Reviews Motorhome Fittings

C16-08568 20 inch 20 lbs Gas Lift Struts 20 Spring Shocks for Truck Tool Box RV Door Motorhome Entrance Door Compartment Door 2Pcs ARANA

  • ✅ 20 inch 20 Lbs Gas Shocks -- Extended Length A [in]: 19.7(500mm), Compressed Length B [in]: 11.8(300mm), End fittings Diameter: 10mm, Force: 20....
  • ✅ 20" 20 Lbs Gas Struts -- Mostly used on travel trailer door, RV door, motorhome door, compartment door, etc..
  • ✅ 20" 20lbs Gas Lift Shocks -- 2× Shocks and 1× Installation Guide in the package.
  • If you need more installation guide, welcome to message us for....
  • ✅ 20inch 20 Pound Gas Props -- If you want to use them on home-built storage boxes, please search B08B3XLF9M for matched mounting brackets.
  • ✅100% Satisfaction Service -- New package will be arranged during 18 months using course if there are any product problems.
Check Stock

MICTUNING RV Winterize Blowout Adapter Kit - 1/4 Male Quick Connect Plug & 3/4

  • Prevent Freezing of Water Line – This winterize blowout adapter kit helps to winterize garden hose, sprinkler systems, faucets, by blowing out water from the water lines/plumbing. It is an environmental friendly winterization way, which greatly reduce the chance of using antifreeze.
  • Trusted Quality – The fittings made of lead-free brass which contain less than 0.25% lead, care for your health and safety. It is not easy to break or deform, ensure long-lasting service time.
  • Wide Range of Uses – A quick and easy way to blow out the water lines of your RV, motorhome, camper, boat, and travel trailer, sprinkler systems, outdoor plumbing, garden hoses and more.
  • Easy Operation – Comes with a 3/4 Inch Female Garden Hose Threading for you to connect the gardening pipe. Besides, two black washers included to prevent leakage between the water tube and water tap.
  • Standard Threaded Connection – With a 1/4 inch male air compressor quick plug to a male 3/4 inch garden hose inner thread, easy attach air line to water lines or hose system. You can rotate around the Air Flow Regulation Ball Vale to open or close and adjust the air flow rate.
Check Stock

C16-08568 20 inch 20 lbs Gas Lift Struts 20 Spring Shocks for Truck Tool Box RV Door&Packe of 4pcs 10 mm Ball Stud Mounting Brackets L-type

  • 20 inch 20 Lbs Gas Shocks -- Extended Length A [in]: 19.7(500mm), Compressed Length B [in]: 11.8(300mm), End fittings Diameter: 10mm, Force: 20 lbs....
  • 20" 20 Lbs Gas Struts -- Mostly used on travel trailer door, RV door, motorhome door, compartment door, etc..
  • 20" 20lbs Gas Lift Shocks -- 2× Shocks, 4× Ball Studs, 1× Installation Guide in the package.
  • If you need more installation guide, welcome to....
  • 20inch 20 Pound Gas Props -- If you want to use them on home-built storage boxes, please search B08B3XLF9M for matched mounting brackets.
  • 100% Satisfaction Service -- New package will be arranged during 18 months using course if there are any product problems.
Check Stock

WEST ORGIN 300-1406 RV Entry Step Motor Compatible with RV Coach Toyhauler Replacement for Part Number 369506 1820124 SP-1636669 SP-163669

  • 1. Replacement for part numbers: 1820124, 369506, SP-163669, SP-1636669.
  • 2. Compatible with RV, Coach, Motorhome, Toyhauler and Step Motor.
  • 3. Function: The pedal automatically extends when the motorhome door is opened, and the pedal automatically retracts when the motorhome door is closed.
  • 4. Notice: Please check the gear height before buying, the number of gears is 9.
  • 5. Please confirm whether your model is suitable before buying.
Check Stock

Adco Deluxe RV Wheel Covers Trailer Wheel Covers Motorhome Wheel Storage Covers for Wheels 36\-39\ in Diameter (4 Pack with Storage Case)

  • 4 Pack of Tire Covers designed for Tire Diameter from 36 Inches to 39 Inches (Designed for Motorhome Chassis with Tires: 255 / 70R).
  • Adco Tyre Gard Wheel Covers are the best way to protect your RV, motorhome, Trailer wheels from sun and weather exposure.
  • Secures snug with vinyl strap and hook and loop fastener to prevent loss due to windy conditions.
  • Key Features Include: Overlapping Seams, Double Needle Stitching and Reinforced Grommets.
Check Stock

Demco 9523064 12\ Safety Cable Extensions, (Set of 2)

  • Slides over your tow bar's stinger or ball mount to convert the rear of your motorhome into a storage area for your Guardian rock shield.
  • A center cut out allows for quick and easy access to most motorhome electrical components.
  • Has a drop down collar with a pull pin design that allows you to remove the Stowaway for access to the rear diesel compartment.
Check Stock

Roadmaster 520 Falcon 2 Tow Bar - 6000 Pound Capacity

  • 8,000 pound weight capacity motorhome mounted tow bar using a 2" receiver.
  • One person can easily connect or disconnect the Sterling All-Terrain in seconds.
  • Telescoping, independently-adjustable inner arms are easy to maneuver into position. Simply pin them in place and then drive your motorhome away and the arms automatically center and lock in place.
  • Solid stainless steel inner arms for smooth, trouble-free operation and easy maintenance.
  • Weighs 35 pounds and includes safety cables and a 6-wire power cord with one wire plug and one 7-wire plug. Crossbar not included.
Check Stock

Universal Motorhome Straight Ladder Exterior RV

  • Can be located on the rear of any RV, straight or contoured. Precision designed to match your vehicle’s body lines.
  • Solid all-welded construction for maximum strength and safety. High quality aluminum constructions,motorhome straight ladder come prepped with oxidation. Rust protection. Built to strict quality control standards.
  • Non-slip, wide steps. To keep the recommended 12’’ spacing between treads, RV exterior ladder should be trimmed to 92.5″.
  • All screws connecting the ladder to the motorhome must be fastened to the RV’s sub frame or backing. No cutting and no drilling..
  • Finish: Oxidation. Instruction is included..
Check Stock

MUNTE - SS304 Stainless Steel Female Threaded 3 Way Tee T Pipe Fitting 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" BSP Threaded (1")

  • Pipe Fittings and Tools include: Pipe fittings,copper pipe fittings, black iron pipe fittings, water pipe fittings, stainless steel pipe fittings, cpvc pipe fittings, iron pipe fittings, ABS pipe fittings, RV pipe fittings, Pipe fitting tools, PVC pipe fittings, PE pipe fittings..
  • Metal pipe fittings, Stainless steel pipe fittings, Socket, Female socket, Male socket, Wye, Tee 90, Elbow 90, Elbow 45, Reduced valve, Female elbow 90, Male elbow 90, Reduced tee, Reduced bush, cleanout, End Cap, PVC solvent cement, Clamp saddled, Flange, Steel backing ring, Adaptor, P trap with cleanout plug, Gasket, Valve.
  • Products are well manufactured, durable and have a long life, easy to disassemble and move during use..
  • Excellent quality, fast delivery, good after-sales. We promise to do everything in our power for you to be 100% satisfied.
Check Stock

Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2

  • Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
  • Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
  • Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
  • Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.
Check Stock

RV T Level, T Level Bubble, Levels Measuring Layout Tools Level Cross Check Level Instrument with Installation Hole Measuring Tool for Camera, Spirit Level Bubble Level (Black)(Black)

  • With 8 Pieces Screws Together! Each T-level has 2 small mounting holes in a plastic casing. Package 4 Piece levels come with 8 pieces small screws together for mounting, quick and convenient installation..
  • RV T level tool with screws mounting, cross check bubble level for rv, motorhome, trailers, Camping, tripods, furniture, machines, pictures hanging, appliances, leveling your rv, for front-to-back and side-to-side leveling..
  • The small size bubble T-level can be permanently mounted to various places in rv trailer motorhome or furniture home setting also workshop machines so that you can always verify if it is still level (Note: when mounting with screws, don’t screw too tight as to warp the level body.).
  • Multi-purpose, cross check, 2-directional level can level both vertical and horizontal surfaces. Each T-level has 2 fluorescent yellow-green acrylic bubble for easy using and accurate readings..
  • This T level is useful to attach to ping pong tables and pool tables for accurate level play. These T Bubble Level can be used for leveling RV or items in your rv trailers, and level many things in rv motorhome, such as level rv refrigerator, help trailers or camper to check for the levelness. T-type bubble spirit level also used for leveling machine, workshop....
Check Stock

Bimini Top 3-Bow/4-Bow Stainless Steel Boat Jaw Slide Cap Eye End Deck Hinge Fittings Hardware 16 Set 1 Inch

  • 4 BOW and 1'', Round Tube Bimini Top Kit with Stainless Steel Fittings.
  • 8 x Eye End Fittings - Fit 1"； 6 x Jaw Slide Fittings - Fit 1''； 2 x Deck Hinge Fittings.
  • Package : 16 Pieces in 1 Set, (WHAT YOU GET:8 x Eye End Fittings - Fit 1"； 6 x Jaw Slide Fittings - Fit 1''； 2 x Deck Hinge Fittings).
Check Stock

ABN Grease Fitting Tool - 4 Way Grease Fittings Tool Easy Out Zerk Fitting Tool for Damaged Grease Zerks and Fittings

  • SERVICE YOUR VEHICLE: Use the ABN 4-Way Grease Fitting Kit to install, remove, repair, and maintain zerk fittings in your vehicle, lawnmower, and other tools that use grease fittings.
  • This grease zerk tool kit even helps you remove damaged or broken grease fitting tabs.
  • 4 TOOLS IN ONE: Re-tap holes, install and remove fittings, and remove broken fittings with this four in one grease fitting removal tool.
  • Slotted grease fitting installation tool works with any straight, pin-type, or angled zerk including 30, 45, 65, and 90-degree angles.
  • FITS YOUR ZERK GREASE FITTINGS: Grease nozzle fitting greasing tool is suitable for 1/4 inch-28 and 6MM fittings, 1/4"-28 tap thread repairs, and 5/16-inch (7mm) and 3/8-inch (9mm) hex fitting and plug removals.
  • BUILT TO LAST: Constructed of heavy-duty metal ensures maximum strength and longevity.
  • 2-inch (5.1cm) T-design and a knurled body provides secure grip so you can install, rethread, or remove fittings easily.
  • EASY TO USE: Air grease gun accessories designed to clean out the threads of clogged fittings.
  • Grease zerk extractor grease fitting multi-tool features a built-in re-threader and extractor to help you remove worn and broken zerks and fittings.
Check Stock