Reviews Module Switch

Philips Hue 2-Pack Wall Switch Module (For Philips Hue lights only), White

  • KEEP YOUR LIGHTS POWERED ON AND REACHABLE: With the Philips Hue wall switch module, your lights are always on and connected to your smart lighting system..
  • CONTROL LIGHTS, ROOMS, OR A ZONE: Use your existing light switch to control your Philips Hue smart lights in a Room or Zone..
  • CYCLE THROUGH UP TO THREE LIGHT SCENES: Use your existing light switch to set up to three different light scenes..
  • BATTERY INCLUDED: The Philips Hue wall switch module includes a battery with a minimum lifetime of five years..
  • HUE BRIDGE REQUIRED: The Philips Hue wall switch module requires a Hue Bridge..
Check Stock

uxcell BWL100 100 mm Pull Rod Linear Position Displacement Sensor for Printer

  • Shipping list: AC 220V vibration sensor delay module, with ultra-high sensitivity vibration sensor..
  • AC 220V power supply ultra-high sensitivity vibration delay module plus relay module plus delay three-in-one module, vibration switch module Alarm trigger, with 1 vibration sensor. Relay does not have B1 normally closed end..
  • corridor delay switch, delay energy-saving products.
  • Supply voltage: AC 220V power supply, Current: greater than 100mA.
Check Stock

1024 P/R 5VDC 10mm Diameter Hollow Shaft Incremental Rotary Encoder

  • This is the "momentary" variety of the touch sensor - touch and it turns on, release and it turns off..
  • Positive and negative can be used as a touch surface,can replace the traditional touch button..
  • Four M2 screws positioning holes for easy installation.Module can be installed in such as surface plastic, glass of non-metallic materials..
  • In addition to the thin paper ( non-metallic ) covering the surface of the module , as long as the correct location of the touch , you can make hidden in the walls, desktops and other parts of buttons..
  • The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the module output low, low power consumption.
  • When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode..
Check Stock

Legrand, Home Office & Theater, Network Switch, Platinum Grey, 12 Port, AC1014

  • NETWORK INTERFACE MODULE: 12 port Cat 5e network interface module has high density mini patch panel..
  • SWITCH BETWEEN DATA AND VOICE APPLICATIONS: Easily switch an outlet from Voice to Data or from Data to Voice with this Cat 5e Network Interface Module..
  • CAT5e SPECIFICATION: It meets Cat5e specifications and RJ45 ports are labeled 1 thru 12..
  • AVAILABLE SIZE: The network module has two different size – 6 port, 12 port..
  • AVAILABLE STYLE: It has two different specification – Cat 5e, Cat 6.
Check Stock

QuickStick Combo HUSBZB-1 by Nortek Cert ID ZC10-15090013

  • Reversing relay module. Powers any reversing motor equipment, can be used for any application that requires the ability to reverse motion.
  • Support Momentary-action(Self-resetting) switch and Alternate-action (Self-holding) switch. For Self-resetting switch, when the switch is pressed the....
  • Compact plastic case and wires connect for easy mount..
  • Forward and Reverse status indicating LED, forward status lighting red, reverse lighting green. When the control switch is not turned on, the module....
  • Rated current 10 Amp, Operating Voltage: 10 ~ 15V DC..
Check Stock

HAC-001 Game Cartridge Card Slot Reader Tray Connector Flex Cable Module Replacement Compatible with Nintendo Switch

  • Game Cartridge Card Slot Reader Tray Connector Flex Cable Module Replacement Compatible with Nintendo Switch.
  • Tips: This is Game Cartridge Card Slot Reader Tray Connector Flex Cable Module replacement to replace your old damage Game Cartridge Card Slot Reader Tray Connector Flex Cable Module, don't include instructions, please install it by a professional technician..
  • Broken your Game Cartridge Card Slot Reader Tray Connector Flex Cable Module, don't need to change new machine, just buy this item and replce your damage Game Cartridge Card Slot Reader Tray Connector Flex Cable Module, let your Device work again again..
  • Compatible with: Nintendo Switch (Please check your machine model before your purchase).
  • Product is fragile, easy to be damage during shipping. So if there are any questions, please contact the seller for help first, we will try our best to help you..
Check Stock

Forward and Reverse Relay Module for Motor/Linear Actuator, Reversing Relay Module (DC 12V)

  • Reversing relay module. Powers any reversing motor equipment, can be used for any application that requires the ability to reverse motion.
  • Support Momentary-action(Self-resetting) switch and Alternate-action (Self-holding) switch. For Self-resetting switch, when the switch is pressed the motor operates, and when the switch is released the motor stops..
  • Compact plastic case and wires connect for easy mount..
  • Forward and Reverse status indicating LED, forward status lighting red, reverse lighting green. When the control switch is not turned on, the module does not consume electric energy..
  • Rated current 10 Amp, Operating Voltage: 10 ~ 15V DC..
Check Stock

Painless Performance 80132 Single Pole, Double Throw Relay, 40 Amp

  • ★ The 8-channel relay module is equipped with transistors, diodes and optocouplers to switch higher loads safely, reliably and with little power. The module is also equipped with generously dimensioned relays in order to be able to reliably carry out many switching processes..
  • ★ 5V 8-channel relay module, each relay requires 70mA for switching (switching capacity AC: max. 250V / 10A.
  • ★ 5V 8-channel relay module can be controlled directly with a microcontroller Raspberry Pi, Arduin, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic, etc..
  • ★ The relay acts as a switch that responds to a signal from the Arduin. Because of this, it is widely used in IoT projects to control lights and other electronic devices..
  • ★ Application: MCU control, PLC control, industrial area, smart home.If you need this relay, you can buy it directly. If there is a problem during use, you can contact us at any time to refund or replace it..
Check Stock

CARLO GAVAZZI EC3025TBAPL Capacitive Proximity Sensor, Triple-Shield Protection, M30, 25 mm Range, 20-250 VAC, NO or NC, 500 mA SCR Output, Diagnostic LED, 2 m PVC Cable, 6.3 oz. Size, 35 mm Height x 107 mm Width x 173 mm Diameter

  • HIGH RELIABILITY: This module is based on a touch detection IC ( TTP223 ) of capacitive type touch jog switch module. Stable touching detection of human body for replacing traditional direct switch key..
  • HIGH AVAILABILITY: A very useful addition for projects or applications where a conventional mechanical button or switch is not an ideal choice..
  • EASY TO INSTALL: The module can be installed in plastic, glass surface non-metallic materials. As long as the touch of the correct position, you can make hidden in the wall, desk and other places..
  • SMALL SIZE&LIGHT WEIGHT: Size: 15mm x 11mm .59"x 0.43" (LxW).
  • Package Included: 20x Capacitive Touch Switch Button Self-Lock Module..
Check Stock

FINDER 90.26 Relay Socket, 250V, 10A, DIN Rail

  • Output can be directly connected to microcontroller, through single chip microcomputer to detect the high and low level, thus to detect whether there is a vibration environment, call the police..
  • This module is compared with the normally open type vibration sensor module, vibration trigger for longer periods of time, can drive the relay module..
  • Product vibration, the vibration switch instantaneous disconnection, output the output high level, the green light is not bright.
  • Product no vibration, vibration switch is closed on state, the output terminal output low level, the green light is lit.
  • Used to trigger the effect of various vibration, theft alarm, intelligent car, earthquake alarm, motorcycle alarm, etc.
Check Stock

COLOROCK Mini Smart Relay WiFi Switch, 16A 1 Gang DIY Smart Light Switch Module Smart Life/Tuya App, Compatible with Alexa and Google Home Smart Speakers,with Appointment Timing Function.(2Pack).

  • This smart wifi module with mini design suits for wall switch box,and easily hide it into your hidden wall switch box of your traditional switch without any influences on your original decoration style to make it smart.More importantly,your traditional switch and this smart module can work independently under non-interfering mode. (Note:This module is only suitable for rocker switch,see figure 2 for details.).
  • Can be used as a 1-way or 2-way circuit (2 switches control 1 light).
  • simply connect to 1 of the 2 switches and convert the connected device into a smart one (for 2-way circuit).
  • Take full control of connected appliances with timers, schedules and countdown (1/5/30 mins, 1 hour, etc.) with the app.
  • share control with family and friends for added convenience.
  • Control with your smart phone via Smart Life/Tuya app without a separate hub..
  • The MINI WiFi Switch is compatible with Amazon Alexa ( Amazon Echo/Echo Dot/Amazon Tap) and Google Home Assistant. It allows you to use your voice to control home devices and enjoy hands-free experience..
Check Stock

Garbage Disposal Air Switch Kit Sink Top Waste Disposal Long Stainless Steel Brushed Nickel On/Off Air Button Food and Waste Disposals Part by Etoolcity

  • Upgrade Version: We redefined the air switch, made of real stainless steel, never worry fade away and fall off, more elasticity and flexiable.
  • Two Power Module Installation Methods: You can use screws to fix the power module part, or use strong nano-markless hook sticker to attach directly to the wall. Both ways are very strong.
  • Safety & Security: The power module allows any garbage disposal power cord to fit safely and securely without any issues. The power line is attested by UL for security and long-term use.
  • Easy To Installe Air Button: Just drill a not less then 1-1/4 diameter hole in the sink, counter-top or front of the sink cabinet, place the rubber gasket between the push button and the top of the sink counter. Tighten the plastic nut under the sink counter to ensure a watertight seal.
  • Air switch kit includes: Single outlet power module, 5 ft long air tube, 2.5 ft power cable, long(2.7'') stainless steel brushed nickel air switch button, set screws and strong nano-markless hook sticker.
Check Stock

ASHATA Games Controller Adapter Keyboard Mouse Adapter for PUBG Game Console Accessories with PC Gaming Experience for Android/iOS Gaming Keyboard and

  • Reversing relay module. Powers any reversing motor equipment, can be used for any application that requires the ability to reverse motion.
  • Support Momentary-action(Self-resetting) switch and Alternate-action (Self-holding) switch. For Self-resetting switch, when the switch is pressed the....
  • Compact plastic case and wires connect for easy mount..
  • Forward and Reverse status indicating LED, forward status lighting red, reverse lighting green. When the control switch is not turned on, the module....
  • Rated current 10 Amp, Operating Voltage: 10 ~ 15V DC..
Check Stock