Reviews Mold release Agent

Stoner E-236 Urethan Mold Release 1-12 oz can (Clear) (Clear)

  • Perfect For Many Projects - Mold release spray is an excellent choice for almost any project that involves molding material. This spray is easy to use, features high quality ingredients, & leaves you with a great product and intact molds..
  • High Silicone Content - The high level of silicone in our epoxy mold release ensures that your epoxy project doesn’t stick to your silicone molds. Release will be easy thanks to our rubber mold release spray..
  • Specially Formulated - Made just for use with silicone and rubber molds, our mold release spray is the perfect addition to your craft room or toolshed. The specialized formula ensures that your projects come out just as you want them to!.
  • Increase Lifespan Of Molds - Use this mold release agent to prevent rips and tears. Silicone molds tend to be fragile when used for molding projects. Using our mold release spray when creating projects can help to extend the life of your molds..
  • Easy To Apply - Our aerosol spray applicator makes using the releasing agent a breeze. Simply coat the mold in our casting release spray before casting the project. Once it is dry, the mold release allows the finished piece to be easily removed..
Check Stock

mitreapel Silicone Mold Release Spray (14.4 oz) Release Agent Aerosol Spray

  • Perfect For Many Projects - Mold release spray is an excellent choice for almost any project that involves molding material. This spray is easy to use, features high quality ingredients, & leaves you with a great product and intact molds..
  • High Silicone Content - The high level of silicone in our epoxy mold release ensures that your epoxy project doesn’t stick to your silicone molds. Release will be easy thanks to our rubber mold release spray..
  • Specially Formulated - Made just for use with silicone and rubber molds, our mold release spray is the perfect addition to your craft room or toolshed. The specialized formula ensures that your projects come out just as you want them to!.
  • Increase Lifespan Of Molds - Use this mold release agent to prevent rips and tears. Silicone molds tend to be fragile when used for molding projects. Using our mold release spray when creating projects can help to extend the life of your molds..
  • Easy To Apply - Our aerosol spray applicator makes using the releasing agent a breeze. Simply coat the mold in our casting release spray before casting the project. Once it is dry, the mold release allows the finished piece to be easily removed..
Check Stock

mitreapel Silicone Mold Release Spray 2 x 14.4 oz Release Agent Aerosol Spray 2 Pack

  • Perfect For Many Projects - Mold release spray is an excellent choice for almost any project that involves molding material. This spray is easy to....
  • High Silicone Content - The high level of silicone in our epoxy mold release ensures that your epoxy project doesn’t stick to your silicone molds.....
  • Specially Formulated - Made just for use with silicone and rubber molds, our mold release spray is the perfect addition to your craft room or....
  • Increase Lifespan Of Molds - Use this mold release agent to prevent rips and tears. Silicone molds tend to be fragile when used for molding projects.....
  • Easy To Apply - Our aerosol spray applicator makes using the releasing agent a breeze. Simply coat the mold in our casting release spray before....
Check Stock

Adhesive Guru Silicone Mold Release Aerosol Spray (13.5 fl oz) Lubricant Agent for Epoxy Resin Molds (1 Pack)

  • Perfect For Many Projects – Adhesive Guru mold release spray is an excellent choice for almost any project that involves molding material. Silicone mold release spray for epoxy resin molds used for silicone molds, candle molds, wax and urethanes. This spray is easy to use, features high quality ingredients & leaves you with a great product and intact molds..
  • High Silicone Content - The high level of silicone in our Adhesive Guru mold release for epoxy resin ensures that your epoxy project doesn’t stick to your silicone molds. Release will be easy thanks to our rubber mold release spray..
  • Special Formula - Made just for use with silicone and rubber molds, our mold release spray is the perfect addition to your craft room or toolshed. The special formula ensures that your projects come out exactly the way you want!.
  • Extend the Life Of Molds - Use this mold release agent to prevent rips. Silicone molds tend to be fragile when used for molding projects. Non-stick silicone lubricant prevents sticking, is colorless and odorless. Using our Adhesive Guru silicone spray mold release when creating projects can help prolong the life of your molds by preventing sticking..
  • Easy to Apply - Our aerosol spray applicator makes using the releasing agent a breeze. Simpl....
Check Stock

C Font Cuff Bracelet Silicone Bangle Mold Clear Round Bracelet Jewelry Casting Resin Mould

  • It can be used as Resin, Cabochon, Polymer Clay,Gum Paste, Pmc, Wax, Candle, Soap Mold.
  • Bracelet model finish product : inner diameter 63mm, height 32mm, groove width 6mm, opening width 31mm..
  • Cleaning: Wipe with alcohol or direct water to wash and clean..
  • Use: With silicone mold release agent is more durable, with silicone mold release agent is more durable.
  • Package included: 1 x C font open cuff silicone bracelet mold.
Check Stock

PARTALL Film #10 Polyvinyl Alcohol (PVA) Gallon

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) mold release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against mold hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over mold release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

Wallfire 2 Pieces Ashtray Epoxy Mould DIY Silicone Resin Kits Triangle Ashtray Mold with Lid for Succulent Planter Bowl Ashtray Candle Soap Pen Holder

  • High- quality material--- The resin mold kit is made of environmentally friendly liquid silicone, which has high transparency and better mirror effect. The liquid silicone mold has a long service life and is not easy to deform.
  • Easy to release--- The interior is smooth and shiny, which reduces the need for trimming and polishing. After your project is fully cured, it is easy to pull out the completed resin project, and then you can use a release agent.
  • Reusable and environmentally friendly silicone mold--- The smooth and silicone ashtray resin mold is made of high- quality silicone and can be cast indefinitely. It is an ideal material for making resin molds, because it can be used as a natural mold release agent, which is everyones Great choice.
  • Mold size --- Ashtray: 14. 95* 15cm/ 5. 88* 5. 90in.
  • Lid: 11. 7* 12cm/ 4. 60* 4. 72in, the size is appropriate.
  • About us--- Thank you for your choice. If you encounter any problems during the purchase process, please communicate with our customer service in time. We will solve your doubts at any time. I hope you can have a pleasant shopping experience, thank you..
Check Stock

Ingot Mold Silver Ingot Mould Gold Casting Ingot Crucible Mold for Melting Casting Refining Gold Silver Metal Aluminum Copper Brass

  • 8" Ingot Mold Mould is equipped with a wooden handle, which is safer to use..
  • 8" iron Ingot Mold Mould, more durable than graphite crucible..
  • There are three iron blocks, you can easily adjust the capacity of Ingot Mold Mould..
  • You can apply release agent or some oil before use, so that it can be released easily..
  • If our products have any problem, pease sontact us,we promise to help you within 24hrs..
Check Stock

4 Size Silicone Bangle Mold Clear Round Bracelet Jewelry Casting Resin Mould Normal

  • It can be used as Resin, Cabochon, Polymer Clay,Gum Paste, Pmc, Wax, Candle, Soap Mold.
  • Finish product inner diameter: 4 sizes: 2.12", 2.28",2.36" 2.44".
  • Cleaning: Wipe with alcohol or direct water to wash and clean..
  • Use: With silicone mold release agent is more durable..
  • Package included: 4 size silicone bracelet mold.
Check Stock

PVA - PARTALL Film #10 Polyvinyl Alcohol (PVA) Pint

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

Polytek Pol-Ease 2500 Release Agent (12oz. Can)

  • Can be washed off models and castings if they need to be painted.
  • For Mold Making: Apply to non-porous or sealed models when making silicone rubber molds (not recommended for use with liquid polyurethane rubbers)..
  • Apply to silicone rubber molds when casting liquid silicone rubber.
  • To extend mold life, apply to silicone molds when casting materials such as polyurethane plastics, rubbers or epoxies (release agent is not needed for this process, but can extend mold life).
  • Apply to polyurethane molds before casting polyurethane liquid plastics.
Check Stock

Polytek Pol-Ease 2500 Release Agent (Case of 12 cans)

  • Can be washed off models and castings if they need to be painted.
  • For Mold Making: Apply to non-porous or sealed models when making silicone rubber molds (not recommended for use with liquid polyurethane rubbers)..
  • Apply to silicone rubber molds when casting liquid silicone rubber.
  • To extend mold life, apply to silicone molds when casting materials such as polyurethane plastics, rubbers or epoxies (release agent is not needed for this process, but can extend mold life).
  • Apply to polyurethane molds before casting polyurethane liquid plastics.
Check Stock

Pack of 2 Cat Paws Shape Epoxy Mold Cute Catie Footprint Resin Casting Silicone Mold, 3.8 x 3.5cm

  • Material: Silicone. Soft, flexible, durable and reusable, easy to get the mold out..
  • Pack of 2 cat paws silicone mold. The finished products are very shiny and clear..
  • Fun DIY craft mold, you can add some resin pigment or filters to make the cat paw more attractive..
  • After your project is fully cured, it will be easy to pop out of the resin mold. You can use soapy water as a mold release agent. Keep stored in a dry dust free area. Stay away from strong acids..
Check Stock