Reviews Motor For 1foot Jon Boat
Pro Controll EZ Mount Trolling Motor Bow Mount Bracket
- MORE MOUNTING OPTIONS: Fish from the bow like the Pros.
- An mounting bracket that converts transom mount trolling motors to bow mount.
- Fits most Jon or Utility boats with gunnels or toprails less than three inches wide and one inch deep.
- PREMIUM DURABILITY: Constructed with stainless steel hardware and indestructible fiberglass reinforced nylon.
- FAST SET UP: Simple and seamless tool-free installation.
- Line up the lower bracket to the outside of the boat, screw clamps tight, and slide on the trolling motor.
- UNIVERSAL FIT: Measures 9.5” L x 6.75” W x 9” H and weighs 6 lbs.
- EZ Mount lets you install your transom mount motor anywhere on the boat.
- Built with the needs of the Angler in mind.
Check StockPro Controll EZ Mount II Bow Mount Trolling Motor Bracket
- UNIVERSAL REPLACEMENT: A universal bracket that converts transom mount trolling motors to bow mount in minutes.
- Fits most Jon or Utility boats with gunnels or toprails less than three inches wide and one inch deep..
- STRONG & STURDY: Built to mount trolling motors up to 60 lb thrust.
- Indestructible fiberglass reinforced nylon.
- FAST & EASY SET UP: Installs quickly with a small hammer and punch to remove and replace pin.
- Spend less time assembling and more time fishing.
- ULTIMATE VERSATILITY: A trolling motor mounting bracket with choices.
- EZ Mount 2 lets you install your transom mount motor anywhere on the boat.
- Built with the needs of the Angler in mind.
Check StockBullnose Rudder clamp on boat rudder fits a 1.125\ transom trolling motor shaft. Commonly used for, inflatable Pontoon, Pelican Bass Raider 10E, fishing Kayak, Canoe, Jon boat, etc. USA Manufactured
- PERFECT SOLUTION - Trolling motors are known for lack of steering especially when the wind picks up, the water is choppy or you want to track in a straight line. Simply add a Bullnose Rudder which is designed to give you better control of your watercraft in most windy conditions, help hold a true course at most trolling speeds, and prevent the boat from spinning as much when the motor is off. Patent no. D712,341S.
- FIT - The Bullnose Rudder is a boat rudder that fits a 1 1/8" (1.125") transom trolling motor shaft. Please note, it will NOT work on a self deploy bow mount trolling motor. It measures 10.5" high x 4.75" wide and fits a 1 1/8" shaft diameter. It's most commonly used for "but not limited to" minn kota trolling motor, motorguide trolling motors, newport vessel trolling motor, etc. Common tiny boats used are, inflatable pontoon, Pelican Bass Raider 10E, fishing kayak, canoes, jon boats, and more..
- ESSENTIAL - In most cases it helps hold a true course at both a slow and high trolling speeds. Customers have also said, “it prevents the boat from spinning as much when the motor is off”. Most tiny boats will benefit from having some kind of a rudder set up in the back vs not having a rudder at all. Only takes a few minutes to install a....
Check StockWatersnake Tracer Transom Mount Trolling Freshwater Motor (30-Pound Thrust, 30-Inch Shaft, 12-Volt)
- VARIETY OF SPEED: Includes five forward speeds and two reverse speeds.
- WEEDLESS DESIGN: Weedless two-blade propeller designed to allow your boat to move easily through the water and weeds..
- COMPATIBILITY: Suits various styles of small watercraft including kayaks, canoes, inflatables, Jon boats, and more..
- FEATURES: 30-inch telescopic chrome plated steel shaft, 30lbs thrust, extendable tiller operating.
- SATISFACTION GUARANTEE: Necessity is the mother of invention. Created by anglers to be used by anglers. If you’re not satisfied with your Watersnake Electric Motor, contact your distributor to be taken care of..
Check StockWatersnake Tracer Transom Mount Trolling Freshwater Motor (54-Pound Thrust, 42-Inch Shaft, 12-Volt)
- VARIETY OF SPEED: Includes five forward speeds and two reverse speeds.
- WEEDLESS DESIGN: Weedless three-blade propeller designed to allow your boat to move easily through the water and weeds..
- COMPATIBILITY: Suits various styles of small watercraft including kayaks, canoes, inflatables, Jon boats, and more..
- FEATURES: 42-inch telescopic chrome plated steel shaft, 54lbs thrust, extendable tiller operating.
- SATISFACTION GUARANTEE: Necessity is the mother of invention. Created by anglers to be used by anglers. If you’re not satisfied with your Watersnake Electric Motor, contact your distributor to be taken care of..
Check StockGEARFLAG 600D Jon Boat Cover Heavy Duty Waterproof Marine Grade UV Resistant Reinforced Adjustable Side Straps 12 -14 Long 600D Beam Width to 70
- [ 600D DURABLE POLYESTER ] Boat cover made of durable 600D Polyester outer surface material with coating for maximum protection for boats against....
- [ INTEGRATED STRAP SYSTEM ] Integrated buckle and strap system on GEARFLAG boat cover for easy fitting and trailering boat. Adjustable tie down straps....
- [ ELASTIC HEM ] Elastic Hem on jon boat cover front and rear with sew-in elastic cord for custom fit to different boat shapes..
- [ FULL CUT ] Full-cut boat cover to allow extra room for on board accessory for boat such as bow rails, running lights, seats etc..
- [ STORAGE BAG ] GEARFLAG boat cover comes with storage bag and trailering straps. Number of straps depends on different size of boat cover. Warranty....
Check StockKnots12 Laser Sailboat Dinghy Bottom Cover Lightweight Silver/UV
- These LED lights are portable, which provide an easy and effective boat safety lighting solution..
- The silicone sleeve making them water-resistant, they can be easily mounted on bow, stern, mast or paddles without tools.
- Great boat accessories gifts for boat enthusiast. An inexpensive backup light set for dingy or racing sailboat..
- Works well on Pontoon, Jon, Fishing, Skeeter, and kayaks and other inflatable boats..
- 3 light modes for you: steady on, strobe & slow blink..
Check StockNewport Kayak Hand Bilge Pump, Blue
- DUAL ACTION: Our Kayak Hand Bilge Pump is dual action, meaning whether you're pushing or pulling, it's still pumping water out of your boat..
- FLOATING: If you drop it overboard, this pump will float back up to the surface for you..
- EJECTION TUBE: Our pump includes an ejection tube, so the water you pump doesn't end up back in your boat..
- WHY: Quickly pump water out of the floor of your kayak, canoe, jon boat, inflatable dinghy, sailing dinghy, or other small watercraft. Use the ejection hose to clear the hull so the water isn't ending up back in your boat..
- INCLUDED IN BOX: Kayak Bilge Pump w/ Foam Float, Water ejection tube.
Check StockLaunching the Capsule
- Large Load Capacity: The boat launching wheels are designed to enable one people launching of an inflatable boat. The weight capacity of the 12"/30.5....
- Durable Aluminum Alloy: Our inflatable boat launch wheels arms are made of durable aluminum alloy with CNC processing, which will hold up even under....
- Quick Release Pins: The transom launching wheels are equipped with 2 pairs of sturdy quick release pins. The accessories play an essential role in....
- Simple Installation: The dinghy transom launching wheels set is easy to operate, saving much time. You need to follow the steps in the picture, and it....
- Extensive Application: The inflatable boat transom launching wheel is widely applicable to most boats with a transom, such as Jon boats, dinghy,....
Check StockPSEQT LED Marine Boat Deck Lights Stern Courtesy Interior Pontoon Anchor Light Waterproof for boats Night Fishing Kayak Yacht Duck John Boat
- ✅【Universal Application】Led Boat Lights fit for boat interior light, interior courtesy light, deck light, cockpit light, transom light, step light, interior cabin light, courtesy light, navigation light, stern light, side light, atmosphere light, etc..
- ✅【Features】Led Marine Boat Interior Lights widely work for Pontoon Boat, Fishing Boat, Kayak, Yacht, Sailboat, Dinghy, Bass boat, Jon boat, Boat Trailer, Warships, Submarines, etc..
- ✅【High Quality】Boat Interior light has 6 LED bulbs each, super brightness. Quality flange constructed, made of PC lens and Chrome Bezel. IP68 Waterproof, can work under any conditions. No need to worry about marine working..
- ✅【Easy to Install】Flush mount, 2 wires connection: Black is Negative and Red is Positive. Fix with screws, they can be mounted anywhere you want..
- ✅【PSEQT Warranty】5 Years Warranty Guarantee. Strictly testing before shipping. Feel free contact us for any question, we have professional service and excellent quality team..
Check StockPontoon LED Strip Lights 16.4FT 12V Waterproof Marine Boat Interior Courtesy Lights Under Deck Night Fishing Lights with Mounting Brackets Adhesive Tape and Extension Cable for Pontoon Boat Green
- 【Bright Pontoon Boat Lights】: The 16.4FT pontoon boat lights feature 3000 high-brightness LED bulb, which can light up the pontoon boat for you,....
- 【Waterproof and Durable】: The boat LED lights are IP65 rated, which is strong enough to ensure waterproof for use on boats.
- 【Wide Application】: The marine LED lights are perfect for pontoon boat, fishing boat, duck boat, bass boat, kayak, Jon boat, sailboat or other....
- 【Easy Installation】: The back of the boat led strip lights are sticky, but the kit is also equipped with a 19.7FT heavy duty adhesive tape and....
- 【Package includes】: 1 x 16.4FT marine boat LED light, 15 x mounting brackets and Screw, 1 x 19.7FT adhesive tape and 1 x 6.6FT Extension Cable.
Check StockLifeboat
- 【APPLICATION】 With 18Pcs Germany 5050 led chips, these lights can produce a very visible light of 5 miles, perfect to use for Boat navigation lights, boat bow lights, boat runing lights, boating lights and so on..
- 【BRIGHTER AND SAFER THAN ORIGINAL NAVIGATION LIGHTS】 Compared to original nav lights, our new strip lights are at least 4 times brighter which will make boating or kayaking safer..
- 【NO DRILLING INSTALL】 The strong Double-sided adhesive on the back of the strip lights and flexible body design enables you to mount it in any where you want, perfect to install it on the rub rail, above rail and below the rail..
- 【GREA FOR NIGHT FISHING】 These lights can make your boat meet legal requirements, what’s more, these lights are so bright that they can even lights up the water, bring you a good vision and attract the fish..
- 【HELP DOCKING EASIER】 These lights are super bright that can light up the dock, make docking easier.
- 【MATERIAL】 Made of high quality ABS Material, nicely sealed in silicone. 22awg wire Guage and 32inch long wire makes it a breeze to connect to your boat wire..
- 【IP67 WATERPROOF】 Professional marine strip lights, Raining Resistant, Washing Resistant, Seawater Splashing Resistant..
Check StockShoreLand'r 68038 Chrome Lug Nuts Used for Alum
- Durable Stainless Steel: Our inflatable boat launch wheels arms are made of durable stainless steel with CNC processing, which will hold up even under the most extreme conditions. And the frame arms with anodized coating have features of superior durability and long service life..
- Large Load Capacity: The boat launching wheels are designed to enable one people launching of an inflatable boat. The weight capacity of the 15"/38.1 cm boat transom launching wheel reaches 300 Lbs/136 kg, making the towing boat a breeze on different road surfaces..
- Strong Inner Tubes: We thickened the tubes that can holder more heavy boat/yacht, and you don't worry about tubes exploding.
- Simple Installation: The dinghy transom launching wheels set is easy to operate, saving much time. You need to follow the steps in the picture, and it can be disassembled effortlessly. In addition, the wheel arms kit is small and space-saving..
- Extensive Application: The inflatable boat transom launching wheel is widely applicable to most boats with a transom, such as Jon boats, dinghy, inflatable boats, mud boats, rowboats, sailing dinghies, etc. The wheels are suitable for grass, hard or soft sand, and dirt..
Check Stock