Reviews Mounted Wheels- BestItemr.com

Wald W10252 Bicycle Training Wheels (16 to 20-Inch Wheels.75 and 1-Inch Frame Tubes)

For SINGLE SPEED BIKES: Features 5 1/2" diameter plated steel wheels with rubber tires. Intended for use by riders weighing up to 100 pounds..
The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes.
The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used..
Easy to install. To fit properly there must be at least 3/8" of axle outside the axle nut on both sides of the rear wheel..
Wald training wheels are designed exclusively for single-speed bicycles, not designed for multi-speed bicycles..

What You Get: 10 PCS wire pen brush, 10 PCS wire cup brush, 10 PCS wire wheel brush, 30 PCS abrasive wheel (#120 #180 #320 #400 #800, 5 for each). 10 PCS wool felt mounted mandrels, 5 PCS flap wheels. All wheels are in 1/8"(3mm) shank..
Various Size and Grits: SUNJOYCO buffing wheels kit for die grinder includes various buffing polishing wheels and mounted points that are made of brass, abrasives scouring pad, and wool felt, ideal for blending deburring of smaller workpieces. The variety of wheel sizes helps operators effectively finish various parts..
Wide Applications: Fit for your polishing need, used for polishing all types of metal and jewelry and non-metallic materials in small areas of rust deburring and surface polishing. Works well in deburring, grinding, sanding, deburring, and stripping. All buffing wheels are in 1/8"(3 mm）shank， which could fit with most Dremel rotary tools and die grinders..
High Quality: These polishing and buffing wheels set are made of high-quality industrial brass, Abrasives and wool felt for maximum polishing performance and superior buffing life. The buffing wheels come permanently fastened to a metal spindle so it can be securely run at high speed with die grinders and rotary tools..

6" Club Car PRECEDENT 6” Heavy Duty Double A-Arm Suspension Lift Kit and 14" Black 'LANCER' wheels with mounted All-Terrain tires, center caps, and lug nuts..
Fits: Club Car Precedent electric and gas models (2004+).
Includes: 6” Heavy Duty Double A-Arm Suspension Lift Kit, (4) 14"x7" Black 'LANCER' Aluminum Alloy Wheels that come mounted with 23"x10"-14" DOT rated All-Terrain tires, Black 'SS' Center Caps, and (16) Black 1/2x20 Lug Nuts. All Lift Kit Hardware, step by step instructions, estimated 1-3 hours installation.

Shank mounted points and grinding wheels are made from durable high grade 60 grit aluminum oxide.
Perfect for grinding, polishing or deburring ferrous metals.
Use with 1/4 inch chuck for high speed drills.
Especially useful where larger wheels will not fit or where small abrasive wheels wear out too quickly.

This Tracer SX5 wheelchair features a lightweight frame with a weight capacity of 300 lbs. The desk length arms are fixed height, flip back, and padded for user comfort. The front casters are 8" solid rubber, and the rear wheels are 24" urethane corded tires providing a smooth ride..
The Tracer SX5 is built to last, offering a carbon steel frame, heavy-duty inner liner to keep the seat and back from stretching, and urethane rear tires mounted on "no flex" wheels. Dual-axle allows for conversion to hemi-height..
Heavy-duty inner liners keep seat and back from stretching..
Attractive, silver vein finish. Urethane rear tires mounted on "no flex" wheels for superior performance..
Dual-embossed upholstery for added reinforcement. 14-gauge cross-braces add durability and strength..
Flip back, Full-length padded armrests provide added comfort, support and aids in transfers by providing a leverage point to push from when standing. Front riggings, such as T94HEP / T94HAP / T94HCP / T93HAP / T93HCP / T94HEP, leg rests and foot rests, are sold separately..

6" Club Car PRECEDENT 6” Heavy Duty Double A-Arm Suspension Lift Kit and 12" Black 'DARKSIDE' wheels with mounted All-Terrain tires, center caps, and lug nuts..
Fits: Club Car Precedent electric and gas models (2004+).
Includes: 6” Heavy Duty Double A-Arm Suspension Lift Kit, (4) 12"x7" Black 'DARKSIDE' Aluminum Alloy Wheels that come mounted with 23"x10.5"-12" All-Terrain tires, Black 'SS' Center Caps, and (16) Black 1/2x20 Lug Nuts. All Lift Kit Hardware, step by step instructions, estimated 1-3 hours installation.

IMPORTANT - Have your installer "TEST FIT" Wheels before mounting tires to endure proper fitment to your vehicle. Once tires are mounted wheels cannot be considered NEW for Return..
Wheels MAY require Aftermarket Lug Nuts and or Hub Rings (not included) for proper fitment..
All images reflect the style & model of the wheel, actual wheels may vary in look based on size, width and offset. (ie. wheel lip & depth).

PATENTED STEERING | Patented steering lock button fixes the steering system of the two front wheels to only move forward & backward.
ADJUSTABLE T-BAR | Anodized colored column with a super wide, 4-height T-bar and easy-to-use clamp for up to 9+.
ROBUST DECK | Wide & super low composite deck in dual-color with a nylon reinforced body frame supports up to 110lbs.
HIGH-QUALITY WHEELS | High-rebound PU casted front & back wheels.
2 x 121mm front wheels, 1 x 80mm rear wheel mounted on ABEC 5 bearings.
INNOVATION | Patented elliptic folding system. Trolley mode compatible.

Traxxas 5864 - SCT Off-Road Tires, SCT Beadlock Wheels, Black/Orange, Front 2WD.
Features: Fits the front of 2WD short course truck Five spoke plastic wheels, Black in color with orange beadlock area.
Includes: (2) Pre-mounted wheels and tires with foam inserts.
Specs: Outer Diameter: 4.3" (109mm) Width: 1.7" (43mm) Wheel Diameter: 2.2" (56mm) Hex Size: 12mm.
Part number(s) included (in factory packaging): 5864.

Shank mounted points and grinding wheels are made from durable high grade aluminum oxide.
Perfect for grinding, polishing or deburring ferrous metals.
Use with 1/4 inch chuck for high speed drills.
Especially useful where larger wheels will not fit or where small abrasive wheels wear out too quickly.