Reviews Mother Board Ic Chip

uxcell 17pcs DIP IC Chip Socket Adaptor Round 28 Pin 2.54mm Pitch Dual Row 15.24mm Row Pitch

  • Row to Row Distance(Approx):15.24mm/ 0.6".
  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

uxcell 20pcs DIP IC Chip Socket Adaptor Solder Type 2.54mm Pitch Dual Row 8 Flat Pin 7.6mm Row Pitch

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

Deal4GO M92T36 USB-C Power Charging Control IC Chip Replacement for Nintendo Switch Motherboard

  • For use with the Switch Console only, Found Part number on chip: M92T36..
  • If your switch cannot turn on, then the control IC M92T36 in the mother board may be broken..
  • The M92T36 IC is usually replaced to fix a Switch which had this power management chip damaged, usually by a third-party dock or charger..
  • This item is supplied to professionals, Therefore, Technical disassembly and installation required..
  • Each pack come with 1 x M92T36 USB-C Power Charging Control IC Chip.
Check Stock

Bitray Professional Tool Chip Extraction Tool PLCC IC Extractor Chip Spring Assisted Extractor Puller Removal Puller Tool

  • Package includes: U Type IC Chip Extractor x 1 + PLCC IC Chip extractor x 1..
  • The U-shaped IC extractor is used to pull out the IC chip on the circuit board. It is easy to use and simple. It is an ideal tool for families and students to do experiments..
  • PLCC IC chip extractor is a spring-assisted extraction tool, specially designed to remove PLCC..
  • The body is made of stainless steel, and there is a PVC insulation package outside to prevent static electricity from damaging the IC components..
  • It is very suitable for professional maintenance personnel, such as TV/DVD/PC maintenance personnel or IC workers..
Check Stock

Liyafy PLCC IC Chip Extractor Motherboard Circuit Board Component Puller and U Shape IC Chip Extractor Puller ROM Extraction Tool Kit

  • U shape IC extractor is used for pulling ic chip on circuit board. Handy Tool..
  • PLCC IC Chip extractor is spring assisted extraction tool designed for removal of PLCC..
  • Package includes: 1, U shape extractor x1.
  • Adopt and metal and shielded plastic to avoid static charge damage IC components..
  • Perfect for professional repair man, such as TV/DVD/PC repairman or IC workers..
Check Stock

LCD Touch Panels Touchpanel Analog For DOGS102 (EA TOUCH102-1)

  • 2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
  • With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch)..
  • This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
  • On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
Check Stock

Ili9341 LCD Display Module, ILI9341 5V/3.3V 2.8\ TFT SPI Serial Port LCD Touch Panel Display Module, 240x320[with Touch(9 IO Drive)](Without Touch)

  • With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch). 2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
  • This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
  • On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
  • Buy it Confidence: Let you feel safe using, so you have a better using experience. Great value for money. If you have any problems, please fell free to contact us anytime. Our team w....
Check Stock

Gikfun Keycap Puller Antistatic Clip Pliers Switches Circuit Board PCB IC Chip Puller Removal Tool EK1830

  • This clip combination can help you easily remove keycaps, IC chips, switches, etc..
  • Antistatic Clip Pliers Circuit Board PLCC PCB IC Chip Extractor Removal Tool for Arduino.
  • This U type IC extractor is used for pulling integrated block, which is a convenient and professional tool for students to have experiments..
  • The keycap puller holds up to 3 keys to speed uo key removal, compatible with most mechanical keyboards including Cherry MX,Alps,and topre switches.
  • Stainless steel main body covered with PVC insulated enclosure..
Check Stock

Acogedor 2.8 Inch TFT SPI Serial Port LCD Touch Panel Module ILI9341 240x320 5V/3.3V (without touch)

  • ?2.8 inch color screen, support 65K color display, and the display is colorful.
  • ?With PCB board (including power supply IC, touch IC, SD cardcage) compatible 5110 interface.
  • ?At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch).
  • ?This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution.
  • ?The module is equipped with voltage stabilized IC to support 3.2v /5V power supply.
Check Stock

Treedix USB to TTL Converter CH340 Module 3.3V/5.5v Serial Converter Development Tool with Micro USB Adapter for Arduino

  • Serial Basic Breakout Board CH340G serial signal serial ic breakout development board usb micro b connector save space diy electronics projects micro b cable jumper wires.
  • Base on USB converter IC CH340G, there is a wide range of operating systems . You may need to install drivers the first time you connect the chip to your computer's USB port or when there are operating system updates..
  • The output voltage is 3.3v by default, there is a 3.3v signal, it can also be changed to 5V, changing to 5V will cause the board to output 5V and 5V signals on the VCC pin(3 .3v to 5V by a short circuit selection).
  • There are two LEDs on the board connected to TX (green) and RX (yellow) for faster viewing of serial traffic.
  • Suitable for: Arduino Pro Mini, our GPS module, cellular module and many other devices that use serial communication.
Check Stock

LCD Display Module - 2.8 Inch TFT SPI Serial Port LCD Touch Panel Module ILI9341 240x320 5V/3.3V(带触摸最少9个IO驱动)

  • With PCB board (including power supply IC, touch IC, SD cardcage) compatible 5110 interface.
  • At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch).
  • This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution.
  • The module is equipped with voltage stabilized IC to support 3.2v /5V power supply.
  • 2.8 inch color screen, support 65K color display, and the display is colorful.
Check Stock

Hilitchi Integrated Circuit Chip Assortment Kit with Sockets opamp oscillator pwm PC817 NE555 LM358 LM324 JRC4558 LM393 LM339 NE5532 LM386 TDA2030 TDA2822 PT2399 UC3842 UC3843 ULN2003 169

  • ✅Durable material: Surface plated with nickel, which is not easy to rust and ensure a long service life..
  • ✅Many values, with 17 types for your choice. Clear Mark, easy to identify the models, enough quantity for your IC chip work..
  • ✅169CS IC chip kit: LM324 - 5Pcs, LM358 - 10Pcs, LM386 - 10Pcs, LM393 - 10Pcs, UA741 - 10Pcs, NE5532 - 10Pcs, NE555 - 10Pcs, PC817 -10Pcs, ULN2003 - 5Pcs, ULN2803 - 5Pcs..
  • ✅Used with circuit board: choose the appropriate model you need and install it in the right position..
  • ✅We offer a variety of useful IC types for your daily assembly application, such as precision timers, dual operational amplifiers, audio amplifiers, darlington arrays, quad operational amplifiers, etc. Also, you could DIY your own circuit boards..
Check Stock

Siglent Technologies SDG1062X Series Dual-Channel Function/Arbitrary Waveform generators

  • 【Specifications】Voltage Supply: 9-12V DC Input.
  • Input Distortion: less than 1% (at 1KHz).
  • 【welding steps】The welding installation considerations, follow these steps: First,the components are welding the front board, from low to high principles, namely the first low welding components, such as, capacitor, resistor, diode, etc.Then welding IC socket, terminal blocks, finally power socket, adjustable potentiometer..
  • 【Debugging steps】After completion of welding on IC, XR2206, you need to pay attention to the direction of IC, or insert the might damage the chip! Check IC for errors, if any, please correct in time..
  • 【Power】 Insert the power supply, power supply for 5.5 x 2.1 port, inside and outside is negative polarity.
  • Fitting for 9-12 v power supply voltage, and the waveform may not be stable for more than 12V..
  • 【Please note】these are DIY kits, you need to follow the welding steps in our description and complete the final installation..
Check Stock