Reviews Module Power Connector

Tekonsha 90250 Prodigy RF Electronic Brake Control

  • The perfect multiple vehicle-shared trailer solution, suitable for any trailer with up to 3 axles.
  • Hand Held control unit in the Tow Vehicle, Trailer Power Module on the Trailer.
  • Wireless communication between the remote hand unit and trailer mounted power module.
  • Proportional braking, forward and reverse, no level adjustment necessary.Trailer braking power supplied via 7-Way Connector from the vehicle.
  • Compatible with tow vehicles that have multiplex wiring systems.
Check Stock

Audio-Technica Instrument Condenser Microphone (ATM350U)

  • ...Open Circuit Sensitivity: -49 dB (3. 5 mV) re 1V at 1 Pa Impedance: 200 Ohms Maximum Input Sound Level: 159 dB SPL, 1 kHz at 1% T. H. D. Dynamic Range (Typical): 130 dB, 1 kHz at Max SPL Signal-To-Noise Ratio: 65 dB, 1 kHz at 1 Pa Phantom Power Requirements: 11- 52V DC, 3. 5 mA typical Switch: Flat, roll-off Output Connector: Power Module: Integral 3-pin XLRM-type Cable: 4. 0m (13. 12') long (permanently attached to microphone), 3. 2mm (0. 13") diameter, 2-conductor shielded cable with HIROSE HR10-type connector Audio-Technical Case Style: M36 Dimensions: Microphone (L x Maximum Dia. ): 37. 8 x 12. 2mm (1. 49 x 0. 48"), Power Module (L x Dia. ): 92 x 18. 9mm (3. 62 x 0. 74") Weight: Microphone: 14. 5g (0. 51oz), Power Module: 90g (3. 17oz).
Check Stock

SparkFun MicroMod LoRa Function Board - 1W 915M30S LoRa Module Frequency Range: 900 - 931MHz Transmit Power 28.5 - 30dBm (max) Modulation LoRa, FSK, GFSK, MSK, GMSK, OOK Antenna Impedance: 50Ω

  • The 1W LoRa MicroMod Function Board adds LoRa capabilities to your MicroMod project. It is intended to be used in conjunction with a MicroMod processor board and a MicroMod main board, which provides the electrical interface between a processor board and the function board(s)..
  • Utilizing the 915M30S LoRa module from EBYTE, which is a 1W (30dBm) transceiver based around the SX1276 from Semtech. There is a robust edge mount RP-SMA connector for large LoRa (915MHz) antennas.
  • with modification, a U.FL connector is also available. We've successfully tested a 12 miles line-of-sight transmission with this module (user results may vary)..
  • Board Features: M.2 MicroMod Edge Interface, Keyed Screw Slots, RP-SMA Antenna Connector, Configurable U.FL Antenna Connector. MicroMod Peripherals Used: 5V Power.
  • 1W 915M30S LoRa Module Features: Based on SX1276 chipset from Semtech.
  • modulation: LoRa, FSK, GFSK, MSK, GMSK, OOK.
  • Data Rate: FSK: 1.2 - 300kbps, LoRa: 0.018 - 37.5kbps.
  • Note: A MicroMod Processor, Main Board, and antenna are not included with this MicroMod LoRa Function Board. These parts will need to be purchased separately.
Check Stock

Autowbrake - Plug and Tow Trailer Mounted Electric Brake Controller

  • The perfect multiple vehicle-shared trailer solution, suitable for any trailer with up to 3 axles.
  • Hand Held control unit in the Tow Vehicle, Trailer Power Module on the Trailer.
  • Wireless communication between the remote hand unit and trailer mounted power module.
  • Proportional braking, forward and reverse, no level adjustment necessary.Trailer braking power supplied via 7-Way Connector from the vehicle.
  • Compatible with tow vehicles that have multiplex wiring systems.
Check Stock

2X USB Charger Charging Port Dock Connector Module Replacement Compatible with Ellipsis 8 inch QTAQZ3 Verizon Tablet

  • USB Charger Charging Port Dock Connector Module Replacement Compatible with Ellipsis 8 inch QTAQZ3 Verizon Tablet.
  • Tips: This is USB Charger Charging Port Dock Connector Module replacement to replace your old damage USB Charger Charging Port Dock Connector Module, don't include instructions, please install it by a professional technician..
  • Broken your USB Charger Charging Port Dock Connector Module, don't need to change new machine, just buy this item and replce your damage USB Charger Charging Port Dock Connector Module, let your Device work again again..
  • Compatible with: Ellipsis 8 inch QTAQZ3 Verizon Tablet (Please check your machine model before your purchase).
  • Product is fragile, easy to be damage during shipping. So if there are any questions, please contact the seller for help first, we will try our best to help you..
Check Stock

2X LCD Connection Connector Ribbon Flex Cable Module Replacement Compatible with Samsung Galaxy Tab A7 10.4 2020 T500

  • LCD Connection Connector Ribbon Flex Cable Module Replacement Compatible with Samsung Galaxy Tab A7 10.4 2020 T500.
  • Tips: This is LCD Connection Connector Ribbon Flex Cable Module replacement to replace your old damage LCD Connection Connector Ribbon Flex Cable Module, don't include instructions, please install it by a professional technician..
  • Broken your LCD Connection Connector Ribbon Flex Cable Module, don't need to change new machine, just buy this item and replce your damage LCD Connection Connector Ribbon Flex Cable Module, let your Device work again again..
  • Compatible with: Samsung Galaxy Tab A7 10.4 2020 T500 (Please check your machine model before your purchase).
  • Product is fragile, easy to be damage during shipping. So if there are any questions, please contact us first, we will try our best to help you..
Check Stock

HAC-001 Game Cartridge Card Slot Reader Tray Connector Flex Cable Module Replacement Compatible with Nintendo Switch

  • Game Cartridge Card Slot Reader Tray Connector Flex Cable Module Replacement Compatible with Nintendo Switch.
  • Tips: This is Game Cartridge Card Slot Reader Tray Connector Flex Cable Module replacement to replace your old damage Game Cartridge Card Slot Reader Tray Connector Flex Cable Module, don't include instructions, please install it by a professional technician..
  • Broken your Game Cartridge Card Slot Reader Tray Connector Flex Cable Module, don't need to change new machine, just buy this item and replce your damage Game Cartridge Card Slot Reader Tray Connector Flex Cable Module, let your Device work again again..
  • Compatible with: Nintendo Switch (Please check your machine model before your purchase).
  • Product is fragile, easy to be damage during shipping. So if there are any questions, please contact the seller for help first, we will try our best to help you..
Check Stock

Carry Case 16 Game Card and Stylus Holders Large Pocket for Nintendo 3DS XL & 3DS & 2DS XL

  • L R Left Right Shoulder Trigger Button Switch Connector Module Flex Cable Replacement Compatible with Nintendo 3DS XL (not fit 3DS).
  • Tips: This is L R Left Right Shoulder Trigger Button Switch Connector Module Flex Cable replacement to replace your old damage L R Left Right Shoulder Trigger Button Switch Connector Module Flex Cable, don't include instructions, please install it by a professional technician..
  • Broken your L R Left Right Shoulder Trigger Button Switch Connector Module Flex Cable, don't need to change new machine, just buy this item and replce your damage L R Left Right Shoulder Trigger Button Switch Connector Module Flex Cable, let your Device work again again..
  • Compatible with: Nintendo 3DS XL (not fit 3DS) (Please check your machine model before your purchase).
  • Shipped by Amazon. Any questions, please contact us first, we will try our best to help you..
Check Stock

WayinTop 2pcs ACS712 Hall Effect Current Sensor Module 30A Range ACS712 Module + 2pcs Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino

  • 【Perfect Combination】Using this product can measure both voltage and current, very suitable for DIY electronic design projects..
  • 【Current Sensor Module】Chip: ACS712ELC-30A.
  • Pin 5V power supply, on-board power indicator.
  • The module can measure positive and negative current of 30 amperes, corresponding to analog output of 66mV/A..
  • 【Voltage Sensor Module】Voltage input range: DC0-25V.
  • DC input connector: Terminal cathode connected to VCC, GND negative pole.
  • Output interface: "+" then 5/3.3V, "-" then GND, "s" then the for Arduino AD pins..
  • 【Package Included】2 x ACS712 Hall Effect Current Sensor Module + 2 x Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor.
Check Stock

Resistance Power Divider DC-5GHz SMA-K Power Splitter Module Signal Power Splitter Industrial Eletrical Supplies

  • Support DC-5G power frequency, RF power splitter is easy to use in the practical life, which makes itself getting great popularity..
  • When it comes to the power distribution channel, resistance power divider makes one channel input signal into two channel..
  • Connector form is for SMA-K, which refers to standard female connector and external screw inner hole..
  • The connecting part has good contact performance, which ensures stable working..
  • Professionally designed, power divider module can be the perfect replacement for the old or damaged one..
Check Stock

DGZZI 50pcs Blue 5mm Pitch PCB Mount Screw Terminal Block Connector for Arduino (20pcs 2 Pin + 15pcs 3 Pin + 15pcs 4 Pin)

  • Application: crystal oscillator, IC socket, DIY PCB universal board, Dupont wire, digital tube, buzzer, Arduino UNO board, PIC programming unit, AVR ATMEL programming unit, connector suite, USB TO TLL module, power module, LCD module, RS232 TO TLL module..
  • Package includes: 20 x 2 Pin Screw Terminal Block + 15 x 3 Pin Screw Terminal Block + 15 x 4 Pin Screw Terminal Block.
Check Stock

Great Scott Gadgets Ubertooth One Antenna & Aluminum Enclosure Bundle by Nooelec

  • Everything you need to get started with 2.4GHz development, including Ubertooth One module installed into a custom shielded aluminum enclosure and a....
  • All bundle components covered under warranty for 1 year, directly through Nooelec.
  • Ubertooth One is a configurable 2.4GHz transceiver with great application software and support.
  • and with suitable transmit power and receive....
  • Standard Cortex Debug Connector (10-pin 50-mil JTAG) In-System Programming (ISP) Serial Connector.
  • Expansion connector intended for inter-Ubertooth communication or other future uses.
Check Stock

Mardatt 108 Pcs 15 30 45 Amp Quick Disconnect Power Terminals Connectors and PVC Flame Retardant Connector Sleeve Cover Kit Red Black Battery Modular Connector Set

  • 【What you Get】 The quick modular connectors assorted set contains 16 pcs 15A red& black power connector, 16 pcs 30A red & black power connector, 16 pcs 45A red & black power connector, 48 pcs silver plated copper contacts(16pcs-15Amp, 16pcs-30Amp, 16pcs-45Amp)and 12 pcs cover flame retardant sleeve, totally 108 pcs..
  • 【Reliable Disconnect Terminal】Made of silver plated metal, it provides the lowest electrical resistance, high current minimum and more power. The housings are modular and genderless that make sure assembly easily. Secures individual connectors in "Keyed" assemblies that prevent connection errors with similar configurations. Decent fit & finish.
  • interoperable with An***son brand connectors..
  • 【Black and Red Housing】 The terminal connector features with color-coded plastic cover, provides a visual identification of the compatible connector which will be matched with each other well, making sure the alignment of positive and negative cables..
  • 【Practical Sleeve Cover】Made of high quality PVC material with excellent flame retardant and Insulation protection.
  • Safe to use. Dimension-8*15*40mm. The size is perfect for the terminal connectors, providing the convenience of installation..
Check Stock