Reviews Motor Test System

Phase Sequence Meter, 60V ~ 600V AC 3 Phase Sequence Rotation Tester, with 5 LED Lights, for General Measuring Tool

  • It is durable, reliable and light-weight handheld device, which is necessary tool for those who often install, repair or maintain three-phase system or motor..
  • Used to test phase sequence input of three-phase voltage, to indicate phase line L1, L2 and L3..
  • PM5900 Motor and Phase Rotation Indicator is used to test magnetic field direction of three-phase system, phase rotation, motor rotation direction..
  • Without a need to link testing line, the motor rotation direction can be decided by placing this indicator above the motor and aligning it with motor drive shaft..
  • It also supports non-contact type magnetic field rotation direction test (motor rotation direction test)..
Check Stock

AUTOOL BT-460 Battery Tester Lead-acid AGM GEL Battery Cell Analyzer 4‘’ TFT Colorful Display Auto Battery Testers Car Battery Analyzer Suppor 12V Vehicles & 24V Heavy Duty Trucks

  • Cranking test is mainly to test and analyze the starting motor. Through testing the actual required cranking current and cranking voltage of the starting motor, it can find out whether the starting motor works fine. There are several reasons why the starting motor is abnormal: lubricating system fault causing the starting loaded torque increasing or rotor friction of the starting motor causing the increasing friction of the starting motor itself..
  • Charging test is to check and analyze the charging system, including generator, rectifier, rectifier diode, etc. , thus to find out whether the output voltage of the generator is normal, the rectifier diode works fine and the charging current is normal. Suppose one of the above mentioned parts is not in normal situation, it will lead to over charge or incomplete charge of the battery, thus the battery will be quickly damaged and also greatly shorten the using life of other loaded electrical apply.
Check Stock

Schumacher PST-200 ProSeries Battery Load Tester - 100 Amp - with Complete System Diagnosis , Black

  • COMPATIBILITY: Compatible with 12V battery systems.
  • COMPLETE SYSTEM DIAGNOSIS: Offers a complete system diagnosis and tests load, state of charge, battery condition, and excessive starter motor draw.
  • DIGITAL DISPLAY: Bright digital screen displays voltage and test results.
  • LED INDICATORS: 3-step LED display with polarity test function, battery load test, and charging system test readout.
Check Stock

allsun Automotive Electrical Circuit Tester Probe 2-24V DC Pen Vehicle Power Diagnostic Tool Auto Wire Test Light Device

  • 【CIRCUIT TESTER WIDELY APPLICATION】Automotive Power Electric Circuit Tester EM287 can be used to test continuity, test polarity of a voltage, check lamp, check electric motor, follow and locate short circuits, test for bad ground contacts and measure dc voltage from 2V to 24V etc..
  • 【HAS LONG TEST LEAD】Automotive Test Probe has long test lead. The cable length is about 5m(16ft) which allows you test any electrical system easily..
  • 【OVERLOAD PROTECTION】Automotive Electrical Tools Overload Protection: When the current exceeds 8A, the unit will disconnect the current automatically..
  • 【EASY TO USE】Car Electrical Test Tool, it's easy to use. Battery by the vehicle battery directly. The illumination function enables automotive technician to test the electrical system in the darkness..
  • 【INSUFFINIENT LIGHT ENVIRONMENT】Electrical System Diagnostic Tool takes the insufficient light environment in consider, the tool built in flashlight to indicate the DC voltage measurement..
Check Stock

2023 LAUNCH Upgraded BST360 6V 12V Car Battery Tester, Bluetooth Battery Load Tester Charging Cranking System Analyzer for Android/iPhone/LAUNCH X431, 100-2000 CCA Alternator Tester Voltmeter

  • ... your phone/tablet (LAUNCH X431 Series tablets are suitable) for car battery testing work, which is customer friendly and easy to use..
  • 【Battery & Charging & Cranking Test】With LAUNCH BST360 automotive battery tester, we can check the overall health of the battery, including the cranking test, and run a complete system charging test. The cranking test is to test and analyze the starter motor to check if the starter motor is working properly, and the charging test is to check the state of the charging system to avoid damaging the battery. It is much more convenient than driving a few miles to a nearby auto repair store..
  • 【6V & 12V Battery Monitor】Our Bluetooth car battery tester is compatible with all 6 volt and 12 volt lead-acid batteries include regular flooded, AGM flat plate, AGM spiral, GEL, and EFB batteries with the test range (100-2000 CCA). Compatible with cars, motorcycles, trucks, RVs, ATVs, SUVs, boats, yachts, mowers, and even golf carts..
  • 【Fast & Accurate & Safe】 Launch BST360 is Plug-and-Play, and it provides Accuracy testing reports within seconds, greatly improved the testing speed compared to other battery testers. You won't get a lemon. It also has a polarity reversal protection function. The clip reversal will not damage t....
Check Stock

ANCEL AD410 Enhanced OBD II Vehicle Code Reader with ANCEL BA201 Car 12V 100-2000 CCA Battery Load Tester

  • ...red emission-related codes, pending codes, and shows code definitions. Turns off the MIL (check engine light), helps in resetting the monitor before taking it to Smog, and tells you what is going on before bringing the car in for repair..
  • ENHANCED OBDII DIAGNOSTICS - Supports O2 Sensor and EVAP (Evaporative Control) System Test. AD410 code scanner can be used to initiate a leak test on a vehicle's EVAP system by monitoring the integrity of the fuel tank system. The O2 Sensor Test is designed to monitor and adjust air/fuel mixture, which will help identify and troubleshoot issues related to fuel efficiency and vehicle emission..
  • Aims to analyze battery health status to calculate the actual cold cranking capability and the aging extent. Based on the majority of battery standards, such as CCA, BCI, CA, MCA, JIS, DIN, SAE etc., gets the accurate test result within 1 second..
  • Easy to check the cranking and charging system condition. Cranking test displays cranking time, voltage and status, which helps you test and analyze the starting motor to check it works properly or not. Charging test displays load voltage, unloaded voltage, ripple status, charging system status to avoid damaging the battery and shortening its life greatly due to overcharging or incomple....
Check Stock

ANCEL AD410 PRO with Storage Case 2 in 1 Mechanic OBD2 Scanner Battery Tester Code Reader Scan Tool

  • ...the car battery based on the location of the battery inside the vehicle or outside the vehicle, capacity for analyzing battery health status and quickly provide more accurate test results, displays voltage value, standard CCA, measured CCA, SOH (%), SOC (%), internal resistance and more..
  • 【PERFORM MULTIPLE BATTERY SYSTEMS TESTS】Analyzes the condition of the starter cranking and alternator charging. Cranking Test to test and analyze the starter motor (cranking time, voltage, and status) and Charging Test to test and analyze the charging system (load voltage, unloaded voltage, charging system status)..
  • 【POWERFUL APPLICATION】Works on all 6V and 12V lead-acid batteries from 100 to 2000 CCA, including regular flood batteries, AGM flat batteries, AGM spiral batteries, GEL and EFB batteries for lawn mowers, motorcycles, cars, light trucks, boats, etc. Supports most standards for vehicle batteries, such as CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE..
  • 【One-Click I/M Readiness】+【A Must Have for Quick Smog Check】This ANCEL scanner AD410 PRO enables you to do a quick smog check to confirm if your car could pass the emission test. AD410 PRO code scanner---Best item to have before the annual inspection..
Check Stock

Minn Kota 1358805; Trolling Motor, Terrova 55/ Ip_Bt 54 No Fpdl

  • ... slide your trolling motor into the water. And when you're ready to move, Lift-Assist helps the motor stow effortlessly. Push-to-Test Battery Meter: Press a button on the trolling motor head to get an instant status of battery life you have left..
  • i-Pilot GPS Trolling System: The most-trusted GPS system in fishing. i-Pilot uses GPS to control your trolling motor with incredible features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. i-Pilot makes boat positioning and control automatic, and you can take command from its easy-to-read large LCD screen..
  • Spot-Lock with Jog: Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on i-Pilot GPS system that is pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the i-Pilot remote or Humminbird fish finder..
  • AutoPilot: Automatically navigate your boat in any direction you choose. Just point the h....
Check Stock

Outboard Motor, 4 Stroke 4HP 52CC Heavy Duty Outboard Fishing Boat Motor Engine with Air Cooling CDI System for Inflatable Boat Kayak Canoe Sailboat

  • 【4 Stroke 4HP Outboard Motor】- 4 Stroke 4HP Outboard Motor, superior engine air cooling CDI system to improve the reliability of the whole machine. Fuel saving, quick start, strong horsepower, superior performance, environmental protection and durable..
  • 【Features】- Start-In-Gear protection/clutch feature prohibits prop rotation while idling.
  • Features 360 degree steering rotation for reverse without gear shifting.
  • Easy pull off engine cover with push button latch for instant motor access. Compact structure, heavy duty and easy to carry, anti-corrosive construction, forward and neutral design..
  • 【Note】- Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair it. To will avoid cylinder scoring, please NOTE the fellow: 1, Start the motor on bank.
  • 2, Use the motor when it stop coming out of water, even if you want test the motor, it should be done in the river! When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked..
  • 【Warm Tips】- 1.About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a no....
Check Stock

Battery Tender Battery Load Tester for Automotive 12 Volt and 6 Volt Batteries, Includes Alligator Clamps

  • BATTERY TESTING: This handy tool helps you test battery condition and load, check starter motor draw, and assists with charging system diagnosis.
  • AUTOMOTIVE USE: Test cars, pickup trucks, SUVs, motorcycles, RVs, boats, and ATVs.
  • can be used on vehicles with up to 1,000 cranking amps.
  • SAFETY FEATURES: Rubber insulated carrying handle and color-coded heavy duty alligator clamps to keep you safe.
  • COMPATIBLE RANGE: Able to perform a 50 AMP load test for 6 Volt batteries, 100 AMP load test for 12 Volt batteries.
  • EASY TO USE: Offers accurate battery readings with the clearly marked and color-coded display and single switch operation.
Check Stock

ANCEL BA301 with Protective Case Storage Bag 6V 12V Car Battery Load Tester Alternator Analyzer Automotive Battery Cranking and Charging System Test Tool

  • ...ck the car battery based on the location of the battery inside the vehicle or outside the vehicle, capacity for analyzing battery health status and quickly provide more accurate test results, displays voltage value, standard CCA, measured CCA, SOH (%), SOC (%), internal resistance and more..
  • PERFORM MULTIPLE BATTERY SYSTEMS TESTS - Analyzes the condition of the starter cranking and alternator charging. Cranking Test to test and analyze the starter motor (cranking time, voltage, and status) and Charging Test to test and analyze the charging system (load voltage, unloaded voltage, ripple status, charging system status)..
Check Stock

Milling Machine Linear Scale, 170mm High Accuracy Linear Encoder for Milling Lathe Machine

  • Supports automatic operation including dry running and single step operation, manual operation of the CNC lathe control including motor CW/CCW, back to program 0, back to mechanical 0 and output control..
  • The interface of the direct output terminals on the back reduces the transmission board. The terminals on the back can be directly wired, clear and convenient, which saves costs.
  • Isolated I/O port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • You can power the system directly using the USB cable. This is practical for the transfer of the start screen and the program as well as for learning and operation.
  • With 20 control commands, the external manual supports the control motor CW/CCW, start, pause, alarm, emergency stop etc. The parameters of the CNC lathe control include system parameters, system self-test, I/O settings, user and manufacturer password management etc. and it supports also editing, reading, deleting and saving programs..
Check Stock

KZYEE 16.5FT KZ2000 Industrial Endoscope 1080P HD Waterproof Borescope with KS21 Battery Tester 12V CCA Auto Battery Load Tester

  • ...rechargeable lithium ion battery can last working for 3-4 hours to ensure your daily use needs..
  • Sensitive and Highly Accurate--KS21 adopts advanced conductance testing technology, making it easier and quicker to analyze the actual cold cranking amps capability of the vehicle starting battery, health state, starting system, and charging system common faults in milliseconds.
  • Batteries Can Be Tested - Tests 12 volt batteries from 100 to 1700 CCA. This is a wider range compared to its competitors. It accurately analyzes most 12V lead-acid batteries, including regular Flood, Gel, and Deep Cycle. Also, it is compatible with cars, motorcycles, trucks, ATVs, SUVs, boats, yachts, mowers, and even golf carts and lawn tractors.
  • Cranking & Charging System Test—The Vehicle Charging system test is used to make sure the system works well such as the output voltage of the generator, rectifier, and rectifier diode. The starting/Cranking system test enables it to display the decision of the starter system and cranking voltage, which allows you to check if the starter motor works correctly.
Check Stock