Reviews Monochrome Screen

Jewellery From Art Nouveau to 3D Printing

  • 6.23" Large Screen: Photon Mono 4K Resin 3D Printer is upgraded to a 6.23" Monochrome LCD screen, 29% larger than ANYCUBIC Photon's 5.5" screen. Rapid....
  • Large Build Volume: ANYCUBIC Photon Mono 4K has a large printing size of 132mm x 80mm x 165mm /5.19" x 3.14" x 6.49", which leaves sufficient printing....
  • 4K High Resolution: The 4K Monochrome LCD Screen has a HD resolution of 3840 x 2400, 35um XY pixels and 7% light transmittance, which means you can....
  • Fast Printing Speed: ANYCUBIC Photon Mono 4K Resin 3D Printer's max printing speed can reach 50mm/h, it only takes 2.5 hrs to print a 12cm / 4.7in....
  • Universal Compatibility: Photon Mono 4K is compatible with most 3d printing resin on the market, you can get the best printing effect with ANYCUBIC 3D....
Check Stock

KOYOFEI 3PCS Mono LCD Screen Tempered Glass Protective Film for 8.9‘’ Resin 3D Printer, High Light Transmittance Protective Film for Elegoo Saturn/Saturn S/Mono X194x122x0.33mm

  • The light transmittance of the tempered film is 95%, which will not affect the light of the monochromatic screen to cure the resin in the resin tank through the tempered film..
  • With good protection, the tempered film can not only protect the monochrome screen from being scratched by sharp objects in daily use, but also prevent the resin from leaking and polluting the screen from the damage of the release film..
  • Size: 194x122x0.33mm, perfect for 8.9-inch monochrome screens, compatible with ELEGOO Saturn, Saturn S, Mono X, Creality Halot Lite and other resin 3D printers with 8.9-inch screens..
  • Easy to use, the back of the tempered film is covered with a protective film. Please keep the screen clean before use, then remove the back protective film and install the tempered film on the monochrome screen. Use a plastic scraper to avoid air bubbles. After the installation is completed, please use cleaning fluid and The non-woven fabric wipes the tempered film clean..
  • Small Tips:The tempered film has a thickness of 0.33mm. In order to avoid printing problems, it is recommended to level the 3D printer again after installing the tempered film..
Check Stock

NOVA3D Whale 2 LCD 3D Printer 8.9 inch 4K Monochrome Screen Resin Large Build Volume 192mm L x120mm W x250mm H Wi-Fi Printing Red

  • 【Faster printing speed & Large build size】The Whale 3D printer has 8.9 inch Monochrome Screen, which to reduces layer printing speed to 2~2.5....
  • 【HD 4K Monochrome】With 4K HD resolution 3840*2400 pixels greatly improve the model surface result. 40 leds provide uniform light for the full....
  • 【Higher precision and great stability】Dual Z-Axis linear guide and steel-ball bearing slide block. All rigid metal body and CNC parts ensures....
  • 【User-friendly Design】Permanent leveling design, air filtration system, resin Vat handle, Wi-Fi printing, 8 GB built-in data disk, which makes....
  • 【Warranty and Service】 We could provide 1 year warranty and technical support for Whale2. Also 6 months warranty for 4K Monochrome Screen. Any....
Check Stock

ELEGOO Saturn 8K MSLA Resin 3D Printer and ELEGOO Mercury XS Bundle with Separate Washing and Curing Station

  • ... Printing: ANYCUBIC Photon Mono X 6K 3d printer has a max print volume of 9.6 x 7.8 x 4.8 inches. The large volume can not only print multiple models at a time, effectively improve work efficiency, but also fully meet the needs of printing large-size models..
  • 9.25" 6K Monochrome Screen: The 9.25" resin 3d printer 6K screen has 5760 x 3600 Px, and ultra-high resolution brings vivid details. The life of the monochrome screen is 4X longer than that of the ordinary LCD screen. Added replaceable scratch resistant film, which greatly reduces the damage rate of the LCD screen..
  • Powerful UV Light Source: The Photon Mono X 6K 3d printer with 40 bright LED lamp beads, the newly upgraded 40 LED matrix parallel UV light source, the strong light source distribution is more uniform, so that Anycubic Photon Mono X 6K 3d resin printer can quickly and accurately display the details of each part of the model, showing high quality models..
  • High Light Transmittance & Fast Printing: The fast LCD 3D printer using the industry-leading 6% light transmittance screen, the printer's fastest printing speed can reach 1s/layer, w....
Check Stock

WESIRI Ambient TV Kit for 60-75 inch HDMI Devices Dream Screen 4K HDTV Computer Backlight Background Lighting USB WS2812B LED Strip Full Set

  • This is a kit to add ambient light to your TV, up to 75" - all required parts are included. It's designed for anyone who uses their TV with an external HDMI source. source..
  • Dynamic Light is displays the side colors of the screen, in realtime behind your TV. Ambient lighting can increase levels of immersion by syncing with what's happening on your screen..
  • Modes: Sync with screen, Sound and light rhythm, Soft lighting, Dream rainbow, Static monochrome, Monochrome breathing, Light chase..
  • The installation and setup takes only about 10 minutes and requires no expertise or a soldering iron, because everything is already wired and provided with plugs. Everything is already finished and ready to be mounted..
  • With such adaptive illumination, eyes become less tired when viewed in the dark, the presence effect is enhanced, the image viewing area extends, etc. to create an immersive multimedia experience. It is applicable not only to video and photo content, but also to games..
Check Stock

KOYOFEI 3PCS Mono LCD Screen Tempered Glass Protective Film for 6.08‘’ Resin 3D Printer High Light Transmittance Protective Film for Elegoo Mars 2/Mars 2 Pro/Photon Mono 133x85.5x0.33mm

  • The light transmittance of the tempered film is 95%, which will not affect the light of the monochromatic screen to cure the resin in the resin tank....
  • With good protection, the tempered film can not only protect the monochrome screen from being scratched by sharp objects in daily use, but also....
  • Size: 133x85.5x0.33mm, perfect for 6.08-inch monochrome screens, compatible with ELEGOO Mars 2 , Mars 2 Pro, Photon Mono, Photon Mono SE and other....
  • Easy to use, the back of the tempered film is covered with a protective film. Please keep the screen clean before use, then remove the back protective....
  • Small Tips:The tempered film has a thickness of 0.33mm. In order to avoid printing problems, it is recommended to level the 3D printer again after....
Check Stock

ANYCUBIC Photon Mono 4K 3D Printer, 6.23'' Monochrome Screen Upgraded LCD SLA UV Resin 3D Printers with Fast & Precise Printing and Large Printing Size 5.20''X3.14''X6.50''

  • [High-speed 3D Resin Printer]: ANYCUBIC Photon MONO 4K 3D printer is upgraded with 4k monochrome LCD with 35um XY pixels, is one of the greatest accuracies in 3D printing field. The 7% high light transmittance could absorb higher curing UV power for faster printing and curing speed, the single-layer exposure and curing time is as low as 1.5s. The printing speed can reach up to maximum 50mm/h. 2.5X faster than original 2k printer..
  • [4K High Resolution & Higher Accuracy]: This newly high resolution 3840×2400 MONO 4K resin printer has smaller pixel and sawtooth texture, to print more delicate and smooth surface.
  • and MONO 4K uses a high contrast ratio more than 350:1 monochrome screen, which makes the image in the exposure areas more accurate and produce highly-detailed prints with clearer and sharper edges and corners, thus improving the quality and success rate of printing, also greatly reducing the residue in resin vat..
  • [6.23″ Large Screen & Larger Print Size]: The Photon Mono 4K is equipped with a decent 6.23″ screen, which is 29% larger than the Anycubic Photon’s 5.5” in screen area. It can also print up to 6.5×5.2×3.1in at a time, which offers your creations more possibilities..
  • [Adjustable Power & Universal Compatibility]: With 30%-100% l....
Check Stock

ANYCUBIC Photon Mono 4K, Resin 3D Printer with 6.23' Monochrome Screen, Upgraded UV LCD 3D Printer and Fast & Precise Printing, 5.19' x 3.14' x 6.49' Printing Size

  • 6.23″ Large Screen: Photon Mono 4K Resin 3D Printer is upgraded to a 6.23″ Monochrome LCD screen, 29% larger than ANYCUBIC Photon’s 5.5″ screen. Rapid prototyping greatly improves printing efficiency by printing single layer in 1.5S. The LCD screen is more durable, 4X longer lifespan than RGB screen..
  • Large Build Volume: ANYCUBIC Photon Mono 4K has a large printing size of 132mm x 80mm x 165mm /5.19″ x 3.14″ x 6.49″, which leaves sufficient printing space and freedom for you to make any shapes of 3d models. The transparent top cover enables you to monitor the printing process while keeping 99.95% UV light blocking ratio, safe & easy for beginners..
  • 4K High Resolution: The 4K Monochrome LCD Screen has a HD resolution of 3840 x 2400, 35um XY pixels and 7% light transmittance, which means you can print all your models in a higher precision level. In addition, the contrast ratio is more than 350, making printing details more accurate and delicate, thus improving the printing quality and success rate..
  • Fast Printing Speed: ANYCUBIC Photon Mono 4K Resin 3D Printer’s max printing speed can reach 50mm/h, it only takes 2.5 hrs to print a 12cm / 4.7in model, 2.5X faster than regular resin printers. This 3d printer is an ideal choice for you to obt....
Check Stock

Old Crt Computer Monitor Smashed

  • Suitable for HAAS VF1 VF2 VF3 93-5220C 93-5222 93-5222A 28HM-NM4, supporting monochrome display..
  • Industrial LCD screen replaces CRT Monitor..
  • Plug and play (original screw hole, original signal and power interface)..
  • Convenient installation, stable operation and display effect..
  • Industrial-grade LCD screen, metal shell, good anti-interference and good heat dissipation effect..
Check Stock

ELEGOO Mars 2 Pro 3D Printer MSLA UV Resin 3D Printer with 6.08 inch 2K Mono LCD Speedy Printing and High Precision 5.1x3.1x6.3 inch Build Volume

  • ELEGOO Authorized Distributor – You will receive ELEGOO Mars 2 Pro set, 1-year warranty on the whole printer for quality problems, 6-month warranty....
  • Speedy Mono-LCD Printing – Equipped with 6.08 inches monochrome LCD of 2K HD resolution, ELEGOO Mars 2 Pro exposure time is as fast as 2 seconds per....
  • Sharp and Precise Details – Upgraded light source design provides more uniform UV distribution, combined with 2K mono LCD, making a higher level of....
  • Friendly Printing Experience –Build-in activated carbon reducing bad odor of resin, UV-blocking transparent top cover, simply multi-language....
  • Build to Last Longer – Main body of Mars 2 Pro is made of CNC machined aluminum, durable and solid. The Monochrome LCD screen excels RGB....
Check Stock

ION OMNI SCAN Stand-Alone Image and Slide Scanner

  • Scans all color or monochrome 35mm negatives &mounted slides.
  • Converts images to digital JPEG files to easily organize, view & share.
  • 9 megapixel & 5 megapixel modes for up to3648 x 2736 scans.
  • Full-color LCD screen for viewing converted pictures.
Check Stock

Flashforge Resin 3D Printer, Foto 13.3 Large LCD UV Photocuring Fast Printing with Quick Removable13.3 4K Monochrome Screen, Matrix UV LED Light Source, 292*165*400 mm Printing Size

  • 19L build volume: 292*165*400 mm. 4 times larger than that of other normal resin printers..
  • 4 times faster on printing: 4K monochrome screen allows light transmits efficiently so as to remarkably shorten the print time for molding and exposure..
  • Lifespan of 4K LCD screen increases by 20%: high-efficiency cooling system improves print quality and elongates the service life of the LCD screen..
  • Easy to disassemble and replace the LCD screen: the screen is set as a whole modular, which could be replaced as a whole..
  • Eliminating print layers: the industrial-grade dual linear ball screw ensures stable and accurate movement of the motor on Z-axis, eliminating print layers..
Check Stock

A61L-0001-0093 D9MM-11A 9inch Replacement LCD Monitor for FANUC CNC System DC24V CRT

  • Suitable for HAAS VF1 VF2 VF3 93-5220C 93-5222 93-5222A 28HM-NM4, supporting monochrome display..
  • Industrial LCD screen replaces CRT Monitor..
  • Plug and play (original screw hole, original signal and power interface)..
  • Convenient installation, stable operation and display effect..
  • Industrial-grade LCD screen, metal shell, good anti-interference and good heat dissipation effect..
Check Stock