Reviews Mold And Pcb

PCB Drill Bits Set, Micro Drill Bits Set, 10 Pcs Print Circuit Board Drill Bits, 0.1mm to 1.4mm Drill Bits Carbide Drill Bits Tool Set(0.1mm)

  • Cutting Edge Diameter: 0.1mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.7mm, 1.2mm, 1.3mm, 1.4mm(Optional).
  • Drills bits are perfect for delicate drilling through hard materials for model engineering, jewelry repairs, craft work, suitable for PCB, SMT, CNC, mold, sculpture, plastic, copper, stainless steel..
  • Drill bit has a large scraps discharge space,reduce cutting force and broken drill,little resistance and smoothly during the scraps discharge,improve the quality of hole wall..
  • PCB drill bits are easy to change out and do a great job cutting through the PCB for solder holes.Come in a great storage container that is easy to grab the drill bit you need when you need it..
  • These bits are made of high quality materials,work fantastic on PCB boards. Sharp and twisted flute will make the drilling be more easy..
Check Stock

ODOMY 57pcs Pin Vise Hand Drill Bits Mini Hand Drill Rotary Tool,46pcs 0.3-3.0mm Micro Twist Drill Bits and 10pcs PCB Mini Drill Bits for Resin Plastic Wood Jewelry Making

  • Practical and Portable: The hand-held drill is easy to carry or store in a toolbox or pocket, making your daily work more convenient, suitable for electronic assembly, tools, model making, winding, home decoration, etc..
  • Pin Vise Hand Drill: Aluminum alloy, sturdy and durable, its tail can be rotated, sturdy and easy to operate, Ideal for making pilot holes when fixing small item that you can’t hold eg plastic sleepers on the track..
  • You Will Receive:A total of 57 pieces of electric hand drill set for you to do hand-carving DIY work, Twist drill bit: 0.3-3mm, PCB micro drill: 0.1mm-1mm, Vise: 3.5*0.6inch..
  • PCB micro drill: PCB micro drill is made of tungsten carbide, suitable for processing PCB, ordinary FR-4, CEM-3 board, SMT, CNC, mold, plastic, circuit board, carbon fiber, composite board, etc..
  • Micro twist drill: The micro drill is light in weight and compact in size. It does not take up extra space. It is used to process wood, plastic, rubber, PVC, walnut, model, bone, angle steel, amber, olive, fiberglass, and other materials..
Check Stock

FR4 Epoxy-Sheet Resin Glass-Fiber Insulation-Plate - 335X300X1MM Green

  • 1. FR-4 epoxy board has the characteristics of insulation, flame retardant, high temperature resistance, and strong physical properties.
  • 2. It is an indispensable main material or auxiliary material for high -end motor electrical appliances, wind power, hydropower, rail transit, aviation navigation, mold molds, electronics, intelligent physiotherapy and other industries..
  • 3. You can injection mold molding machine, motor, PCB, ICT treatment table grinding pad, high -performance electronic insulation, FPC reinforcement board, carbon film, insulation pad ..
  • 5.Size: 1/25 "Thick x 11.8" Wide x 13.2 "Long.
Check Stock

Milling Cutter, Fine Workmanship 3.175mm Milling Cutter, SMT for PCB

  • The use of ultra-fine grained cemented carbide materials, with good milling and cutting performance.
  • The cutting edges, milling, holes and edges are of sharpness, with high efficiency.
  • Fine workmanship, clean and tidy surface, no burrs.
  • Including 10pcs milling cutters, convenient to replace and use.
  • Suitable For: PCB, SMT, CNC, mold, plastic fiber, carbon fiber and printed circuit board, etc..
Check Stock

HQMaster Combination Kit Set Router Bits Cutter Cutting Milling Tool (4 Type, Each 10Pcs) Including Flat/Ball Bits, 10 V-Shape Engraving Bits

  • Cost-effective bits: package include 4 type bits each 10pcs assorted in 4 storage cases meet most standard milling applications).
  • Perfect cutting: The design of flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal. made of quality ultral fine tungsten carbide material.
  • Excellent cutting results and enhanced productivity.
  • Wide Compatibility: compatible with most desktop or industrial CNC machines. Used for carving, engraving, milling, dadoing, boring, routing, slotting in materials like density board, wood, acrylic, plastic, PCB, PVC, PP, MDF, nylon, resin, plywood, hardwood etc..
  • Used for PCB, SMT, the CNC, mold, plastic, thin copper/aluminum/stainless steel and other precision metal parts processing.
  • High efficiency: These bits own sharp edge which is able for fast engraving that makes high efficiency.
  • Fast chip-removal speed leaves an unobstructed path for the end mill.
  • Well made & Excenllent Performace: Mirror polishing and space of Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal.
Check Stock

3.175mm Milling Cutter, Fine Workmanship Cemented Carbide 10Pcs Convenient Milling Cutter for CNC for PCB for SMT

  • The use of ultra-fine grained cemented carbide materials, with good milling and cutting performance.
  • The cutting edges, milling, holes and edges are of sharpness, with high efficiency.
  • Fine workmanship, clean and tidy surface, no burrs.
  • Including 10pcs milling cutters, convenient to replace and use.
  • Suitable For: PCB, SMT, CNC, mold, plastic fiber, carbon fiber and printed circuit board, etc..
Check Stock

3.175mm Milling Cutter, Convenient Fine Workmanship Coating Milling Cutter Sharpness Cemented Carbide for CNC for SMT for PCB

  • The use of ultra-fine grained cemented carbide materials, with good milling and cutting performance.
  • The cutting edges, milling, holes and edges are of sharpness, with high efficiency.
  • Fine workmanship, clean and tidy surface, no burrs.
  • Including 10pcs milling cutters, convenient to replace and use.
  • Suitable For: PCB, SMT, CNC, mold, plastic fiber, carbon fiber and printed circuit board, etc..
Check Stock

Milling Cutter, 3.175mm Milling Cutter, High Efficiency 10pcs Ultra-Fine Grained Cemented Carbide Materials for PCB SMT

  • Including 10pcs milling cutters, convenient to replace and use.
  • The cutting edges, milling, holes and edges are of sharpness, with high efficiency.
  • The use of ultra-fine grained cemented carbide materials, with good milling and cutting performance.
  • Suitable For: PCB, SMT, CNC, mold, plastic fiber, carbon fiber and printed circuit board, etc..
  • Fine workmanship, clean and tidy surface, no burrs.
Check Stock

Qingsi 5Pcs/Set 3D Sublimation Silicone Mug Wrap with 108Ft Heat Resistant Tape 11OZ 12OZ 15OZ Mug Mold Cup Clamp Fixture Heat Transfer Tapes for Printing Mugs Sublimation Transfer Machine

  • ❥❥❥3-SIZED MUG MOLD: Comes with 3pcs heat press silicone mug clamps in 3 sizes with 11 oz( 9.4 x 4.3 inches/ 24 x 11 cm), 12 oz (10.4 x 4.3 inches/ 26.5 x 11 cm) and 15 oz (9.5 x 4.9 inches/ 24.2 x 12.5 cm) mugs respectively.The wide range of sizes can fully meet your various needs of printing..
  • ❥❥❥WITH HEAT TRANSFER TAPE: Width: about 10mm/0.39in.
  • Length: about 33m /108ft.This heat transfer tape keep your design in place when you making shirts and hats,help to do heat transfer vinyl on a heat press.The adhesive tape can resist high temperature during thermal transfer to prevent your body from being burnt while operating..
  • ❥❥❥EASY TO USE: Fist, wrap your cup with suitable 3D sublimation silicone clamps, then buckle the metal button to fix the cup, after finishing heating and printing, open the button and take off the silicone clamps.The installation is very simple and can effectively fix the mug during printing..
  • ❥❥❥APPLICATION: These cup clamps can fix the position of the cup to avoid false operation caused by dislocation,suitable for 3D printing. The heat press tape also work well in protecting electronic products, transformer, electric motor, solder, as well as painting, packing fixing, printing PCB board..
Check Stock

SainSmart Genmitsu 10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8' Shank

  • ➤Cutting Edge Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/3.0mm), 10Pcs..
  • : ➤Advantage: With sufficient flexural strength and wear resistance, which ensure high work efficiency. Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches..
  • ➤Material: Using ultra-fine grained carbide material, with good milling and cutting performance..
  • ➤Application: PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, and other precision parts processing..
  • ➤Genmitsu CNC Bits Selection Guide: To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
Check Stock

Yellow Sanwa LB35 Balltop for JLF Joysticks

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

Soiiw 110V 850W LED Microcomputer Electric Hot Plate Preheat Soldering Preheating Station Welder Hot Plate Rework Heater Lab 200x200mm Plate

  • Three-dimensional cooling hole design: multi-angle cooling design for better cooling effect and strong practicability..
  • High quality aluminum plate as the heater: multi-tube technology efficient heating tube ensures good heat transfer effect.
  • This item can be used to divide, repair cell phone screen, LED display, Component work, SMD reengineering work, PCB removing, soldering work.
  • Welding and maintenance of aluminum substrate in LED industry.
  • Preheating of mold core in abrasive factory.
  • Constant temperature heating for sealing,....
  • The constant temperature heating platform adopts high-performance CPU to control temperature, it has accurate temperature control and strong....
Check Stock

Voyager General Duty Single-Line Wireless Bluetooth Handheld Barcode Scanner (1202g)

  • Eliminates the need for specialty scanners as it easily scans most linear barcodes (including poor quality and damaged codes) and also scans high-density bar codes with resolution down to 3.5 mil.
  • Maximizes throughput via object detection and automatic in-stand detection/ configuration.
  • automatic multi-interface detection/configuration supports USB, keyboard wedge, and RS232 to minimize costs.
  • Integrated Bluetooth Class 2 radio allows scanning up to 10 m (33 ft) from the base, and 30 m (100 ft) with a clear line-of-sight.
  • auditory paging system makes misplaced scanners easy to find.
  • Tough construction decreases downtime and service costs via impact-resistant single shock-mounted PCB, recessed button with integrated rubber co-mold, scratch-resistant glass window and IP42-rating.
  • CodeGate Technology makes this barcode reader ideal for use in menu scanning applications.
  • lithium ion battery provides 12 hours or more of use.
Check Stock