Reviews Monstrum Tactical Rifle Scopes
Monstrum Tactical Scope Ring Set for Picatinny/Weaver Rails | 1 inch Diameter | Low Profile
- 1 inch diameter scope rings for mounting standard 1 inch diameter tube rifle scopes.
- Mounts to any flat top Picatinny or Weaver rail equipped rifle.
- High profile in height, 0.185 inches from base of mount to bottom of rings.
- Light weight 6061 aerospace aluminum construction.
- All Monstrum Tactical mount and accessory products come with a lifetime guarantee.
Check StockMonstrum Blackbird 3X Prism Scope | Black
- With a glass prism optic system the Monstrum Blackbird gives you true 3x magnification with crisper optics in a smaller package than traditional refracting lens rifle scopes.
- The etched glass reticle illuminates in both red and green for a clean sight picture regardless of lighting or environment, visible with or without battery powered illumination source.
- The single piece machined aluminum body is built with fewer moving parts and less points of failure to hold zero against the fiercest of recoil.
- At 15 ounces with a newly designed lightweight 6061 aluminum scope body, the P332 Raven is out lightest prism scope to date..
- All Monstrum scopes are backed by a one year warranty..
Check StockMonstrum P330-B Marksman 3X Prism Scope (Black)
- Next generation prism sight with 3x magnification and 30mm objective lens, for lightning fast target acquisition out to 300 yards.
- Features a glass prism optical system rather a refracting lens system like traditional scopes, allowing for better optical quality in a much smaller package..
- Unlike red dots, the reticle is visible with or without illumination, for a clean sight picture regardless of lighting or environment..
- Brand new single piece machined aluminum design, sturdier and more rigid than ever, guaranteed to hold zero against the strongest of recoil.
- All Monstrum Tactical Rifle Scope products are backed by a one year warranty..
Check StockMonstrum Lockdown Series Lightweight Riser Mount | High Profile | 5.5 inch L / 13 Slot
- Single piece machined aluminum with a hollow body profile, designed to shave precious ounces of weight off your rifle build.
- Redesigned locking nut fastens securely via hand, screwdriver, or wrench and is guaranteed to hold zero against the heaviest of recoil.
- 5.5 inches in length with 13 Picatinny rail slots, accepts all Picatinny or Weaver based scopes, red dots, or optics.
- High profile mount provides 0.92 inches of rise.
- All Monstrum Tactical Lockdown Series Riser Mounts come with a lifetime warranty.
Check StockHIRAM Cantilever Scope Ring Mount for 1' and 30mm Rifle Scopes with 2 Slot Raised Picatinny Rail Mounts, Adjustable Cantilever Mount
- FITS 1-INCH & 30MM SCOPES: This dual ring mount by Hiram fits pistol and rifle scopes with 30mm diameter tubes but includes gaskets to securely handle 1-inch scopes as well.
- the cantilever design allows scopes to be placed up to 2 inches forward for better eye relief and a fuller field of view.
- ROCK-SOLID BUILD: Our aircraft-grade 6061-T6 aluminum alloy offers superior strength and corrosion resistance while remaining a lightweight 11 ounces.
- the heat-treated torx screws lock this mount firmly into any 20mm Picatinny or Weaver rail.
- RINGTOP MOUNTS: The rings on this cantilever scope mount each include a 2 slot 20mm rail to easily attach additional targeting accessories like lasers, tactical flashlights, and red dots.
- HIGHLY ADJUSTABLE: This rifle scope mount's rings can also be adjusted forward or backward to any of seven 10mm (0.4") increments to fit all your favorite rifle scopes for hunting, shooting, tactical training, and more.
- SATISFACTION GUARANTEED: Our scope mount has been rigorously tested to ensure its effectiveness and provide the highest-quality firearm accessory on the market.
- we back it with our usual strong warranty and friendly 24/7 customer service so you can be sure you'll enjoy its use for years to come!.
Check StockMonstrum S330P 3X Prism Scope | RM5-AH Adjustable Height Riser Mount with Quick Release | Monstrum Flip Up Lens Cover Set | Bundle
- Compact yet heavy duty prism sight with 3x magnification and 30mm objective lens, Ideal for rapid mid range target acquisition out to 500 yards..
- Features a glass prism optical system rather a refracting lens system like traditional scopes, allowing for better optical quality in a much smaller package..
- Unlike red dots, the reticle is visible with or without illumination, for a clean sight picture regardless of lighting or environment..
- Product bundle includes Monstrum Lockdown Series RM5-AH Picatinny riser mount with quick release and adjustable height design allowing for optimal placement of your optic based on rifle setup or preferred cheek weld.
- Product bundle includes a matching set of Monstrum Rubberized Flip Up Lens Covers. Spring loaded flip-up lens covers that rubberized sleeves that conform neatly around your rifle scope tube, protecting your expensive optics from dust and abrasion.
Check StockMonstrum High Profile Picatinny Riser Mount (1' H x 5.7' L), for Scopes and Optics
- 1-inch-high riser mount for scopes and optics, allows for sight clearance over front sights.
- 5.7 inches in length, Picatinny rail mount, will accommodate all Picatinny or Weaver standard scopes, red dots, and optics.
- See through design for use with iron sights.
- Sturdy and lightweight, 6 ounces in weight, crafted from aircraft grade aluminum.
- All Monstrum Tactical mount and accessory products come with a lifetime guarantee.
Check StockMonstrum One Piece Scope Mount for Marlin 336/1894/1895 Series Lever Action Rifles | Low Profile | 1 Inch Diameter
- Dedicated scope mounting platform built specifically for Marlin 336/1894/1895 Series lever action rifles.
- Rings are 1 inch in diameter for precision mounting of standard 1 inch tube rifle scopes.
- Scope mount base installs directly to the Marlin factory mounting holes via the included set screws with no additional mounting hardware required.
- Note that the low profile design may not accommodate scopes with large objective bells and that installation may require removal of your rear sight. Please measure scope mount dimensions against your scope before purchasing..
- All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check StockMonstrum 1-4x20 LPVO Scope with MH255 Offset Scope Mount and Flip Up Lens Covers | Black
- Tactical rifle scope providing crystal clear targeting at 1-4x magnification, with a 20mm objective diameter and an eye relief of 3.5-3.8 Inches.
- Glass rangefinder reticle for on-the-fly range estimation and long distance targeting.
- Lever controlled reticle illumination in both red and green with multiple brightness intensities.
- Product Bundle includes Monstrum H-Series One Piece Offset Scope Mount.
- comparable in weight to a pair of scope rings while maintaining the added rigidity and convenience of a one piece mount.
- Includes hardened steel Torx mounting hardware for mounting to any Picatinny rail platform..
- Product bundle includes a matching set of Monstrum Rubberized Flip Up Lens Covers. Spring loaded flip-up lens covers that rubberized sleeves that conform neatly around your rifle scope tube, protecting your expensive optics from dust and abrasion.
Check StockMonstrum Precision Picatinny Scope Rings | 1 inch Diameter | 0.80 inch Height
- 0.80 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
- Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek....
- 1 inch diameter rings for mounting standard 1 inch rifle scope tubes.
- Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts.
- Available in four heights to match your needs: 0.80 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check StockMonstrum Scope Mount with 45 Degree Offset Picatinny Rail Mount | 30 mm Diameter
- Dual ring scope mount for 30 mm tube scopes tubes with integrated 45 degree offset picatinny rail mount.
- 45 degree offset rail mount allows for mounting of secondary sighting system for use at closer ranges.
- Mounts to any flat top Picatinny rail equipped rifle platform.
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position.
- Monstrum mount and accessory products come with a lifetime guarantee.
Check StockMonstrum Precision Picatinny Scope Rings | 1 inch Diameter | 1.00 inch Height
- 1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
- Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
- 1 inch diameter rings for mounting standard 1 inch rifle scope tubes.
- Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts.
- Available in four heights to match your needs: 0.80 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check StockMonstrum Precision Picatinny Scope Rings | 1 inch Diameter | 1.20 inch Height
- 1.20 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
- Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
- 1 inch diameter rings for mounting standard 1 inch rifle scope tubes.
- Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts.
- Available in four heights to match your needs: 0.80 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock