LUSATA Wooden Bed to Catch Hook Plates Bed Rail Brackets Hook Plates,Firmly Grasp Intended Replacement for Bed Set of 4

  • #10 Bed Rail Hook Plates are intended as a replacement for hook plates which have been damaged or for new bed construction where hook plate installation is desired..
  • The hook plates are made with 13 Gauge steel and are the standard configuration for most American-Made beds. Plates are nickel plated to resist rust and corrosion over time..
  • Please measure the distance from the two pins in your headboard/footboard to confirm that they are 2" apart on center to determine if this hook plate will work in your application..
  • The mounting holes for the pins are 11/32" in diameter. 8 Mounting Pins are included with this item. Wood Bed Rail Hook Plates with pins for Wooden Bed, Wooden Headboard, Footboard Frame..
  • Please refer to our second picture for the detailed size data. Packing included: 4 heavy duty hook plates and 8 Mounting Pins..
Check Stock

Lesnala 4-Piece Bed Railing Bracket Used to Connect Wood, Bed Replacement Parts, Headboard and Footboard Fixing Fittings Wooden Bed Frame Used to Connect Headboards Footboards (Screws Included)

  • Packaged:set of 4.Hook plates with mounting pins. Plates are nickel plated to resist rust and corrosion over time..
  • These hook plates are made with 13 Gauge steel and are the standard configuration for most American-Made beds..
  • This hook plate is intended as a replacement for hook plates which have been damaged or for new bed construction where hook plate installation is desired..
  • Please measure the distance from the two pins in your headboard/footboard to confirm that they are 2" apart on center to determine if this hook plate will work in your application..
  • The mounting holes for the pins are 11/32" in diameter. Eight Mounting Pins are included with this item.#10 Wooden Bed Rail Hook Plates,Set of 4,Bed Hooks with pins for Wooden Bed,Wooden Headboard,Footboard Frame,Claw it On intended replacement for Bed Hook #10 Plates,or for new bed constructions.
Check Stock

Arlington LV2-1CS Low Voltage Mounting Bracket, 2-Gang, 1-Pack

  • Adjusts to fit 1/4 Inch to 1 Inch thick wall board, paneling or drywall.
  • mounting brackets offer specially designed screw holes, for a better looking, easy to install job.
  • Adjusts to fit 1/4-Inch to 1-Inch thick wall board, paneling or drywall.
  • Mounting brackets offer specially designed screw holes that deliver a better looking, easy to install job.
Check Stock

OhLectric Recessed LED Light Plate - Slim Light Kit Bracket - New Construction Light Mounting Plate with Notches - Steel, Pack of 6 (26\ Rough-in Plate for 6\ Recessed LED) - OL-48065

  • RECESSED PLATE SET: Made from top quality galvanised steel material, our led light mounting plate ensures that they are durable through wear and tear. The slots allocated on the plate come with alignment notches in a way to allow easy mounting of the LED light wherever you want..
  • SUITABLE FOR NEW CONSTRUCTION: These plates are the perfect accessory to have whenever you are installing lights in a newly constructed building! The rough in plate light mount comes in a variety of choices for the recessed holes from 2 inches to 8 inches which you can choose depending on the lighting need..
  • MODERN FEATURES: The galvanised steel used in the making of the plates make it lightweight and less likely for rust formation. Use these plates for planning your lighting layout prior to hanging drywall, they will hold the precise spot in the ceiling where the light fixture will be mounted..
  • EASY INSTALLATION: The recessed light plate has mounting holes and tracks that make our mounting plate perfectly fit in different types of structure layouts. Alignment notches on the plate will help align multiple plates. Fix the plates with screws(not included) through the mounting slots..
  • VERSATILE APPLICATIONS: They are ideal for all types of construction projects from resid....
Check Stock

iMBAPrice Low Voltage 1 Gang Mounting Bracket for Banana Wall Plate (5 Pack)

  • 1 Gang Low Voltage Wall Plate, can be installed vertically or horizontally.
  • Horizontal or vertical mounting, installs faster and costs less than metal brackets, UL Listed Designed to mount wall plates flush.
  • Mounting bracket has Oval holes that allow final shifting and straightening.
  • Bracket is its own template for cut-out, trace the bracket then cut the hole.
  • Compatible to most 1-Gang wall plate such as banana wall plates, keystone jack wall plates, HDMI wall plates and more.
Check Stock

OHLECTRIC New Construction Rough-in Plate for Led Downlight - Slim Steel Plate/Bracket - Use As A Guide for Drywaller to Install LED Fixture - Used with 6\ Model - Pack of 48 - OL-31359

  • RECESSED PLATE SET: Made from top-quality galvanized steel material, our led light mounting plate ensures that they are durable through wear and tear. The slots allocated on the plate come with alignment notches in a way to allow easy mounting of the LED light wherever you want.
  • SUITABLE FOR NEW CONSTRUCTION: These plates are the perfect accessory to have whenever you are installing lights in a newly constructed building! The rough-in plate light mount comes in a variety of choices for the recessed holes from 2 inches to 8 inches which you can choose depending on the lighting need.
  • MODERN FEATURES: The galvanized steel used in the making of the plates makes it lightweight and less likely for rust formation. Use these plates for planning your lighting layout before hanging drywall, they will hold the precise spot in the ceiling where the light fixture will be mounted.
  • EASY INSTALLATION: The recessed light plate has mounting holes and tracks that make our mounting plate perfectly fit in different types of structure layouts. Alignment notches on the plate will help align multiple plates. Fix the plates with screws(not included) through the mounting slots.
  • VERSATILE APPLICATIONS: They are ideal for all types of construction projects from residentia....
Check Stock

PAGOW 2Pcs #10 Hook Plates, Universal Bed Rail Hook Plates Frame Bracket Headboard Footboard with Pin Replacement Wooden Bed Parts or New Bed Constructions

  • Fonction : #10 wood Bed Rail Hook Plates are intended as a bed replacement parts for hook plates which have been damaged or for new bed construction where bed frame hooks installation is desired..
  • Material : The hook plates are made with 13 Gauge Steel and are the standard configuration for most American-Made beds. Plates are White Zinc plated to resist rust and corrosion over time..
  • Package : Includes 2 pieces of premium #10 heavy duty hook plates & 8 pieces of mounting pins for the 11/32" diameter mounting holes on the hook plates..
  • Dimention : Please refer to our dimention picture for the detailed size data. Measure the distance from the two pins in your headboard/footboard to confirm that hook plate will work in your application..
  • Applications : Suitable for new bed construction that requires hook plates and replacement for damaged hook plates. Wood Bed Rail Hook Plates with pins for Wooden Bed, Wooden Headboard, Footboard Frame..
Check Stock

QLLY 28 inch Adjustable Metal Desk Legs, Office Table Furniture Leg Set, Set of 4 (Black)

  • SIZE: Height: 28 inches/72cm (with mounting plate), screw mechanism on the bottom can adjust about 1 inch/2.5cm, mounting plate is about 0.4 inch/1cm height. Diameter:2 inches/5cm. Weight: 1.87LB/0.85KG (One Leg)..
  • NOTE: Some threads of the table legs are not perfectly vertical. You need to screw hard so that mounting plates can give the threads some pressure to make them vertical. OR try different table legs and mounting plates combination. If they don't work, please contact us for free replacement..
  • MATERIAL: These Furniture legs are made of Strong Metal, they are Heavy Duty. One single Leg holds up to 220 lbs. Its Surface is treated by electrostatical spray and is odorless and eco-friendly..
  • PACKAGE: 4 x Desk Legs, 20 x Screws, 4 x Mounting Plates（Wood board not included）. If you find that the product is damaged or missing parts, please contact us for free replacement. (Don't contact Amazon, they will mess things up.).
  • APPLICATION SCENARIO: Great for tables, desks, counter tops, kitchen tables. Easy to install..
Check Stock

PanaVise 110120B 20 lb. Speaker Mount

  • Double knuckle design for twice the adjustability.
  • Two adjusting points offer a full range of motion:210° Tilt, 360° Turn & 360° Rotation.
  • Cast aluminum surface mounting plates include an extra hole for routing speaker wire up to 8mm thick.
  • Plastic coated, steel safety cable and mounting hardware included.
  • Mounting plates are 2.25"x 3.25" (57.1mm x 82.5mm).
Check Stock

2 PCS Universal Wood Bed Rail Hook Plates for Beds Frame Bracket Headboard Footboard with Pin Replacement Wooden Bed Parts or New Bed Constructions

  • Function：This hook plate is intended as a replacement for hook plates which have been damaged or for new bed.
  • Versatile：7 Hole Design Ensures Compatibility for ALL Wood Bed Rails，and it is the standard configuration for most American-Made beds..
  • The mounting holes for the pins are 11/32" in diameter，the two pins in your headboard/footboard to confirm that they are 2" apart on center . Tips:Please measure the distance to make sure it can match..
  • Material：Thickening galvanized plates can resist rust and corrosion..
  • Packing included：one item includes two hook plates and four mounting pins.
  • another one item includes four hook plates and eight mounting pins.
Check Stock

POROHOM 4 PCS Universal Wood Bed Rail Hook Plates for Beds Frame Bracket Headboard Footboard with Pin Replacement Wooden Bed Parts or New Bed Constructions

  • Function：This hook plate is intended as a replacement for hook plates which have been damaged or for new bed.
  • Versatile：7 Hole Design Ensures Compatibility for ALL Wood Bed Rails，and it is the standard configuration for most American-Made beds..
  • The mounting holes for the pins are 11/32" in diameter，the two pins in your headboard/footboard to confirm that they are 2" apart on center . Tips:Please measure the distance to make sure it can match..
  • Material：Thickening galvanized plates can resist rust and corrosion..
  • Packing included：one item includes 4 hook plates and 8 mounting pins.
  • another one item includes four hook plates and eight mounting pins.
Check Stock