Reviews Motor Spindle

RATTMMOTOR CNC 2.2KW Air Cooled Spindle Motor Kit 220V Spindle Motor ER20 80mm 24000RPM+2.2KW VFD Drive 220V Inverter Variable Frequency Drive Converter+80mm Mount Clamp Bracket for CNC Router Machine

  • 【Package Include】: 1 x 2.2KW 220V Air Cooled Spindle Motor + 1 x 2.2KW VFD Inverter 220V + 1 x 80mm Spindle Motor Mount(with 3pcs screws).
  • 【2.2KW Spindle Motor】: ①This is a 220V-2.2KW air-cooled 8A Φ 80x195mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.005....
  • 【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 220V 0-50Hz/60Hz. Output：3 phase 220V 0-400Hz. Communication....
  • 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected....
  • 【80mm Spindle Motor Mount】Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much....
Check Stock

RATTMMOTOR CNC Spindle Motor Kit 2.2KW 80mm Water Cooled Spindle Motor 220V ER20 400Hz 24000RPM+2.2KW VFD Drive Inverter 220V+80mm Spindle Motor Mount Clamp+ER20 Collets+80W Water Pump for CNC Router

  • 【Package Include】: ①1 x 2.2KW 220V Water Cooled Spindle Motor ②1 x 2.2KW VFD 220V ③1 x 80mm Spindle Motor Mount(with 3pcs screws) ④1 x 80W....
  • 【2.2KW Spindle Motor】: ①This is a 220V-2.2KW water-cooled 8A Φ 80x213mm spindle motor come with a ER20 nut and collet, and equipped with a 80mm....
  • 【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 220V 0-50Hz/60Hz. Output：3 phase 220V 0-400Hz. Communication....
  • 【Multi-Protection Functions of VFD】Including overload protection, FUSE broken-motor stops protection, over-voltage / low-voltage protection,....
  • 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected....
Check Stock

CNC Router Machine 2.2KW 4 Axis 6090 USB CNC Router Kit 3D Engraving Machine + VFD Water-Cooling Spindle Motor +Control Box + Handwheel, Ball Screw, with Limit Switch, US STOCK

  • ✅ [Powerful Performance] Spindle Speed: 24000RPM. Spindle motor: 2200Whigh-speed variable frequency spindle motor, ER20 chuck, matching 6mm collet. Working Speed :50-1500mm/min. Drive of Stepping motor: 0-3.5A adjustable four-axis drive. Variable-frequency Drive(VFD): AC110V, 0-400Hz(built-in Control box ) (Tips: The spindle motor must connect with the VFD. It cannot directly connect with the supply voltage (AC110V).).
  • ✅ [ROUTER 6090 Parameters] Model: CNC6090GZ. X,Y,Z Working Area: 900(Y) x 600(X) x 140mm(Z). Outside dimension: 1150x970x650mm(LxWxH). Working platform size: 1045x720mm(LxW). Frame Material：The whole machine used 6061 aluminum profiles. Max. Feeding height: ≤140mm(From base of Z axis to platform). X/Y/Z axis--- Ball Screws. Stepping motor: 57 Two-phase 3A 150N.cm..
  • ✅ [High Quality and Durable] Water Cooled Spindle Motor Can Work Longer Time Than Air Cooled Motor. Has Higher Stability And Better Concentricity Than Air Cooled Motor. High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle. (Note: Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.).
Check Stock

RATTMMOTOR 400W Blushless CNC Air Cooled Spindle Motor ER8 12000RPM + 600W Blushless Spindle Motor Driver LCD Panel without Hall + 55mm Clamp Mount for CNC Router Milling Machine

  • 【Brussless Spindle Motor】Power: 400W.
  • Note: Please see clearly that this spindle motor output shaft is with ER8 collet,and output shaft is complete shaft, can't be exchanged to ER11, ER16....
  • 【Brussless Spindle Motor Driver】Maximum driver power: 600W.
  • Maximum driver motor running speed: 12000R/Min.
  • Brushless spindle driver（Model Name: NVBDL）is specialized for the ecomomic engraving machine,it matchs with the brushless DC motor. With the....
  • The users can take down the panel from the main driver and install it on the controller cabinet.By the panel,you can set the parameter,control motor....
Check Stock

RATTMMOTOR 110V Water Cooled Spindle Motor Kit 2.2KW ER20 Spindle Motor φ80mm 24000RPM+2.2KW VFD 110V Inverter Variable Frequency Drive+80mm Spindle Mount+80W Water Pump for CNC Router Milling Machine

  • 【2.2KW Spindle Motor】: ①This is a 110V-2.2KW water-cooled 15A Φ 80x213mm spindle motor come with a ER20 nut and collet, and equipped with a....
  • 【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 110V 0-50Hz/60Hz. Output：3 phase 110V 0-400Hz.Under normal....
  • 【80mm Spindle Motor Mount】Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much....
  • 【80W 110V Water Pump】Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 110V. Also suitable for 0.8KW, 1.5KW, 2.2KW, 3KW and other high speed CNC....
  • 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected....
Check Stock

LiFuJunDong 4 Axis USB CNC6040 Router Engraving Machine 3D Milling Machine w/Controller 110V 1.5KW VFD Water-Cooling Router Engraving Machines for Metal, Wood, Glass and Plastic (6040 1.5KW 4AXIS)

  • ... Aluminium alloy Max. Feeding height: ≤100mm Drive unit: X axis---1605 Ball Screws Y axis---1605 Ball Screws Z axis---1204 Ball Screws Sliding unit: X axis---High intensity Chromeplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Stepping motor: 57 two-phase 3A 150N.cm.
  • SPINDLE MOTOR-1】 Outside dimension: 65*158mm Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power: AC110V, 60Hz, 5A, 1.5 KW VFD Spindle motor: 1.5 KW Water Cooled Spindle speed: 24000 rpm Max working frequency: 400Hz Principal axis collet: ER11collet, Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed ​​mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM.
  • SPINDLE MOTOR-2】Lubrication way: lubricated by high grease Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03mm Carving Instructions: G code / TAB files / nc file / NCC files Communication interface: through USB connection with computer Working Speed: 50-1500mm / min (different material with different speed settings) Maximum Idle speed: 0-1500mm/min.
  • HIGHLIGHTS OF WATER COOLING SYSTEM 】It can cool the spindle and protect the machine Avoid the spindle burn o....
Check Stock

Grizzly G9933 Three Spindle Shaper

  • Motor size: 3 H.P. TEFC Single Phase 220V.
  • Working size of table: 15-Inch x 32-Inch.
Check Stock

CNC Spindle CNC Motor 220V 7.5KW 7500W Square Air Cooled Spindle Motor 4 Bearings ER32 18000RPM 300HZ for CNC Router Machine

  • 【BASIC INFORMATION】-This spindle motor should work with 220v,300HZ vfd . 2 Poles, Collet ER32-6mm,Voltage: 220V ,Power: 7.5KW, Frequency: 300 Hz,....
  • 【EASY AND FAST TO ASSEMBLE 】-We offer pre-soldered aviation wire , The appearance design of square spindle motor have 2 sides mounting holes to....
  • 【SPINDLE ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor.
  • 【WIDE APPLICATION】-Kinds of engraving and drilling material :Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass,....
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing....
Check Stock

CNC Spindle, MYSWEETY 500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving

  • ️【CNC Spindle kit 500W】- 1 x 500W Air-Cooled Spindle Motor, 1 x AC110V/220V Speed Governor with MACH3, 1 x 52mm Mount bracket, 13 x ER11 collect, 10 x V Bit Cutter, 4 x Screws(free)..
  • ️【500W CNC Spindle motor】- Operating voltage: 100VDC, Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM. Insulation resistance:> 2 megohms, Dielectric strength: 400V. Motor Length: 200MM, High precision spindle run out 0.01-0.03..
  • ️【Speed Power Switch】- Input voltage: AC110V/220V, 50/60Hz. Output current peak: 6A. Output voltage: DC0-100V. Please install in the place that is draughty, no dramatic impact, no vibration, no explosion hazard medium, no conductive metal particle..
  • ️【 52mm Mount Bracket】- Made of high quality cast aluminum, this spindle motor bracket clamp is strong and durable. Diameter: 52mm, Chuck portion length: 45MM, Chuck portion diameter: 16mm..
  • ️【ER11 Collet Chuck】- 13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm). Run-out tolerance 0.01mm. For CNC milling Lathe Tool & Work holding Engraving machine..
Check Stock

MYSWEETY 110V 1.5KW Water Cooled Spindle Motor CNC Spindle Motor +1.5KW Converter + 65MM Clamp Mount + 13pcs ER11 Collet + 5M Water Pipe + 110V Water Pump

  • ✅ Package include: ①1 x 1.5KW 110V Spindle Motor ②1 x 1.5KW 110V VFD ③1 x 75W 110V Water Pump ④1 x 196 in Water Pipes ⑤1 x 2.6 in Spindle Motor Mount ⑥1x40 in Electric Wire ⑦10 x Drill Bits ⑧1 x2.8 in Brushes ⑨13 x ER11 Collet(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm).
  • ✅1.5KW Spindle Motor：Technical Parameters:φ1.16 x 10.5in (Diameter: 2.95cm x Length: 26.7 cm).
  • Weight: 7.05 ib. The spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc. Used for engraving machine or used with frequency converter..
  • Output Current: 5A. The machine is screwed to ensure the safety and reliability of the use. DC cooling fan low noise, large air volume.The converter has overload protection, overvoltage protection overheat protection etc..
  • ✅75W 110V Water Pump：Power: 75W, Flow: 3000L/H, Hmax: 3.5M, Voltage: 110V/60HZ, Size: L4.8xW3.5xH4.3 in. This is a high-performan....
Check Stock

DNYSYSJ 1500W CNC Router Engraver Machine, 6040 3Axis USB Engraving Drilling Milling Carving Machine 3D Carving Desktop Machine DIY Artwork Woodworking

  • ... Acrylic, wood, composite board plywood. and soft metal .like aluminum, copper and silver to engrave them into 3D/2D works etc. The machine can connect with computer as other external device such as printer, scanner. With the assist of the ROUTER 6040T, your design idea will be real-time display..
  • ★【Water cooled spindle motor】It can work longer time than air cooled motor.Water cooled spindle motor has higher stability and better concentricity than air cooled motor,water cooling spindle works more stable and durable.(tips：1. The spindle motor must connect with the VFD.)The mini router Frame is movable..
  • ★【It can used for engraving】Advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin doublecolor plate, PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc..
  • ★【Wide Range of Applications】This 6040 machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. Suitable for PCB, wood, Plexi glass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE, Aluminum material, Copper..
  • ★【The NEW 1.5KW water-cooled VFD】 It is available operating for long tim....
Check Stock

MYSWEETY Upgrade Version CNC 3018 Pro Engraver Machine, GRBL Control DIY Mini 3 Axis CNC Router Kit, Wood Router Engraver Pcb Milling Machine with Offline Controller + ER11 and 5mm Extension Rod

  • New Version: CNC 3018-PRO is an upgraded version of 3018. Control software: GRBL.
  • Spindle: 775 spindle motor (12-36V) 24V:10000r / min. Supported System: Windows XP / Win 7 / Win 8 / Win 10..
  • The main two advantages of offline controller : 1,do not need to connect the computer.
  • 2,do not need to download files. Manually adjust X, Y, Z axis location as engraving starting point, manually open or close spindle, manully open or close cooling fan..
  • Simple Assembly: Download the English manual and software: https://s3.us-east-2.amazonaws.com/3018pro/3018PRO_1.1(1).rar. If you have any question, please contact us firstly, thanks!.
  • This engraving machine can be engraved plastic, wood, acrylic, pvc, pcb, wood or the like material. Drill bit can not engrave hard metal, jade or other hard materials. Some components and core components have been assembled, simply hand assembled according to the installation instructions, you can use the rack..
  • Plastic body with a profile, small size, light weight, USB interface, GRBL control systems, learn to use the preferred entry. Either by inscribing, and can be carved with lasers(not include). You can buy the laser head on asin: B07334WBC9, B07GR29FZR, B07GR22BL4.DescriptionDescription:.
Check Stock

2.2KW 3HP Spindle Motor and VFD Set Air Cooled Er20 CNC Spindle with Matching Variable Frequency Drive Inverter 220V

  • 2.2kw Air -cooled Motor Spindle and Matching Inverter.
  • 2200kw Air -cooling High Speed High Precision Spindle.
  • RS485 communication port,adopting standard international MODBUS main circuit control 1.5KW 2HP VFD.
Check Stock