Reviews Motherboard Connector

5DN3X Dell Studio XPS 9100 Intel Desktop Motherboard s1156, MIX58EX

  • **Note: The Dell Motherboard Part Number G3HR7 and the T568R both fit the Dell XPS 8100. They are the same in every aspect with the exception of one thing. The mounting design for the heatsink are different. On the G3HR7 Motherboard the Heatsink mounts via threaded screws, on the T568R the mounting is via plastic tabs that press into the motherboard. One with not fit the other. We have found the correct heatsink for the G3HR7, that is being sold here, is the Dell F2K99..
  • Chipset: Intel H57, Known Supported Processors (and Similar): Socket Type: LGA1156, Intel Core i7-870, Intel Core i7-860, Intel Core i7-750, Intel Core i5-670, Intel Core i5-661, Intel Core i5-660, Intel Core i5-650, Intel Core i3-540, Intel Core i3-530.
  • Supported Memory: Connectors four internally-accessible DDR3 DIMM sockets Capacities 1 GB, 2 GB, and 4 GB Memory type 1066-MHz or 1333-MHz DDR3 DIMM.
  • non-ECC memory only Memory configurations possible 4 GB, 6 GB, 8 GB, 12 GB, and 16 GB (64-bit operating system), Audio: Integrated 7.1 channel, High Definition audio with S/PDIF support.
  • Video: Intel Graphics Media Accelerator HD, Expansion Capabilities: PCI one 124-pin connector, PCI Express x1 two 36-Pin Connectors, PCI Express x16 one 164-Pin Connector.
Check Stock

4 GB Dell New Certified Memory RAM Upgrade for Dell Studio XPS 7100 Desktops SNPP382HC/4G A2507437 A3944748

  • **Note: The Dell Motherboard Part Number G3HR7 and the T568R both fit the Dell XPS 8100. They are the same in every aspect with the exception of one thing. The mounting design for the heatsink are different. On the G3HR7 Motherboard the Heatsink mounts via threaded screws, on the T568R the mounting is via plastic tabs that press into the motherboard. One with not fit the other. We have found the correct heatsink for the G3HR7, that is being sold here, is the Dell F2K99..
  • Chipset: Intel H57, Known Supported Processors (and Similar): Socket Type: LGA1156, Intel Core i7-870, Intel Core i7-860, Intel Core i7-750, Intel Core i5-670, Intel Core i5-661, Intel Core i5-660, Intel Core i5-650, Intel Core i3-540, Intel Core i3-530.
  • Supported Memory: Connectors four internally-accessible DDR3 DIMM sockets Capacities 1 GB, 2 GB, and 4 GB Memory type 1066-MHz or 1333-MHz DDR3 DIMM.
  • non-ECC memory only Memory configurations possible 4 GB, 6 GB, 8 GB, 12 GB, and 16 GB (64-bit operating system), Audio: Integrated 7.1 channel, High Definition audio with S/PDIF support.
  • Video: Intel Graphics Media Accelerator HD, Expansion Capabilities: PCI one 124-pin connector, PCI Express x1 two 36-Pin Connectors, PCI Express x16 one 164-Pin Connector.
Check Stock

OwlTree 2 Pack EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male Power Supply Extension Cable EPS 12V for Motherboard 10.6 inch

  • Compatible: work with motherboard with ATX 4 pin, 8 pin or 8+4 pin ports.
  • Connector A: EPS 12V 8 Pin CPU Female Connector. Connector B: ATX 12V 8 Pin (4+4 Detachable) Male Connector. Connector C: ATX 12V 4 Pin Male Connector.
  • Length: 10.6inch/27cm, UL1007 18AWG, 34*0.178TS Tinned Copper Wire, Higher Quality than Regular Cable.
  • Solution: The CPU 8 Pin Female to CPU 8 Pin (4+4) +4 Pin Male Cables provide a good solution for the motherboard required 8+4 pin ATX ports,Compatibility: Compatible with all PSUs - ATX, SFX, Fanless PSU.Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket..
  • This cable only works with motherboard, not PCI-Express video cards. Serious damage can be caused if your use it in place of PCI-Express video cards..
  • Package: 2 Pack EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male CPU Power Adapter (10.6in).
Check Stock

Intel Chipset Q270 Socket LGA1151 Desktop Motherboard NW6H5 0NW6H5 CN-0NW6H5 for Dell OptiPlex 7050 Small Form Factor Series

  • **Note: The Dell Motherboard Part Number G3HR7 and the T568R both fit the Dell XPS 8100. They are the same in every aspect with the exception of one thing. The mounting design for the heatsink are different. On the G3HR7 Motherboard the Heatsink mounts via threaded screws, on the T568R the mounting is via plastic tabs that press into the motherboard. One with not fit the other. We have found the correct heatsink for the G3HR7, that is being sold here, is the Dell F2K99..
  • Chipset: Intel H57, Known Supported Processors (and Similar): Socket Type: LGA1156, Intel Core i7-870, Intel Core i7-860, Intel Core i7-750, Intel Core i5-670, Intel Core i5-661, Intel Core i5-660, Intel Core i5-650, Intel Core i3-540, Intel Core i3-530.
  • Supported Memory: Connectors four internally-accessible DDR3 DIMM sockets Capacities 1 GB, 2 GB, and 4 GB Memory type 1066-MHz or 1333-MHz DDR3 DIMM.
  • non-ECC memory only Memory configurations possible 4 GB, 6 GB, 8 GB, 12 GB, and 16 GB (64-bit operating system), Audio: Integrated 7.1 channel, High Definition audio with S/PDIF support.
  • Video: Intel Graphics Media Accelerator HD, Expansion Capabilities: PCI one 124-pin connector, PCI Express x1 two 36-Pin Connectors, PCI Express x16 one 164-Pin Connector.
Check Stock

PWM Fan Extension Cable | PC Cooling Fan Power Extension Cord | Compatible with ATX Case 3 Pin & 4 Pin Cooling Fans | 10.5" Black Durable Nylon Braided Cable (4 Pack)

  • ✔PC FAN EXTENSION CABLE 4 PIN AND 3-PIN✔ Our PWM fan splitter cable for PC motherboard cooling fans are constructed using high-quality nylon and cable is strongly braided to provide long-lasting performance as well as to avoid dust and breakage..
  • ✔CASE FAN EXTENSION CABLE✔ The PWM fan cable is designed with the capability of expanding one motherboard PWM fan header to support internal cooling fans to reduce the load on the motherboard..
  • ✔FAN SPLITTER CABLE WITH MANY FUNCTIONS✔ The 4pin PWM to 3pin standard fan adapter cable provides better power supply for motherboard fans, supports PWM function, speed regulation, and satisfies all your control needs to increase the lifespan of the motherboard..
  • ✔CASE FAN POWER SPLITTER FOR 3-PIN AND 4-PIN✔ The PWM cable extension is mostly compatible with 4-pin and 3-pin PC case motherboard cooling fans.
  • the extension cord ergonomic design offers you a greater flexibility between motherboard and CPU cooling fans..
  • ✔CPU FAN EXTENSION CABLE 3 PIN AND 4-PIN COMPATIBLE✔ The connector types of PWM fan extension cable includes one 4-pin Female plug connector and one 4-pin Male plug connector.
  • it is designed for enthusiasts with need for controlling numerous system fans..
Check Stock

Winncon PWM Fan Splitter Cable 1 to 2 Converter, Black Case Fan Splitter Cable, Case Fan Power Duplicator Converter, Dual Case Fan Power Adapter, 10.6 inch (1 Pack)

  • ❤One Divinded into Two: one 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
  • and one 3 pin fan connector omits the RPM signal pin for tandem fan speeds with both fans.
  • ❤Keep Same Speed: 4-Pin receptacle connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using software from a motherboard equipped with PWM control.The fan adapter is compatible with 3-pin and 4-pin PC fans..
  • ❤Increase Airflow: This PWM fan splitter cable connects 2 computer case fans to a single motherboard fan header to increase airflow in your computer case, adding ventilation and regulating the fan speed in a computer case ..
  • ❤High quality: The cooling fan cable is covered with fine plastic for long-term years’ use. High quality high density black sleeved able, 24AWG, and the length is about 10.6 inch (27cm)..
  • ❤This Dual Case Fan Power Adapter is compatible with popular brands of computer case cooling fans, and can be used for a motherboard 4pin interface powering for multiple cooling fans and PWM speed control, lengthen and extend the motherboard 4-pin interface..
Check Stock

Cable Matters 2-Pack 3 Way 4 Pin PWM Fan Splitter Cable - 12 Inches

  • 4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header.
  • PWM splitter cable connects an additional fan to increase airflow in your computer case.
  • Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans.
  • PC fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 3 PWM fans.
  • PWM fans can spin at the same speed using software from a motherboard equipped with PWM control.
  • CPU fan splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other 2 fans.
  • 3 pin fan connector omits the RPM signal pin for tandem fan speeds with all 3 fans when supported by your computer and fans.
  • Cost-effective 2-pack of computer fan splitter cables provides a spare cable for a adding a fan to increase cooling in your computer.
  • Sleeved and wrapped black 12-inch case fan splitter cable provides a tidy look in an open computer case.
  • 3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
  • Add more cooling to your computer with t....
Check Stock

Dell NH493 Power Supply for Dimension E521/E520 Desktop (L305P-01) (Renewed)

  • P3 and P5 - 4-pin SATA standard power connector.
Check Stock

Cooler Master ARGB LED Controller with 4 x 3-Pin Ports - Multiple Colour Effects, Thermal Detection Mode, 4-Pin RGB Device Compatible

  • VERSATILE SYSTEM HUB - Can connect to either 4-Pin RGB or 3-Pin ARGB compatible motherboards (ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light or ASRock Polychrome) or function as an independent controller instead..
  • SPECTACULAR LIGHTING EFFECTS - Features include interchangeable RGB/ARGB lighting control, multiple LED modes, as well as colour and speed adjustments..
  • BROAD COMPATIBILITY - The Cooler Master ARGB Controller includes a fan-signal wire, case-restart wire, motherboard restart wired, 4-Pin RGB connector, 4-Pin motherboard connector, USB header connector, USB adapter, ARGB 3-Pin motherboard connector, thermal detection wire, and 4 ARGB 3-pin connectors.
  • THERMAL DETECTION FUNCTION - When connected via the thermal detection cable, real-time temperatures can be monitored and displayed through colour lighting effects..
  • IN-FRAME MAGNETS - The slim case can be attached to any metallic surface..
Check Stock

Genuine Dell M1J3H 525w Watt Power Supply PSU for Precision T3400 Systems Compatible Part Numbers: M1J3H, 7JVXX, D525AF-01

  • Genuine Dell M1J3H 525w Watt Power Supply PSU For Precision T3400 Systems.
  • Connectors: P1 - 24-pin ATX Motherboard Power, P2 - 8-pin Motherboard Power Connector, P3 - 4-pin SATA Standard Power Connector, P4 - 4-pin SATA Standard Power Connector, P5 - 4-pin SATA Standard Power Connector, P6 - 4-pin SATA Standard Power Connector, P7 - 4-pin SATA Standard Power Connector, P8 - 6-pin Video Power Connector, P9 - 6-pin Video Power Connector, P10 - 2-pin Adapter Power Connector, P11 - 4-pin Floppy Power Connector.
  • Compatible Part Numbers:M1J3H, 7JVXX, D525AF-01.
Check Stock

FBHDZVV 4Pin PMW Fan Splitter Cable to 3Pin/4Pin PC Case Fan Sleeved Adapter Cable 1 to 3 PMW Fan Splitter Extension Power Cable Splitter Y Power Adapter Cable PC Computer Cooling Fan Wire Connector

  • The PWM molex fan extension cable for PC motherboard cooling fans are constructed using high-quality material, 10.5 inches cable is strongly braided, sleeved and wrapped to provide long-lasting performance as well as to avoid dust..
  • The PC case fan sleeved adapter cable is designed with a 4-pin (Actual 2-Pin) mol-ex connector on the one end and on the other end it splits into 3 X 3/4-pin connector, the ergonomic design of the extension cord offers you a greater flexibility to position your PWM or fans inside your internal case..
  • The molex fan connector types of PWM fan extension cable includes one 4-pin(Actual 2-Pin) molx connector and 3/4-pin male plug connector. Please note this 4-Pin Molex is actual 2-Pin but it still works fine on your computer..
  • Motherboard 4-pin interface, PWM speed control, can be used for multiple cooling fans, expand and expand motherboard 4-pin interface suitable for CPU or computer chassis fan..
  • Molex fan splitter easy to plug, the fan extension cable offers greater flexibility between motherboard and CPU cooling fans.Easily realize the parallel connection of 4-pin PWM temperature-controlled fans, so that the fans can achieve a quieter effect and better heat dissipation..
Check Stock

LINKUP - [Active Chip] USB 3.0 (3.1 Gen 2) Internal IDC 20 Pin Motherboard Header to A-Key (Type-E) 20 Pin Female Converter for Type C Panel Mount Adapter

  • Installation Note *** USB power will always be on even when the system is shut down. Please unplug the PC power cable completely for 20 seconds before installation to avoid possible voltage spikes which may damage the chipset on the adapter. This adapter is designed to fit all USB 3.0 20 pin motherboard headers by standard specification. A small number of motherboards do not use standard USB 3.0 20 pin headers which may cause the adapter to get stuck in the socket..
  • …Forceful removal of the adapter may cause the header socket to be damaged, LINKUP is not responsible for such damage. Connector 1 (Motherboard) - USB 3.0 Internal IDC 20 Pin MB Male Housing Header. Connector 2 (Front Panel) - USB 3.1 A-Key 20 Pin Front Panel Female Header / NOTE: Does not convert from 5GB/s to 10GB/s. Not compatible with USB 2.0 motherboard IDC connector.
  • Active chipset enables full USB-C features, preserves the functions of Channel Configuration pins (CC1&CC2).
  • including attach/removal detection, plug orientation detection, and current advertisement. Also the communications required by the Power Delivery and Alternate Mode..
  • Recommended to be used with LINKUP - USB-C Type Panel Cable Mount Motherboard Header Extension Adapter (B07THC8ZVF). May not fit ITX motherboard in ....
Check Stock

Cable Matters 2-Pack ATX Power Supply 4-Pin CPU Extension Cable - 8 Inches

  • PSU to mobo CPU extension cable lengthens the connection between an existing power supply and the P4 connection on a motherboard.
  • 4 pin CPU extension cable extends the power connector from a 12V ATX power supply to a motherboard CPU power connection.
  • Cable management solution for connecting an older power supply to a new motherboard in a bottom mount computer case.
  • PC builder essential cable for ATX power supplies that ship with a short 4 pin CPU power cable.
  • Cost-effective 2-pack provides a spare cable to keep in your toolkit.
  • Sturdy ATX PSU extension cable has a male 4-Pin P4 connector and a female 4-pin P4 connector with latches for a secure connection to prevent accidental disconnections.
  • Compatible with popular ATX power supplies such as the Antec Basiq BP350 350 Watt Power Supply, Logisys Corp. 480W 240-Pin Dual Fan 20+4 ATX Power Supply, Rosewill 350-Watt Power Supply.
Check Stock