Reviews Motor Driver With Power Management

RATTMMOTOR 400W Blushless CNC Air Cooled Spindle Motor ER8 12000RPM + 600W Blushless Spindle Motor Driver LCD Panel without Hall + 55mm Clamp Mount for CNC Router Milling Machine

  • 【Brussless Spindle Motor】Power: 400W.
  • Note: Please see clearly that this spindle motor output shaft is with ER8 collet,and output shaft is complete shaft, can't be exchanged to ER11, ER16....
  • 【Brussless Spindle Motor Driver】Maximum driver power: 600W.
  • Maximum driver motor running speed: 12000R/Min.
  • Brushless spindle driver（Model Name: NVBDL）is specialized for the ecomomic engraving machine,it matchs with the brushless DC motor. With the....
  • The users can take down the panel from the main driver and install it on the controller cabinet.By the panel,you can set the parameter,control motor....
Check Stock

SVS PC-2000 Pro 12\ Ported Cylinder Subwoofer (Piano Black)

  • Dual ferrite magnet motor assembly weighing nearly over 15 lbs generates massive amounts of magnetics to produce extreme driver excursion without losing control.
  • Lightweight and rigid aluminum vented cone with composite fiber dustcap creates room-energizing SPLs while maintaining control even at the highest drive levels.
  • Long-throw parabolic surround using proprietary injection molding allows extreme excursion for bass you can feel while preserving drive unit longevity.
  • Aluminum pole piece extension improves thermal management properties for exceptional heat dissipation.
  • Dual layer voice coil design maximizes linearity and accuracy at full excursion while minimizing distortion and power compression.
Check Stock

3 Axis CNC Kit Nema23 Stepper Motor Dual Shaft 425oz-in 112mm 3A & Driver 40VDC 4A 128 microstep for CNC Router Milling Engraving Machine

  • ♞【Product】3 Axis nema23 stepper motor driver usbcnc controller kit.
  • ♞【Nema 23 Stepper Motor】 Nema 23 Stepper Motor / Holding Torque: 425oz-in,280Ncm / Motor Size:57x57x112mm / Phase:2 / 4pcs lead wire / 1.8 Step.
  • ♞【Stepper Motor Driver】FMD2740C Stepper Motor Driver / 4Amps / Support voltages:12 to 50V DC / 128microstep.
  • ♞【4 Axis USBCNC breakout board】 Come with Hand Control with USB Cable / Only support USBCNC software / input voltage: 15-36V DC..
  • ♞【DC Power Supply】400W 36V 11A DC Switching power supply.
Check Stock

HiLetgo L298P DC Motor Drive Module L298P DC Motor Drive Shield H-Bridge Drive Expansion Board High-Power DC Stepper Motor Controller for Arduino

  • Driven part of the input voltage VS: VIN Input 6.5 ~ 12V, PWRIN 4.8 ~ 35V input..
  • The L298P shield DC motor driver has PWM speed control mode.
  • Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A..
  • Stack design can be directly plugged into the Arduino, easier to use..
Check Stock

New Milwaukee 2313-21 12 Volt M12 Cordless Inspection Camera System Scope Sale

  • 2804-20 hammer drill: POWERSTATE brushless motor delivers up to 60% more power, is the most compact in its class at 6.9 in. L, and provides up to 2X faster speed under heavy load 2804-20 hammer drill delivers up to 1,200 in./lbs. of torque Compatible with all M18 batteries and tools.
  • 2853-20 impact driver delivers up to 25% more torque with up to 2,000 in./lbs. to complete more demanding applications 2853-20 impact driver: most compact impact driver at 4.59 in. L providing more access in tight spaces M18 FUEL SAWZALL is the fastest cutting reciprocating saw in its class and leverages a POWERSTATE brushless motor to provide users with 3,000 SPM with a 1-1/4 in. stroke length for faster material removal.
  • 2730-20 6-1/2 in. circular saw: POWERSTATE brushless motor provides increased cutting speed and power through the toughest applications M18 FUEL 1/2 in. mid-torque impact wrench with friction ring delivers the best power to weight ratio, most access in tight spaces, and faster removal speed, it provides 650 ft. lbs. of nut-busting torque and only weighs 5.1 lbs..
  • 4-1/2 in./5 in. grinder with paddle switch: POWERSTATE brushless motor delivers maximum sustained power to complete the toughest grinding, surface prep and cutting applications.
Check Stock

8PCS L298N Motor Drive Controller Board Dual H Bridge DC Robot Stepper Motor Compatible with Ardu-ino Electric Projects, Smart Car Robot

  • Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
  • The L298N driver module, using L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface, you can chip circuitry to 5V power supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential..
  • Terminal driver part of the supply area VMS: +5V ~ +35V.
  • Drive part of the peak current Io: 2A / Bridge.
  • Logical part of the terminal power supply range Vss :4.5-5 .5V.
  • Logical part of the operating current range: 0 ~ 36mA.
  • The control signal input voltage range: 4.5-5.5V low 0V high.
  • To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
  • High working power to 46v, large current can reach 3A MAX and continue current is 2A, power to 25w..
  • Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability, large capacity filter capacitance,afterflow protection diode, more stable and reliable..
Check Stock

TECCPO Power Drill, Cordless Drill with Battery and Charger(2000mAh), 530 In-lbs, 24+1 Torque Setting, 0-1700RPM Variable Speed, 33pcs Accessories Drill Set, Drill with 1/2' Metal Keyless Chuck

  • ...hium-Ion battery and 2A ultra fast charger. The additional battery and fast charger makes the cordless drill always ready to use without restriction. 3-Level power indicator of the teccpo cordless drill can warn you of the state of the battery. Cordless drill with battery and charger also owns excellent temperature management system which can protect the battery from being overheated..
  • 【1/2" Metal Chuck & Forward/Reserve Switch & LED Light】Compared with 3/8" plastic chuck, 1/2”keyless metal ratcheting chuck owns excellent performance in providing maximum accessory compatibility and durability.
  • Forward/reserve switch of this drill driver is available for drilling and fastening, allows you to either screw or replace/remove bits according to your needs. Drill driver set also with trigger-activated LED light which can illuminate the dark area to ensure work accuracy..
  • 【Ergonomic Design & Compact & Lightweight 】Drill with ergonomic grip handle design which can offer maximum comfort for one-handed operation and less vibration during the heavy work.
  • The sturdy belt clips of the drill bit set make it easy to carry around, especially on a ladder.
  • Compared with other power drills, TECCPO wireless electric drill is perfect to reduce fatigue for long ti....
Check Stock

TIMPANO TPT-D3200TI-ND 2″ Exit Neodymium Titanium Compression Driver for High Output, Frequency Response from 1,600 to 19,000 Hz

  • Power You Can Rely On: The high energy motor is also response for output up to 110 dB with only one watt of input power.
  • New Technology: A neodymium motor focuses magnet flux into the gap while keeping driver weight below 3.92 pounds.
  • Designed for Efficiency: Compression horn driver uses a neodymium ring motor design to pack as much BL product into the voice coil gap as possible.
  • Solid Structure: When combined with the titanium dome diaphragm, to produce crisp sound over a broad range (from 1,200 to 18,000 Hz) with an emphasis on the critical mid range high range.
  • Quality You Can Trust: Choose Timpano’s D3200TI-ND titanium compression driver for a high output compression driver to be used for the critical mid range high (vocals).
Check Stock

DS18 PRO-DRNEO 2\ Throat Bolt On Neodymium Compression Driver 3\ Titanium Voice Coil 800 Watts 115dB 8-Ohm (Single)

  • DS18 designs its Compression Drivers with aluminum horns to make sure they are above and beyond the standard high frequency driver/tweeter/horns in the market. These bad boys give so much clarity to their frequencies that any audio enthusiast would believe their whole sound system is ready to deploy for a major concert..
  • PEAK POWER HANDLING - At 800W Max and 600W RMS the PRO-DRNEO neodymium compression (horn) driver boasts out-of-this-world power handling for a Pro audio sound you will love..
  • TOP QUALITY NEODYMIUM MAGNETS - Neodymium magnets provide a higher magnetic flux density in the air gap, which generates a much greater action force in the voice coil. DS18 manufacturs nothing but the best..
  • NEODYMIUM MOTOR STRUCTURE - Provides the most motor force of any other driver motor on the market. Intense high frequency loudness without sacrificing sound quality..
  • USE WITH A WIDE VARIETY OF HORN STYLES - This compression driver features standard 3" (101.6mm) TPI threading, which allows it to work as a replacement driver for many popular horns..
Check Stock

Milwaukee M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Combo Kit with Two 5.0 Ah Batteries, 1 Charger, 2 Tool Bags (7-Tool)

  • ...RSTATE brushless motor delivers up to 60% more power, is the most compact in its class at 6.9 in. L, and provides up to 2X faster speed under heavy load 2804-20 hammer drill delivers up to 1,200 in./lbs. of torque Compatible with all M18 batteries and tools.
  • 2853-20 impact driver delivers up to 25% more torque with up to 2,000 in./lbs. to complete more demanding applications 2853-20 impact driver: most compact impact driver at 4.59 in. L providing more access in tight spaces M18 FUEL SAWZALL is the fastest cutting reciprocating saw in its class and leverages a POWERSTATE brushless motor to provide users with 3,000 SPM with a 1-1/4 in. stroke length for faster material removal.
  • 2730-20 6-1/2 in. circular saw: POWERSTATE brushless motor provides increased cutting speed and power through the toughest applications M18 FUEL 1/2 in. mid-torque impact wrench with friction ring delivers the best power to weight ratio, most access in tight spaces, and faster removal speed, it provides 650 ft. lbs. of nut-busting torque and only weighs 5.1 lbs..
  • 4-1/2 in./5 in. grinder with paddle switch: POWERSTATE brushless motor delivers maximum s....
Check Stock

Milwaukee 2893-22CXP M18 18-Volt Lithium-Ion Brushless Cordless Hammer Drill/Impact/Hackzaw Combo Kit (3-Tool) with 2 Batteries, Charger and Bag

  • ...RSTATE brushless motor delivers up to 60% more power, is the most compact in its class at 6.9 in. L, and provides up to 2X faster speed under heavy load 2804-20 hammer drill delivers up to 1,200 in./lbs. of torque Compatible with all M18 batteries and tools.
  • 2853-20 impact driver delivers up to 25% more torque with up to 2,000 in./lbs. to complete more demanding applications 2853-20 impact driver: most compact impact driver at 4.59 in. L providing more access in tight spaces M18 FUEL SAWZALL is the fastest cutting reciprocating saw in its class and leverages a POWERSTATE brushless motor to provide users with 3,000 SPM with a 1-1/4 in. stroke length for faster material removal.
  • 2730-20 6-1/2 in. circular saw: POWERSTATE brushless motor provides increased cutting speed and power through the toughest applications M18 FUEL 1/2 in. mid-torque impact wrench with friction ring delivers the best power to weight ratio, most access in tight spaces, and faster removal speed, it provides 650 ft. lbs. of nut-busting torque and only weighs 5.1 lbs..
  • 4-1/2 in./5 in. grinder with paddle switch: POWERSTATE brushless motor delivers maximum s....
Check Stock

BOSCH GXL18V-240B22 18V 2-Tool Combo Kit with 1/2 In. Hammer Drill/Driver, 1/4 In. and 1/2 In. Two-In-One Bit/Socket Impact Driver and (2) 2.0 Ah SlimPack Batteries

  • BRUSHLESS 18V COMBO KIT: Includes two tools (impact driver and hammer drill) for power, with two SlimPack 2.0 Ah batteries.
  • HALF DRIVER, HALF WRENCH: Features a 1/4 In. quick-change hex shank and a 1/2 In. square drive, for either bits or sockets.
  • POWERFUL HAMMER DRILL/DRIVER DESIGN: Made with a brushless motor to deliver runtime and power for tough applications.
  • POWERFUL EC BRUSHLESS MOTOR: Both impact driver and hammer drill have EC Brushless motors for superior efficiency.
  • UPGRADED METAL CHUCK: Featured on hammer drill/driver for greater durability, with greater power transfer.
Check Stock

Bosch GDX18V-1800CB15 18V Brushless Impact

  • Versatile two-in-one impact driver and impact wrench design – features a versatile hex shank with power Groove and a socket drive.
  • Powerful EC Brushless motor – delivers a max of 1, 800 in.-Lbs. Of torque and up to 4, 200 IPM for professional power.
  • CORE18V battery – provides next-gen li-ion 21700 Cell technology in a lightweight, high-power battery with optimal performance.
  • Electronic cell and motor protection – helps protect the tool and battery from overloading conditions.
  • Half driver, half wrench – features a 1/4 in. Quick-change hex shank with power Groove and a 1/2 in. Square drive, for using either bits or sockets.
Check Stock