Reviews Motor Shaft Sleeve

HVAC Motor 1/100 HP 3000 RPM 120V 3.3

  • Price For: Each Body Dia.: 3.3" Motor Shaft Design: Flat Motor Service Factor: 1.00 Frame: 3.3 Motor Bearings: Sleeve Phase: 1 Max. Ambient Temp.: 40....
  • Duty: Continuous Mounting Pattern: 2-7/8 x 2-7/8 RPM Range: 1801-3000 Voltage: 120 Voltage Compatibility: 115, 120 Shaft Length: 3-1/2" Mounting Stud....
  • Length Less Shaft: 2-7/16" Shaft Dia.: 1/4" Country of Origin (subject to change): Mexico.
Check Stock

uxcell 4mm Drive Shaft, L250mm Shaft, L200mm Sleeve, D36mm Propeller, Fit for 3.17mm Motor Shaft

  • The material OF SHAFT - stainless steel..
  • SIZE - suit for motor shaft diameter: 3.17 mm.
  • drive shaft size: 250 x 4 mm (length*diameter).
  • shaft sleeve size: 200 x 9.5 mm (length*outer diameter).
  • NOTE - there are bearings between the shaft and the shaft sleeve, it could hold on high strength and speed in a whirl..
  • APPLICATION - compatible with DIY model..
  • PACKAGE CONTENT - 1 x Drive shaft assemble kit..
Check Stock

Darton 300-018 Dry Cylinder Sleeve Kit for H22 & H23

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 3/4” to 1” diameter. It comes with 1.77"" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

SPI Fix Kit 2010-2012 fits Polaris 800 Sleds 85mm Pistons Bearings & Fix Kit

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 1"-3/4"x1/4"-3/16" inch diameter. It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

Bettomshin Drive Shaft w Propeller and Universal Joint for RC Boat, L200mm Shaft, L150mm Sleeve, D36mm Propeller, Fit for 3.17mm Motor Shaft

  • 【Parameters】- Shaft length: 20cm/7.8".
  • Suit for motor shaft diameter: 3.17mm/0.12".
  • 【High Quality】- RC boat propeller shaft kit is made of stainless steel,corrosion-resistant,wear-resistant and good sealing..
  • 【Feature】- There is bearings between the shaft and the shaft sleeve, it could hold on high strength and speed in whirl..
  • 【Application】- The propeller shaft is suitable for the different types of boats ,simulation compatible with DIY RC model, such as RC boat toy ,RC submarine and so on..
Check Stock

Wiseco 74.0Mm Black Anodized Piston Ring Compressor Sleeve By Jm Auto Racing (Rcs07400)

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 7/8" to 1" diameter. It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

Carrier Condensor Electric Motor (5KCP39BGS069S) 1/10hp, 1100 RPM, 208-230V Fasco # G3907

  • 1/10 hp, .75 amps, 1100 RPM, 208-230 Volts.
Check Stock

AA Performance Products 88 x 69mm 1700cc Slip-in Piston & Cylinder Kit, Fits VW

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft for 5/8" x 3/4" x 3" diameter.It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

X AUTOHAUX 1\ to 1 1/8 Inch -1/4\ Engine Shaft Sleeve Adapter Kit with Step Key for Car

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 1" to 1 1/ 8 inch -1/4" diameter. It comes with 2.05" step key..
  • [ ] Made from cold rolled stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

Heyiarbeit Drive Shaft Fit for 2mm Motor Shaft w Propeller and Universal Joint for RC Boat, L100mm Shaft, L50mm Sleeve, D36mm Propeller

  • 【Parameters】- Shaft length: 10cm/3.94".
  • Suit for motor shaft diameter: 2mm/0.08".
  • 【High Material】- Remote control boat propeller shaft kit is made of stainless steel, which has good corrosion resistance and wear resistance, and has good sealing performance.
  • 【Advantages】This RC boat drive shaft assemble kit is composed of high quality materials, with speed anti-impact plastic propeller which with light weight and small size designing, is a Good choice for the repairing and replacing of your rc boat..
  • 【Application】- The propeller shaft is suitable for the different types of boats ,simulation compatible with DIY RC model, such as RC boat,RC submarine and so on.
  • 【Note】- This ship assembly is equipped with a bearing between the shaft and the shaft sleeve, which can maintain high strength and high speed when rotating.
Check Stock

Bapmic Mechatronics Sealing Sleeve and Double D Gasket Compatible with BMW E60 E65 E66 E70 E71 E90 335i

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 3/4"to 7/8" inch diameter. It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

Cloudray Mechanical Parts Set Inner Sliding Rails 1300x900 Single Head For CO2 Laser engraver Engraving Cutting Machine

  • Application size: Stepper motor 8mm to 11mm bore adapter.
  • Turbine reducer shaft sleeve 8mm to 11mm bore adapter for worm gear reducer shaft sleeve.
Check Stock

Pool Pump Motor, 1-1/2 HP, 3450, 115/230V

  • Price For: Each Hz: 60 Motor Shaft Rotation: CCWSE Phase: 1 Motor Sub Application: Pool and Spa Pump Motor Application: Pump Motor Enclosure Design: Open Dripproof Motor Thermal Protection: Auto Standards: UL Recognized (E25022/46412), CSA Certified (LR43341), UL 1081, 1563, 1795 Approvable Voltage Compatibility: 115, 120, 230, 240, 115/230, 120/240 Shaft: Threaded 3/8-16 UNC-2A.
  • Voltage: 115/230 Shaft Material: Stainless Steel Shaft Length: 1-13/16" Nameplate RPM: 3450 Motor Mounting Type: Rigid Base Item: Pool and Spa Pump Motor Motor Design: Capacitor-Start HP: 1-1/2 Ins. Class: B Shaft Dia.: 1/2" Full Load Amps: 16.0/8.0 Finish: Black Motor Service Factor: 1.00 Motor Bearings: Ball Frame: 48Y Country of Origin (subject to change): Mexico.
Check Stock