Reviews Mono block

PRORECK PR-122M Complete 1500W Dual 12

  • Package Includes: (1) PRORECK PR-1500.1M 1500W Amplifier, (1) dual 12" Car Subwoofer, (1) Complete Amp Installation Wire Kit..
  • PRORECK PR-1500.1M Dual 12 Car Subwoofer enclosure system with matching mono block amplifier. 1500 watts peak power/ 400 watts RMS. The surface is high quality aviation grade tweed carpet and has embroidery. The angle is 15%, close to the perfect vehicle bass alignment. Frequency Response: 15Hz - 20kHz. Power Output: 200 Watts RMS Mono-block at 4 Ohms and 1% THD+N. 4-Ohm Mono-Block Class A/B. Dynamic Power: 400 Watts @ 2 Ohms..
  • This system includes a top-level Enclosure with more powerful and rich bass. It also includes a mono block bass amplifier. This mono amplifier is built just for loud bass.It feature high power 1.5" aluminum 4-layer voice coils with bumped and vented magnet motor structures among other features. It has efficient bass response with deep and clean sound..
  • Amplifier with full range RCA output, RCA line input, high level input, bass EQ, dashboard remote, etc, meet all your needs.And amplifier contains mute circuit, bass optimization circuit, protection circuit, thermal protection, speaker short circuit protection, input overload protection and DC offset protection,make users have a better experience. Rich wire....
Check Stock

Rockville RV12.2B 1200W Dual 12 Car Subwoofer Enclosure+Mono Amplifier+Amp Kit

  • Rockville RV12.2B 1200W dual 12" Car Subwoofer Enclosure amplifier+amp kit.
  • Rockville RV12.2B Dual 12” bass enclosure system with matching mono block amplifier. 1200 watts peak power/ 400 watts RMS cea-2031 rating. Dual 12” bass enclosure system with matching mono block amplifier. Quasi transmission Line cabinet design..
  • Angled at 15% for near perfect in vehicle bass alignment. Exterior: high quality aviation grade tweed Carpet. Oversize Rockville Shield embroidery. Mono, Gold-plated push style, speaker terminal. Dual, high-power, high-efficiency 12" Subwoofers..
  • 1200 watts peak power. Power output: 200 watts RMS cea-2006 power @ 4-Ohm and 97DBA (Reference: 1Watt into 4 ohms). Frequency Response: 15Hz - 20Khz (-3Db). RMS power: 400 watts @ 2 ohms. 4 ohm mono-block class A/B..
  • 17" High grade twisted pair 100% Copper RCA cables. 17' 8 gauge translucent Blue Super flex Power cable. 3' 8 gauge clear super flex ground wire. 17' 18 gauge Blue remote cable. 17' 16 gauge speaker wire. Gold Plated anl heat resistant fuse holder.
Check Stock

Rockville RV8.2A 800 Watt Dual 8\ Car Subwoofer Enclosure+Mono Amplifier+Amp Kit

  • Rockville RV8.2A Single 8" Bass Enclosure System With matching Mono Block Amplifier.
  • 800 Watts Peak Power / 250 Watts RMS CEA-2031 Rating.
  • Dual 8" Bass Enclosure System with matching Mono Block Amplifier.
  • Quasi Transmission Line Cabinet Design. Fully adjustable low pass crossover: 50Hz - 250Hz.
  • Bonded, Stapled and Braced 3/5" MDF Cabinet.
Check Stock

Parts Express Cast Frame #10-32 Speaker Mounting Kit

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound....
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16....
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
Check Stock

Memphis Audio MJP1222 12" 1500 Watt MOJO Pro Car Audio Subwoofer Bundle MJP1000.1 Car Amplifier Mojo Pro Amp & RWK4CU Complete Amp Installation Wire Kit OFC (3 Items)

  • ... Sub Vented: 4.6 cf, Port Dimensions: 7" x 6" x 23"L in, Tuning Frequency: 36.
  • Features of MJP1000.1: Extruded aluminum Heatsink, 12dB/octave butterworth crossovers, Variable crossovers, 3 EQ boost settings - 0,6,12dB (MJP800.4), Variable EQ bass boost (mono block amps), Strap-able (mono block amps), Bass knob included (mono block amps).
  • Features of RWK4CU: Rockville RWK4CU 4 Gauge 2 Channel Complete Car Amplifier Installation Kit 100% Pure Copper RCA Cables, 4 Gauge Power Amplifier Installation Kit, Designed specifically for car audio systems over 1000 watts RMS to 2000 Watts, Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal, The solid brass gold plated Mini ANL Fuse Holder offers ideal protection for high powered systems, Strand Count: 1862, BC-5W2 Compliant.
Check Stock

CERRXIAN 3.5mm TS Mono Male to 2 Pin Screw Terminal Female AUX Headphone Replacement Solderless Balum Converter Adapter (2-Pack)

  • One truth about working, you always need the cable or adapter when you don't have in your toolbox. That's why we choose these terminal-block audio connectors. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs..
  • Connecting single wires with open cable heads to your 3.5mm mono jack.With this adapter, you can convert 3.5mm audio interface signals into wires that connect audio signals from 3.5mm mono adapters. Corresponding to the channel terminal block, the wires fixed with screws are more useful, convenient and fast!.
  • Reliable connect, good performance with plastic construction and strain relief..
  • It is more convenient to use more quickly without welding..
Check Stock

Make Me Yours (Billionaire's Sub Book 2)

  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem.
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
  • Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches.
Check Stock

tisino 3.5mm to XLR Balanced Cable Adapter, Gold-Plated 1/8 inch Mini Jack Aux to XLR Male Mono Audio Cord for Cell Phone, Laptop, Speaker, Mixer - 1ft

  • ...r with shielding ensure high fidelity sound quality and provide maximum conductivity and signal clarity.great choice for music lover.
  • With Heavy Duty 24K Gold-plated XLR and 3.5 mm connectors, it could eliminate signal loss and static noise,provide durability and improve the signal transmission, and the copper shell blocks any interference which prevents the loss of sound quality.
  • Heavy Duty Flexible Rubber and Nylon Braid Jacket Protect Your Cable, the outer diameter of the cable is 6.0mm(0.24 inch),Top quality and made by environment-friendly material, Polyethylene insulation improves high frequency response,strong, flexible and durable.
Check Stock

Rockville RXM-F3 1600 Watt Marine/Boat 4 Channel Amplifier Amp+PA Microphone

  • Rockville Rxm-f3 1600 Watt peak/800W RMS Marine class D mono block amplifier..
  • Ceja Compliant Power Ratings: 65 watts RMS x 4 channel @4 ohms and 1% THD+N. 85 watts x 4 @ 2 ohms 003c 1% THD. 2 x 200 watts Bridged @ 4 ohms 003c 1% THD..
  • Rams power Ratings: 800 watts (4 x 200 watts RMS) @ 2 ohms. 800 watts (2 x 400 watts RMS) @ 4 ohm bridged. 500 watts (4 x 125 watts RMS) @ 4 ohms..
  • Peak power: 1600 watts (2 x 800 @ 2 ohms or 1 x 1600 @ 4 ohms). high-speed MOSFET power supply. Studio-grade bipolar output stage transistors..
  • Fully adjustable 12Db/ octave Crossover with differential circuitry. Ch3 & Ch4 low Pass 50Hz - 3Khz. Ch3 & Ch4 high Pass 15Hz - 1Khz. Ch1 & Ch2 high Pass 50Hz - 300Hz, 500Hz - 3Khz (X10)..
  • Crossover Band-Pass control. Fully adjustable 12Db Bass equalizer. 2 ohm stable stereo. 4 ohm mono bridgeable. 3 channel mixed-mono capable..
  • Full ice-controlled protection circuitry. Mute and delay soft start system. High level input with smart auto turn-on..
  • Full ice-controlled protection circuitry. 2 Ch./ 4 Ch. input mode switch. Rica preamp line output. Lena brand audiophile capacitors..
  • 8 Volt preamp circuitry. Status mode LED indicator. Minimum THD at rated power: 003c0.05%. frequency response: 10Hz - 40Khz..
  • Sensitivity: 100Db @ 1W/ 1M. Damping fact....
Check Stock

9 Inch Long 1/4 Inch Stereo TRS Female to 2 X 1/4 Inch Male Mono Y Splitter Cable

  • Tisino 1/8” Stereo to Dual 1/4“ Mono Cable, this cable is designed to connecting your smartphone, portable media player, laptop/PC or similar device with a 3.5mm mini jack output to a device with 2 x 6.35 mm jack inputs such as speakers, mixing console and so on..
  • This cable can be used to split a 3.5mm unbalanced stereo signal into two 1/4" TS(left/right) unbalanced mono signals, or to combine two 1/4" mono signals(left/right) into a single 3.5mm stereo signal. It splits closer to the 1/4 TS ends, the distance to the split point is about 19.8 inches(50 cm)..
  • 20 AWG 4N Oxygen Free Copper with shielding ensure high fidelity sound quality and provide maximum conductivity and signal clarity. a great choice for music lovers..
  • With Heavy Duty 24K gold-plated 6.35 mm and 3.5 mm connectors, it could eliminate signal loss and static noise, provide durability and improve the signal transmission, and the copper shell blocks any interference which prevents the loss of sound quality..
  • Heavy Duty Flexible Rubber and Nylon Braid Jacket Protect Your Cable, the outer diameter of the cable is 6.0mm(0.24 inch), Top quality and made by environment-friendly material, Polyethylene insulation improves high-frequency response, is strong, flexible, and durable..
Check Stock

Wampler Terraform Multi-Modulation Guitar Effects Pedal (WAMTERRAFORM)

  • Each of 11 effect blocks have been designed and realized in-house by the tone chasing freaks at Wampler: (Dimension, Chorus, Harmonic Tremolo, Tremolo, AutoSwell, Rotary, U-Vibe, Phaser, Flanger, Envelope Filter and AutoWah).
  • Run it in full glorious stereo or keep it in mono, even split that mono signal to route some effects to go before your drive pedals or amp gain, and have the rest follow behind or in your effects loop.
  • There are 8 presets to store your favorite sounds.
  • you can recall them via the fully mappable midi, via the button on the front and even from the stomps.
  • The expression pedal can control ANY of the 5 controls and you can even set the heel and toe point.
  • We’re all tone-freaks, and we’re always trying new things, but we hope this pedal finds it’s forever home on your pedalboard, so we built it to last that long.
Check Stock

ANYCUBIC Photon Mono 4K, Resin 3D Printer with 6.23' Monochrome Screen, Upgraded UV LCD 3D Printer and Fast & Precise Printing, 5.19' x 3.14' x 6.49' Printing Size

  • Large Build Volume: ANYCUBIC Photon Mono 4K has a large printing size of 132mm x 80mm x 165mm /5.19″ x 3.14″ x 6.49″, which leaves sufficient printing space and freedom for you to make any shapes of 3d models. The transparent top cover enables you to monitor the printing process while keeping 99.95% UV light blocking ratio, safe & easy for beginners..
  • 4K High Resolution: The 4K Monochrome LCD Screen has a HD resolution of 3840 x 2400, 35um XY pixels and 7% light transmittance, which means you can print all your models in a higher precision level. In addition, the contrast ratio is more than 350, making printing details more accurate and delicate, thus improving the printing quality and success rate..
  • Fast Printing Speed: ANYCUBIC Photon Mono 4K Resin 3D Printer’s max printing speed can reach 50mm/h, it only takes 2.5 hrs to print a 12cm / 4.7in model, 2.5X faster than regular resin printers. This 3d printer is an ideal choice for you to obtain higher precision models quickly, saving more time on waiting..
  • Universal Compatibility: Photon Mono 4K is compatible with most 3d printing resin on the market, you can get the best printing effect with ANYCUBIC 3D Printing UV-Curing Resins. It has 30%-100% UV light power regulation, you can adjust the set....
Check Stock

American Bass XFL DC 2000 Monoblock 4 Channel Class D 2000 Watt Max Power 180Hz Low Pass Car Audio Amplifier with Bass Boosting Functionality, Black

  • American Bass PH1600MD, 1600 watts Phantom Series Mono Block Class D Car Amplifier Require Fuse.
  • 60 amp x 1 (Not Included) Channel Operation: Mono Installation Required 4 Gauge Power And Ground Wire.
  • Variable subsonic: 10Hz 50Hz variable low Pass filter: 40Hz 220Hz switchable bass Boost: 0Db, 6Db, 12Db input level: 5V 0.2V frequency response: 10Hz 220Hz Dimensions: 5.51"W x 7.24"L x 2.12"H.
  • Peak power handling @ 1 ohm: 1600 watts x 1 channel RMS power handling @ 1 ohms: 800 watts x 1 channel.
Check Stock