Reviews Modified Acrylic Solid Surface

IVY Classic 36350 Laser Carbide 7-1/4-Inch 60 Tooth Solid Surface and Plastic Cutting Circular Saw Blade with 5/8-Inch Diamond Knockout Arbor, 1/Card

  • Designed for cutting plastics, acrylic sheets, Plexiglas and solid surface materials such as: Corian and Fountain Head..
  • Triple chip ground large C4 modified tungsten carbide teeth, Laser Carbide (Registered Trademark).
  • Industrial duty blade with fully hardened body - Rockwell Hardness 40 - 43 HRC.
  • Expansion slots reduce heat build-up and eliminate warping.
  • Arbor: 5/8-inch diamond knockout, Kerf: 0.110-inch, Hook: 0-degree.
Check Stock

Sika Anchorfix-2, super strength anchoring adhesive, Two component anchor system for threaded bars in uncracked concrete, 10.1 fl. Oz

  • Sika AnchorFix-2 is a two-Component, Solvent- and Styrene-Free, Modified-Acrylic Anchoring Adhesive..
  • SUPPORTS: It can be used on concrete solid, masonry, steel, hard natural stone, solid rock..
  • USES: Fast curing anchoring adhesive for rebars / reinforcing steel, threaded rods, bolts and special fastening systems..
  • PERFORMANCE: High load capacity. Drinkable water certified. Anchoring without expansion forces..
  • APPLICATION: Applied with standard guns and by experienced professionals.
Check Stock

3M 5952/BLK02515 Scotch 5952 VHB Tape: 1/4" x 36 yd, Black

  • 3M 5952 Heavy Duty Mounting VHB Tape is black, double-coated VHB adhesive tape with an acrylic foam core. A modified acrylic adhesive is on both sides of very conformable foam which provides adhesion to the broadest range of substrates/surfaces, including most powder coated paints. It comes on a red film release liner..
  • 3M 5952 double-sided tape (heavy-duty 45-mil) gives you the simplicity and ease of a tape fastener and is perfect for many indoor and outdoor bonding applications. 3M double-sided tape (automotive, heavy-duty applications) can, in many cases, replace liquid adhesives, rivets, spot welds, and other permanent fasteners..
  • Note: It is recommended to use 4 square inches of 5952 VHB tape for every 1 pound of load. Rough surfaces may require additional tape..
  • Carrier/Backing: closed-cell acrylic foam. Adhesive: modified acrylic. Release Liner: red PE film. Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 5 mils (liner)..
  • Adhesion: 320 ounces per inch (to stainless steel test panel). Tensile Strength: 90 pounds per inch (longitudinal). Service/Operating Temperature: up to 250F. Application Temperature: 50F to 100F. Core: 3-inch diameter..
Check Stock

3M 5958FR/BLK055 Scotch 5958FR VHB Tape: 1/2" x 15 ft, Black

  • 3M 5958FR VHB Tape is a flame retardant, very conformable, double-sided, pressure-sensitive, closed-cell acrylic foam tape with a PE film release liner. It bonds high, medium and medium/low surface energy substrates and provides handling convenience, cushioning, damping, and impact resistance..
  • Great for industries like aerospace where flame redundancy is often a requirement. It is part of the 3M 5952 family of VHB products which providing adhesion to the broadest range of substrates, including most powder coated paints..
  • Carrier/Backing: closed-cell acrylic foam (conformable). Adhesive: modified acrylic. Release Liner: red PE film (printed). Thickness: 45 mils (carrier, adhesive, liner) 40 mils (carrier, adhesive) 5 mils (liner)..
  • Adhesion: 320 ounces per inch (to stainless steel test panel). Tensile Strength: 100 pounds per inch (longitudinal). Service/Operating Temperature: up to 200F. Application Temperature: 50F (minimum)..
  • Density: 50 pounds per cubic foot. Dynamic Overlap Shear: 100 pounds per square inch. Short Term Temperature Resistance: up to 300F. Standards Met: FAR 25.853 (a) 12 second vertical burn, Appendix F, Part I (a)(ii).
  • Toxicity (Draeger Tube ABD0031, AITM 3.0005. Core: 3-inch diameter..
Check Stock

2 Inch STRONGHOLD - Hook and Loop Strip - Adhesive Backing - Fastener Tape - 5 Yard Set

  • ...TY MOUNTING TAPE: High quality 3M VHB strong double-sided foam tape provides excellent shear strength, conformability, surface adhesion and temperature resistance, And Creates a permanent seal against water, moisture and more by offering better gap filling capabilities,.
  • MATERIAL: vhb tape 3m double sided is made of Modified acrylic adhesive and very conformable acrylic foam core This provides an extraordinarily strong double-sided foam tape that adheres to a broad range of substrates..
  • HIGH STRENGTH BONDING: Heavy Duty Mounting Tape Bonds to a wide variety of substrates including aluminum, stainless steel, galvanized steel, composites, plastics, acrylic, polycarbonate, ABS and painted or sealed wood and concrete..
  • WIDE APPLICATIONS: The 3m vhb tape double sided is commonly used in applications across a variety of markets including transportation, appliance, construction, sign and display, and general Home & office Décor. Reliably bonds a variety of materials with strength and speed for permanent applications. Fast and easy-to-use permanent bonding method provides high strength and long-term durability..
  • STOP THE MESS: 3m vhb tape double sided black Can replace mechanical fasteners (rivets, welding, screws) or liquid adhesives, no more making holes in w....
Check Stock

2 Pack 3M 1 Inch Width 15 Ft Length VHB Tape 5952 Black Waterproof Foam Tape Heavy Duty Multipurpose Double Sided Tape for LED Strip Lights Home Decor Car Office Décor

  • Acrylic Tape: Permanent bonding tape with an extraordinary strength can be used to replace rivets, screws, spot welds, and messy liquid adhesives.....
  • Bonding Tape: Heavy-duty tape terminates drilling, grinding, welding, screwing, and refinishing associated with bonding and sealing materials..
  • Dimensions: Black 0.045 in (1.1 mm) modified acrylic adhesive, this listing is for [2] pack of [1] Inch Width and [15] Ft Length double-sided tape....
  • Durability: The black modified acrylic tape is resistant to UV light, moisture, solvents, and chemicals, ensuring perfect sealing and bonding even in....
  • Utility: 3M VHB 5952 tape is ideal for heavy bonding applications such as bonding glass and door, creating street signs, etc. This adhesive tape....
Check Stock

KORENJUL Acrylic Clay Roller Rolling Clay Bar Roll Stick Rod Rolling Pin for Shaping and Sculpting

  • ★ Acrylic clay roller: the clear clay roller in solid cylinder shape, the height is approx. 19.7 cm/ 7.8 inches, the diameter is 2 cm/ 0.8 inch,....
  • ★ Acrylic material: clay roller is made of acrylic material, sturdy and durable, easy to clean with soap and water..
  • ★ Clear acrylic roller with non-stick surface, help roll smooth.Simple and essential tool for clay projects..
  • ★ Application: acrylic clay roller matches, suitable for both home and school uses, good tools for shaping and sculpting, enjoy the fun of DIY..
  • ★ Quantity: 1 pieces acrylic clay roller, with smooth surface, easy to use, you can develop your imagination to DIY crafts..
Check Stock

American Standard 3060SH.RW 30-Inch By 60-Inch By 37-Inch Seated Shower with Drain, White, Right Hand

  • Kit Size: 32 in. D x 60 in. W x 76 3/4 in. H.
  • Base Installation: Direct to studs (Unfinished walls: Prior to backerboard, cement board, etc.).
  • SlipGrip textured floor surface for slip-resistance and safety.
  • Premium high gloss non-porous acrylic for easy maintenance.
  • Install against a solid surface, such as wonderboard/greenboard (not directly to studs).
  • SlimLine Base: Limited Lifetime Warranty.
  • QWall Backwalls: Limited One (1) Year Warranty.
  • Items included: 32 in. x 60 in. Single Threshold Shower Base and QWALL-5 Shower Backwall kit.
  • Overall dimensions: 32 in. D x 60 in. W x 76 3/4 in. H.
  • 32 in. x 60 in. Single Threshold Shower Base: scratch and stain resistant acrylic, cUPC certified, Drain is not included, Left drain configuration.
  • QWALL-5 Shower Backwall Kit: White color, Assembly required, Designed to be installed over existing solid surface not directly against the studs.
  • Trim-to-Size sidewall design, Must be trimmed during installation, Durable acrylic/ABS construction, Slip-resistant textured floor for safe showering.
  • Product Warranty: Shower Base: Limited lifetime manufactur....
Check Stock

WOODBRIDGE B0043 55 in. x 29.5 in. Luxury Contemporary Solid Surface Freestanding Bathtub, Matted White

  • ✅ [DIMENSIONS]: Exterior Dimension: (L) 55" x (W) 29 1/2" x (H) 22.0 x (D)15" Basin Seating Dimension: (L)39-5/8" x (W)20-1/8".
  • ✅ [SOLID SURFACE MATERIAL]: Made of premium acrylic resin (compound of PMMA and MMA) and fine quality aluminum powder..
  • ✅ [DURABILITY]: WOODBRIDGE solid surface bathtub is approx 1.8-2.5cm thick and unlike a thin acrylic tub’s fragile structure, it’s very durable. If taken good care of, It can be used for several decades..
  • ✅ [STAINS & SCRATCH RESIST]: Durable surface makes it extremely resistance to scratches and stains, if any imperfection occurs, it can easily be removed using extra fine sanding paper.
  • ✅ [RIGID & HEAVY DUTY]: Weight about 250 pounds make the tub so stable and no wobbling at any time..
  • ✅ [INSULATION]: Double ended solid walls carry maximum insulation and retain heat to keep water at its desired temperature longer than usual, create a unique bathing experience..
  • ✅ [EASY INSTALLATION]: Freestanding installation allow you to install on anywhere with a floor drain outlet.
  • ✅ [Package Included]:An industrial grade brass tailpiece. Two drain covers (matte white and matte black) for existing home decors matching.
Check Stock

WOODBRIDGE B0044 59 in. x 30.75 in. Luxury Contemporary Solid Surface Freestanding Bathtub, Matted White

  • ✅ [DIMENSIONS]: Exterior Dimension: (L) 59 " x (W) 30 3/4" x (H) 22 x (D)15" Basin Seating Dimension: (L)41-1/2" x (W)21".
  • ✅ [SOLID SURFACE MATERIAL]: Made of premium acrylic resin (compound of PMMA and MMA) and fine quality aluminum powder..
  • ✅ [DURABILITY]: WOODBRIDGE solid surface bathtub is approx 1.8-2.5cm thick and unlike a thin acrylic tub’s fragile structure, it’s very durable. If taken good care of, It can be used for several decades..
  • ✅ [STAINS & SCRATCH RESIST]: Durable surface makes it extremely resistance to scratches and stains, if any imperfection occurs, it can easily be removed using extra fine sanding paper.
  • ✅ [RIGID & HEAVY DUTY]: Weight more than 250 pounds make the tub so stable and no wobbling at any time..
  • ✅ [INSULATION]: Double ended solid walls carry maximum insulation and retain heat to keep water at its desired temperature longer than usual, create a unique bathing experience..
  • ✅ [EASY INSTALLATION]: Freestanding installation allow you to install on anywhere with a floor drain outlet.
  • ✅ [Package Included]:An industrial grade brass tailpiece. Two drain covers (matte white and matte black) for existing home decors matching.
Check Stock

DreamLine 30 in. D x 60 in. W x 76 3/4 in. H Left Drain Acrylic Shower Base and QWALL-5 Backwall Kit In White, DL-6189L-01

  • Kit Size: 30 in. D x 60 in. W x 76 3/4 in. H.
  • Base Installation: Direct to studs (Unfinished walls: Prior to backerboard, cement board, etc.).
  • SlipGrip textured floor surface for slip-resistance and safety.
  • Premium high gloss non-porous acrylic for easy maintenance.
  • Install against a solid surface, such as wonderboard/greenboard (not directly to studs).
  • SlimLine Base: Limited Lifetime Warranty.
  • QWall Backwalls: Limited One (1) Year Warranty.
  • Items included: 30 in. x 60 in. Single Threshold Shower Base and QWALL-5 Shower Backwall kit.
  • Overall dimensions: 30 in. D x 60 in. W x 76 3/4 in. H.
  • 30 in. x 60 in. Single Threshold Shower Base: scratch and stain resistant acrylic, cUPC certified, Drain is not included, Left drain configuration.
  • QWALL-5 Shower Backwall Kit: White color, Assembly required, Designed to be installed over existing solid surface not directly against the studs.
  • Trim-to-Size sidewall design, Must be trimmed during installation, Durable acrylic/ABS construction, Slip-resistant textured floor for safe showering.
  • Product Warranty: Shower Base: Limited lifetime manufactur....
Check Stock

DreamLine 32 in. D x 60 in. W x 76 3/4 in. H Left Drain Acrylic Shower Base and QWALL-5 Backwall Kit In White, DL-6190L-01

  • Kit Size: 32 in. D x 60 in. W x 76 3/4 in. H.
  • Base Installation: Direct to studs (Unfinished walls: Prior to backerboard, cement board, etc.).
  • SlipGrip textured floor surface for slip-resistance and safety.
  • Premium high gloss non-porous acrylic for easy maintenance.
  • Install against a solid surface, such as wonderboard/greenboard (not directly to studs).
  • SlimLine Base: Limited Lifetime Warranty.
  • QWall Backwalls: Limited One (1) Year Warranty.
  • Items included: 32 in. x 60 in. Single Threshold Shower Base and QWALL-5 Shower Backwall kit.
  • Overall dimensions: 32 in. D x 60 in. W x 76 3/4 in. H.
  • 32 in. x 60 in. Single Threshold Shower Base: scratch and stain resistant acrylic, cUPC certified, Drain is not included, Left drain configuration.
  • QWALL-5 Shower Backwall Kit: White color, Assembly required, Designed to be installed over existing solid surface not directly against the studs.
  • Trim-to-Size sidewall design, Must be trimmed during installation, Durable acrylic/ABS construction, Slip-resistant textured floor for safe showering.
  • Product Warranty: Shower Base: Limited lifetime manufactur....
Check Stock

DreamLine 34 in. D x 60 in. W x 76 3/4 in. H Left Drain Acrylic Shower Base and QWALL-5 Backwall Kit In White, DL-6191L-01

  • Kit Size: 34 in. D x 60 in. W x 76 3/4 in. H.
  • Base Installation: Direct to studs (Unfinished walls: Prior to backerboard, cement board, etc.).
  • SlipGrip textured floor surface for slip-resistance and safety.
  • Premium high gloss non-porous acrylic for easy maintenance.
  • Install against a solid surface, such as wonderboard/greenboard (not directly to studs).
  • SlimLine Base: Limited Lifetime Warranty.
  • QWall Backwalls: Limited One (1) Year Warranty.
  • Items included: 34 in. x 60 in. Single Threshold Shower Base and QWALL-5 Shower Backwall kit.
  • Overall dimensions: 34 in. D x 60 in. W x 76 3/4 in. H.
  • 34 in. x 60 in. Single Threshold Shower Base: scratch and stain resistant acrylic, cUPC certified, Drain is not included, Left drain configuration.
  • QWALL-5 Shower Backwall Kit: White color, Assembly required, Designed to be installed over existing solid surface not directly against the studs.
  • Trim-to-Size sidewall design, Must be trimmed during installation, Durable acrylic/ABS construction, Slip-resistant textured floor for safe showering.
  • Product Warranty: Shower Base: Limited lifetime manufactur....
Check Stock