Reviews Motorcycle Jack Stand

CPROSP Scissor Jack 2 Tons(4,409 lbs) Capacity with Ratchet Handle Effort Saving

  • ADJUSTABLE HEIGHT: The height of the motorcycle lift jack can be adjusted to meet your specific needs. And its minimum height is about 6.7” (saddles installed) and its maximum height is about 15.75”..
  • 1100LBS WEIGHT CAPACITY: With main frame made of steel, the motorcycle lift stand can support up to 1100lbs. And its own weight is about 14kg/30.9lbs..
  • SAFETY PIN FOR EXTRA SECURITY: The motorcycle lift jack is designed with a safety pin which can reduce the possibility of falling down during use and provide extra safety..
  • ADJUSTABLE SUPPORT SADDLES: The position of the support saddles can be adjusted horizontally by loosing and tightening screws on them. You can adjust the support saddles based on your needs..
  • SIMPLE OPERATION: To use the item, just install the support saddles, attach the handle to to lift stand and then rotate it to adjust the height to your desired height. ( It is suggested to wear gloves when operation.).
Check Stock

RUTU Hydraulic Motorcycle Lift Stand – Heavy-Duty Steel Maintenance Hoist Jack for Dirt Bike, Snowmobile - Motorcycle Stand Lift with 440Lbs Capacity - Motorbike Repair Accessories Tools

  • Versatile Garage Equipment - This motorbike lift has 2 height levels: minimum platform height 11.6 in. (295mm)/maximum (raised) platform height 15.15 in (385mm). Ideal for motorbikes with11.81 in. –13.78 in. (300mm-350mm)bottom frame / engine- ground clearance. Please measure the minimum ground clearance of your motorcycle before purchasing, to avoid the stand's minimum height being too high and unable to use..
  • Sturdy Construction, Utilitarian Design - This motorcycle jack stand features a reinforced welded steel frame for added strength and stability. The hydraulic pump operates smoothly, and a built-in damper makes lowering your bike safer and easier. Nylon stabilizing bushing reduces the gap between the steel frame, preventing wobble after raising your motorcycle..
  • Anti-slip Nitrile Surface& Weight Capacity - The motorcycle stand has a durable rubber pad and scratch-proof work surface that protects bikes from slipping, and scratches that cause rust, the non-slip platform measures 11 1/32 x 7 7/8 In. (280x200mm), 8 round head rivets fasten the rubber pad tightly. It has a maximum load capacity of 440 lbs (200 KG).This also makes it suitable for ATV....
Check Stock

Venom Motorcycle Stand Lift Front Rear Combo Lift Stand, Front Wheel Fork Stand Rear Wheel Swingarm Paddle Lift Stand, Universal Fit, Compatible With Most Yamaha Honda Kawasaki Suzuki BMW Motorcycles

  • [STABLE & DURABLE] – Our Professionally Designed Dual Combo Motorcycle Lift Stands Are Made With a Specialized Heavy Duty Weld That Provides Maximum Stability. The Superior Enhanced Robust Steel Construction Adds Additional Durability to the Already Strong Stands. The Triangular Shaped Crossbar and Four Caster Wheels on Each Stand Increase Balance and Support. The Front Motorcycle Stand Lift Cradle is Cushioned With Rubber Padding to Avoid Abrasions and Scuffs to Your Front Wheel Forks..
  • [ADJUSTABLE UNIVERSAL FITMENT] – By Adjusting the Brackets, This Lift Stand Can Be Made to Fit Virtually Any Bike or Motorcycle. The Adjustable Bracket for the Front Stand Can Be Adjusted From 7.5″ to 10.5″. The Rear Stand Can Be Adjusted From 11″ to 13″. With a Combined Weight Capacity of Over 850lbs, Our Adjustable Stand is One of the Strongest Motorcycle Stands Out There and Can Bear the Weight of Most Motorcycles..
  • [EASY TO USE & LIFT] – The Motorcycle Stand is Not Just Strong, Robust and Durable, It is Also Extremely Easy to Use. Assemble, Set-up and Lift Your Motorcycle in Under 5 Minutes! Our Perfectly Engineered Stand Works as a Force Multiplier That Has Been Designed to Lift Your Bike With Little to No Effort. The Elongated Handle Aids the Ease o....
Check Stock

Venom Motorcycle Stand Lift Front Rear Combo Stand Lift Stand, Front Wheel Fork Stand Rear Wheel Swingarm Spool Stand, Universal Fit, Compatible With Most Yamaha Honda Kawasaki Suzuki BMW Motorcycles

  • [STABLE & DURABLE] – Our Professionally Designed Combo Motorcycle Lift Stands Are Made With A Specialized Heavy Duty Weld That Provides Maximum Stability. The Superior Enhanced Robust Steel Construction Adds Additional Durability To The Already Sturdy Stands. The Triangular Shaped Crossbar And Four Caster Wheels On Each Stand Increase Balance And Support. The Motorcycle Stand Lift Cradle Is Cushioned With Rubber Padding To Avoid Abrasions And Scuffs To Your Front Wheel Forks and Rear Swingarm..
  • [ADJUSTABLE UNIVERSAL FITMENT] – By Adjusting The Brackets, This Lift Stand Can Be Made To Fit Virtually Any Bike Or Motorcycle. The Adjustable Bracket For The Front Stand Can Be Adjusted From 7.5″ To 10.5″. The Rear Stand Can Be Adjusted From 10″ To 14.5″. With A Combined Weight Capacity Of Over 850lbs, Our Adjustable Stand Is One Of The Strongest Motorcycle Stands Out There And Can Bear The Weight Of Most Motorcycles..
  • [EASY TO USE & LIFT] – The Motorcycle Stand is Not Just Strong, Robust and Durable, It is Also Extremely Easy to Use. Assemble, Set-up and Lift Your Motorcycle in Under 5 Minutes! Our Perfectly Engineered Stand Works as a Force Multiplier That Has Been Designed to Lift Your Bike With Little to No Effort. The Elongated Handle Aids t....
Check Stock

VIVOHOME Steel Motorcycle ATV Wide Deck Scissor Lift Jack Crank Hoist Stand 1100 lbs

  • NICE APPEARANCE & HIGH QUALITY - The heavy-duty and solid steel structure of this VIVOHOME motorcycle lift jack comes with a red and black....
  • ANTI-SLIP DESIGN - The stand’s top surface has a durable rubber pad with striped veins to help prevent slippage and scratches.
  • MULTIPLE APPLICATIONS - Most motorcycle models including cruisers, trikes, Can-Am Spyders, ATVs, UTVs, dirt bikes, snowmobiles, etc. can fit on this....
  • EASY TO OPERATE - Features a crank handle to make operation easier and you only need to rotate the metal handle to lift your motorcycle, which is an....
  • HIGH PERFORMANCE - With a max load capacity of 1100 lbs., the lift jack can raise the motorcycle to a most comfortable level for your work between....
Check Stock

XtremepowerUS 96061 300LBS Dirt ATV Motorcycle Bike Scissor Jack Hoist Mini Crank Hydraulic Foot Operated Lift, Red

  • Easy to use foot pedal operation for raising and lowering, compared with the traditional lifting method, it is more labor-saving. As well as include all hardware to mount bike to stand securely.
  • Lifting up to 300 lbs, the hydraulic scissor floor jack is perfect for tinkering on your dirt bike or small motorcycle.
  • Lift height from 13-1/2 inches (min height) to 36 inches (max height), the lift table eliminates the need to stoop or kneel while working on your motorcycle.
  • Wide top platform provides a safe, stable surface for your motorcycle while using the jack. The rubber padding prevents any metal on metal contact, protecting your ride from scratching, scuffing and scraping.
  • Lift table comes with non-slip hard rubber (gum) plate with strong locking springs to insure safe and sturdy stand. As well as when the platform has been raised to the working height, ensure the locking bar is engaged to prevent accidental lowering.
Check Stock

VIVOHOME Steel Motorcycle ATV Scissor Lift Jack Crank Hoist Stand with Saddle and Safety Pins 1100 lbs

  • NICE APPEARANCE & HIGH QUALITY - The heavy-duty and solid steel structure of this VIVOHOME motorcycle lift jack comes with a red and black....
  • ADJUSTABLE & SAFE DESIGN - The stand’s top surface has a durable rubber pad with striped veins to help prevent slippage and scratches.
  • MULTIPLE APPLICATIONS - Most motorcycle models including cruisers, trikes, Can-Am Spyders, ATVs, UTVs, dirt bikes, snowmobiles, etc. can fit on this....
  • HIGH PERFORMANCE - With a max load capacity of 1100 lbs., the lift jack can raise the motorcycle to a most comfortable level for your work between....
  • EASY TO OPERATE - Features a 12cm/4.7" crank handle to make operation easier and you only need to rotate the metal handle to lift your motorcycle,....
Check Stock

Motorcycle Lift Scissor Jack Center Stand, 4-13 Inch Height Range Motorcycle Jack and Bike Stand, 1100lb Capacity Bike Repair Stand for Motorcycle Maintenance up to 1/2 Ton

  • COMPACT HALF-TON JACK: This powerful little motorcycle lift by Orion Motor Tech easily jacks up and lowers your standard, cruiser, touring, or sport bike up to 1100 pounds with no more assembly required than fitting in the easy-to-use T-handle.
  • HIGHLY STABLE: Our center stand's 15x9 inch platform holds your vehicle firmly thanks to rubber padding that prevents slips or turn-overs.
  • the wide threading on the central shaft also keeps things nice and steady going up or coming down.
  • SLIM-FIT DESIGN: The 3.7-inch minimum height on this compact bike jack slips right under any motorcycle, even those with sunken chassis.
  • the 13.8-inch maximum height still gives you plenty of room for working on your vehicle's undercarriage.
  • RUGGED CONSTRUCTION: Our scissor jack offers long term performance under even punishing use thanks to its heavy-duty steel engineered for large payloads and powder coating for superior corrosion resistance.
  • SATISFACTION GUARANTEED: Orion Motor Tech backs this motorcycle center stand with our usual strong warranty and friendly 24/7 customer service, ensuring that it will serve you well for years to come!.
Check Stock

Pit Posse PP2551 Motorcycle ATV Scissor Floor Jack Lift Table Stand - 13 Inches Thru 36-Inch-High - Stable - Safe - Comfortable - 2 Years Warranty

  • ✅ A PROFESSIONAL LIFT FOR YOUR HOME/GARAGE/SHOP- This hydraulic scissor lifter is designed to allow you to repair your motorcycle, ATV, and dirtbike smoothly. Perfectly centers your bike with both wheels in the air, and you can adjust the height anywhere between 13 inches thru 36 inch off the ground. The top platform is flat and is 13.75 x 16 inch. This lift's capacity is up to 300 pounds..
  • ✅ SAFELY WORK ON YOU BIKE WORRY FREE- This jack stand is heavy duty, made with thick gauge metal and keeps your bike safe. Includes safety loops that will help secure the bike and the heavy-duty steel frame construction and rubber pad make this lifter movement resistant and prevents metal to metal contact that can scratch, scuff and scrape your motorcycle..
  • ✅ EASY TO OPERATE CLEAN WORK ENVIRONMENT- The lift has a foot pedal with a hydraulic lift to make it quick and easy to lift or lower the stand, there is a large oil drain hole in the middle of the platform, and the top is made of rubber that is oil & gas resistant..
  • ✅ DESIGNED FOR COMFORTABLE USE AND STORAGE- The scissor jack stand is sufficient to hold the bike's tires off the ground to store in the winter. The lift table eliminates the need to stoop or kneel while working on your motorcycle, giving ....
Check Stock

CPROSP Scissor Jack Car for /SUV /MPV max 2 Tons(4,409 lbs) Capacity with Hand Crank Trolley Lifter with Ratchet

  • ✅ A PROFESSIONAL LIFT FOR YOUR HOME/GARAGE/SHOP- This hydraulic scissor lifter is designed to allow you to repair your motorcycle, ATV, and dirtbike smoothly. Perfectly centers your bike with both wheels in the air, and you can adjust the height anywhere between 13 inches thru 36 inch off the ground. The top platform is flat and is 13.75 x 16 inch. This lift's capacity is up to 300 pounds..
  • ✅ SAFELY WORK ON YOU BIKE WORRY FREE- This jack stand is heavy duty, made with thick gauge metal and keeps your bike safe. Includes safety loops that will help secure the bike and the heavy-duty steel frame construction and rubber pad make this lifter movement resistant and prevents metal to metal contact that can scratch, scuff and scrape your motorcycle..
  • ✅ EASY TO OPERATE CLEAN WORK ENVIRONMENT- The lift has a foot pedal with a hydraulic lift to make it quick and easy to lift or lower the stand, there is a large oil drain hole in the middle of the platform, and the top is made of rubber that is oil & gas resistant. The lift comes with locking caster wheels that make it much easier to move your bike around when working on different angles..
  • ✅ DESIGNED FOR COMFORTABLE USE AND STORAGE- The scissor jack stand is sufficient to hold the bike's tires off the....
Check Stock

VEVOR Motorcycle Dirt Bike Lift Stand, 400 Lbs Heavy Duty Motorcycle Lift Repair Stand, 9.0'-16.5' Adjustable Steel Lift Stand Dirt Bike Maintenance Table Rack, Black/Blue Jack Hoist Height Lift Stand

  • Unbeatable Construction: The thickened high-grade steel frame with a rust-resistant powder coating creates a superior sturdy and robust platform for your motorcycles during maintenance or storage. Our dirt bike lift stand reaches a maximum lifting weight of 400 lbs / 181 kg..
  • Height Adjustable & Flexible: The deck's height is fully adjustable and the top plate can swivel to reach all areas, allowing for easy and controlled lifting of your off-road motorcycle. The flexible range of our motorcycle lift repair stand is 9.0-16.5 inches / 23-42 cm..
  • Labor-Saving Design: This motorcycle lift stand is designed with a large lever to help lift heavy-load motorbikes with ease, no suffering from pinched fingers or strained shoulders. The deck is also fixed with a lever lock to ensure security when maintaining a raised position..
  • Easy Lift & Descent: The damper shock adopted by our dirt bike jack stand controls motorcycle descent to avoid sudden drops. Widened rotatable top surface helps lift both wheels off the ground to better maintain and repair your bike. Top plate size: 10.8" x 6.5" / 27.5 x 16.5 cm..
  • Stable Structure: With a durable ribbed rubber pad on the top surface, this motorcycle maintenance stand effectively prevents bikes from slippage, rust, and ....
Check Stock

Motorcycle Scissor Lift Jacks 1100lbs Load Capacity Wide Deck Transmission Jacks for Repairing Motorcycle Dirt Bikes ATVS UTVS ,Hoist Stands for Home Garage

  • SOLID CONSTRUCTION - HABUTWAY motorcycle lift jack is made of solid steel which can carry almost all kinds of motorcycles, dirt bikes, ATVS, UTVS. And its red and black powder-coated finish gives our scissor lift a fashion look..
  • ADJUSTABLE HEIGHT - Motorcycle lift jacks can be adjusted to different heights with adjusting screws according to the your specific needs. And its minimum height is about 3.5” and its maximum height is about 14.5”..
  • HIGH-QUALITY APPEARANCE - Wide and flat table surface of the motorcycle stand lift is equipped with non-slip striped rubber, which can prevent wheels from sliding and scratching the solid steel surface during repair. The metal parts are sprayed with red and black painting to prevent oil, dust, rust and facilitate clean up..
  • EASY TO OPERATE - Attached with a free crank, our crank hoist stand is easy to operate. Just rotate the metal sleeve, you can easily lift the motorcycle, It is an excellent helper for motorcycle maintenance, suitable for garages, repair shops, at the track or used as a standing staff lifts..
  • DIMENSIONS & LOAD-BEARING - Lift range: 3.5inches to 14.5inches Platform dimensions: 14.5' x 9''. Weight Capacity: 1100 lbs..
Check Stock

Orion Motor Tech Motorcycle Jack and Stand, Hydraulic Moped and Dirt Bike Lift Stand, Wheeled Motorcycle Scissor Lift Jack for Motocross and Trail Bikes with Chocks, 355lb Cap Motorcycle Lift Stand

  • MOTORCYCLE SCISSOR JACK: This hydraulic lift from Orion Motor Tech offers a 355 pound capacity to easily raise your trail, dirt, and motocross bikes from 1.2 to 3 feet for convenient maintenance and repair work.
  • EASY OPERATION: This motorcycle lift jack sets up quickly—just slot in the pedal and safety bar and you're ready to go.
  • the 4 caster wheels roll smoothly around your garage but lock in place with the 4 provided chocks.
  • the pedal is covered with textured rubber for steady action.
  • and 2 included balancing weights keep everything steady and just where you need it.
  • 16"x13" NONSLIP SURFACE: The table top of this dirt bike lift is spacious, with a textured rubber surface to hold things in place while avoiding any damage to your vehicle.
  • a central hole keeps oil changes simple and mess-free.
  • HEAVY-DUTY CONSTRUCTION: Our dirt bike stand and lift and its parts are constructed from high-carbon structural steel galvanized or powder coated for superior durability, corrosion resistance, and longevity.
  • SERVICE & SUPPORT: Order this motorcycle jack lift today, knowing that its 1-year warranty and Orion Motor Tech's friendly 24/7 customer service are standing by to ensure your complete satisfaction.
Check Stock