Reviews Mining Rig Frame Gpu

SUOHUI GPU Mining Rig Complete System for Ethereum Classic ETC, ETH, RVN, Flux, Ergo Crypto Miner with 8 GPU Mining Motherboard,PSU, RAM,SSD, Stackable Mining Frame Machine(Without GPUs)

  • 【Stackable Frame Mining Machine】: This mining frame is made of high-quality material, reinforcing the mobo with14 screws to protect it from being overshaped. The open-air frame ensures that the graphics card is not limited in length. You can easily stack multiple SUOHUI mining rigs at will without covering too much space..
  • 【8 GPU Mining Motherboard】: Our mining rig has installed a 8 GPU slots mining motherboard with SSD,RAM,CPU. 65mm spacing provides enough space between GPUs, suitable for AMD/NVIDIA GPUs. Note: The width of GPUs should not exceed 65mm..
  • 【1800W Stable Mining Power Supply】:This mining power supply uses 4U PSU rated output 1800W 12V full-voltage, can work under (110-220v）.10 long-line cables with 16x8 (6+2) pins and 6x6 pins, which can powers the mobo and GPU directly. Effectively improve conversion efficiency and reduce power loss..
  • 【4*4500rpm Silent Cooling Fans】4*4500rpm GPU cooling fans, professional silent design with adjustable fan speed controller, fully accelerating airflow to achieve the ultimate cooling effect. Let you easily enjoy the fun of mining at home..
Check Stock

DAYLEAD Mining Rig Case 8 GPU Mining Case with Mining Motherboard Support 8 Cooling Fans(4 Preinstalled) for BTC/ETH/ZEC GPU Mining Rig (Without GPU, PSU)

  • 【8-Port Ming Rig Frame】The mining rig frame has 8 GPU ports, which means you can install 8pcs of GPUs on the motherboard at the same time. We have also tested the rig with various GPUs to ensure that it’s compatible with a wide range of graphics cards. Please note that only the same type of GPUs can be installed at the same time..
  • 【8 Cooling Fans Supported】The mining rig case support 8 cooling fans. It is equipped with 4*120mm Silent cooling fans and 2* fan speed controller. More quite, accelerating the air convection, excellent heat dissipation performance, keep the graphics card running at high performance. Add 1*80mm CPU cooling fan..
  • 【A stable machine】The 8 GPU mining rig frame is made of high-quality steel, strong, durable, and available for repeated addition, Easy to set up, It’s a stable machine that’s incredibly easy to set up and requires little maintenance, making it an ideal rig for mass scaling..
  • 【Low Consumption】The consumption of the GPU mining rig system is less than 150watt. Supports Windows10/LINUX operation system..
  • 【Kindly Note】New version of mining case MC03 suitable for most of the mining case power supplies on the market (1U, 2U, ATX). You need to purchase and install your own PSU, Hard drive, and GPU to wo....
Check Stock

8 GPU Mining Rig, Complete Ethereum Crypto Miner Mining Machine System Case with 4U 2000-3000W Power Supply ＆ 8 Cooling Fans, ETHW/ETC Miner Frame with Motherboard/CPU/Windows System (Without GPU)

  • √【100% Guarantee】We provide 24-hour customer support. If you encounter any problems or the goods you receive are damaged, please feel free to contact us and we will solve your problems in time. If you are not satisfied for any reason you can return the mining rig case for a full refund. We can offer a 30-day money-back guarantee..
  • √【Ultra-quiet 8 GPU Mining Rig】It is designed for cryptocurrency mining.The mining machine system comes with 2000-3000W (The power is 2000W when the voltage is 110V, and the power is 3000W when the voltage is 220V.) professional Low Decibel mining machine power supply, suitable for home use. Equipped with multiple power protections to provide your system with a more reliable and stable output voltage, providing more consistent power delivery..
  • √【8 GPU Slots】The mining machine system case comes with 8 GPU interfaces, and the GPU interface spacing is about 65mm. Enough spacing to ensure good heat dissipation is a necessary condition for mining any cryptocurrency. Allowing you to enjoy mining without any adjustment, with super high work efficiency..
  • √【8 Fans Support & Fan Controllers】 The cryptocurrency mining rig case is equipped with 8 PCS quiet cooling fans. 4 fans pull the air in and other 4 fans in th....
Check Stock

Mining Rig Case 8 GPU Mining Case with 8 Powerful Cooling Fans and Mining Motherboard (Without GPU, PSU) for ETH/ZEC GPU Mining Rig Cryptocurrency System Machine

  • 【8-Port Ming Rig Frame】The mining rig frame has 8 GPU ports,and the GPU interface spacing is about 70mm. You can install 8pcs of GPUs on the motherboard at the same time. It’s compatible with a wide range of graphics cards..
  • 【8 Powerful Cooling Fans】The mining rig case include 8 powerful cooling fans. More quite, accelerating the air convection,the design of one air volume in and one out with more space keep the graphics card running at high performance..
  • 【Safe and Effective】The low power consumption, reduce heat generation, energy-saving, and safe use. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc..
  • 【Mining rig case Including】 motherboard, CPU, power switch line, 4G RAM, 3000 rpm cooling fan * 4, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package..
  • 【Tips】The GPU miner machine system doesn't come with GPU or PSU. You need to install your own power supply Hard drive, and GPU to work normally. Please feel free to contact us if you have any questions..
Check Stock

8 GPU Mining Rig Frame with Mining Motherboard/SSD/RAM/CPU/Cooling 4 Fans ,Crypto Ethereum Mining Rig Case 8 GPU Slots for Cryptocurrency Bitcoin/Crypto ETH Miner (Without GPU and PSU)

  • 【Mining Rig Frame 】:It is specially designed for cryptocurrency mining (Monero/Ethereum/Ripple/Zerocoin/other)，with 8 GPU slots (but without GPU), has 4 USB ports and 1 VGA ports.Support single power supply(Two cables of the power supply are connected to the motherboard, and the remaining eight cables are connected to the GPU. The power supply can directly supply power to the GPU, and there is no need to supply power to the GPU from the motherboard. ).
  • 【8 GPU -16X Slots】: 8* Pcie 3.0 slots on mining motherboard.The spacing between each GPU slot is 65mm (about 2.56in)，gives the GPU enough space for air circulation and prevents the GPU from overheating.The size of case fits most video cards.(Except 3060,because 3060 GPU need dedicated motherboard)..
  • 【Upgrade Material】：Our mining GPU frame case is made of high-quality steel, the surface is flat and smooth, and the internal space is large. The internal motherboard design is great, the overall size of the chassis is 27.55in*15.75in*6.69in..
  • 【ETH Mining rig case Including】:motherboard, Intel CPU (with CPU cooling plate*1), power cord, 128GB mSATA SSD, 4G DDR 3, 5200 rpm cooling fan * 4, 8*(6+2)Pin graphics power cable (motherboard and fan power,all cables are 12V),screws*12, power switch....
Check Stock

MLLIQUEA 847 Mining Motherboard, 8 GPU Slots Mining Machine System, Cryptocurrency Miner Barebone Motherboard for BTC/ETH/ZEC with SSD, RAM

  • 8 GPU Ports - The mining machine system comes with 8 GPU interfaces, and the GPU interface spacing is about 65mm. 8 GPUs can be installed on the motherboard at the same time. The actual work done for you is lasting and rewarding. This motherboard is adapted to the mining rig frame customized for B85/847 sold in our store..
  • Upgrade Material - Our mining GPU motherboard is made of high-quality steel, which is sturdy and durable, and can be reused. One large CPU cooling plate, super heat dissipation. You can install your own external cooling fan, fast heat dissipation to ensure your normal use. Can fully protect your GPU and electronic equipment from damage. Excellent equipment design to improve GPU performance. It is recommended that you buy MLLIQUEA 2000W PSU, which is sold in our store, more efficient mining..
  • Safe and Silent - It can ensure silent performance, low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Bitcoin (BTC), Ethereum (ETC), and any other cryptocurrency..
  • Eth Mining Rig - Motherboard: LGA(1150) CPU(with CPU radiating plate), 128GB SSD (Installed), 4G RAM, 6 PIN cable to (6 + 2) Pin 8pcs. Note: The hard disk is not equipped with a system. After you log in to the official website of the s....
Check Stock

8 GPU Mining Rig Frame Case - Complete Mining Rig System for Cryptocurrency Ethereum Miner with 1800W/2800W Power Supply(176V-260V), Motherboard, CPU, RAM, SSD, 8 Adjustable Speed Fans (Without GPU)

  • 【Built in 1800W Power Supply】The mining machine system comes with 1800W (176V-260V) professional Low Decibel mining machine power supply (It will not work under 110V household voltage), the decibel is about 50dB, suitable for home use. Up to 90% power conversion efficiency, allowing you to enjoy mining and save your power consumption at the same time..
  • 【8 GPU slots】8 GPU slots in the mining rig frame case, and the 65mm gap between GPU ports makes it quieter and easier to cool. The mining case support 8 PCS 3060TI/3070/6800/6800XT 6900/6900XT GPU simultaneously. But It is recommended to run only 4 PCS 3080,3090. Note: GPU longer than 32 cm in length are unavailable..
  • 【8 Adjustable Speed Fans】The mining computer case is equipped with 8 PCS cooling fans.The design of one air volume in and one out, the air volume is sufficient and silent enjoyment, escort your graphics card. Fan controller can control the fan speed from 2500 to 4500 rpm, rotate the fan controller to the right to increase the speed..
  • 【Mining rig Including】Our 8 GPU mining rig frame includes 1800W Mining power supply, motherboard, Intel CPU, 128GB SSD, 4G RAM, 2500-4500 rpm cooling fan * 8, screws package. Note: The hard disk is not equipped with a system. After you log in to ....
Check Stock

WOOCHOO Mining Rig Frame - 6/8 GPU Steel Open Air Miner Computer Case for Crypto Coin Currency Bit ETH ETC ZEC Accessories Tools，（Fans & is not Included） black 53.4 x 29 4.4 cm

  • 【Slot】6/8 GPU slots. (GPU is not included). The length of the graphics card is unlimited..
  • 【High Quality Material】- The frame was made of high quality material, with the finest craftmanship. Strong & durable, fully protection to your....
  • 【Perfect Design】Perfectly fit ATX motherboards, up to 8 graphics cards, hard drives, and power supplies. Professional design for mining rig frame,....
  • 【Easy to install】- The Open Air Miner Mining Frame Rig Case has precise screw holes and easy installation. You can quickly complete the layout of....
  • 【Notice】This mining rig frame is the Frame Only, not includes Fans or other CPU, GPU, PSU, Motherboards, Cables. If you are not 100% satistifed....
Check Stock

Fanhasi 8 GPU Mining Rig Frame Case for ETH Crypto Miner with 8 GPU Mining Motherboard & 2000W Power Supply & 128GB SSD & 4G RAM & 8 Cooling Fans (Without GPU)

  • 8 GPU Slots Mining Rig System: Designed for Ethereum miner, you can put at most 8 Pcs GPU cards in the mining case. 65mm gap between each GPU ports gives the video cards enough space for air circulation for cooling. It's fit for most GPU card except 3060. NOTE: GPU cards are NOT Included.
  • 110V - 264V Input Power Supply: Built in 2000W PSU is designed for mining rig with up to 90% conversion efficiency. 110V - 264V universal AC input design allows you to enjoy mining at home easily. Without any modifying, it can work at a household voltage of 110V..
  • 8 Pcs Powerful Cooling Fans: This ETH mining rig case comes with 8 PCS adjustable cooling fans which help to accelerate air convection and keep the GPU card working at high performance. With the help of controller, you can control the fan speed to reduce the noise..
  • Case Type Mining Machine: The Ethereum miner case is made of high quality steel material which is sturdy and durable, can fully protect your GPU and electronic devices from damage. NOTE: GPU cards which are longer than 12.6 inch / 32cm in length are UNAVAILABLE for this mining rig..
  • Mining Rig Including: B75 motherboard, 2000W Supply Power (110V - 264V input ), CPU, 128GB mSATA SSD, 4G DDR3, 8 PCS 4500 RPM cooling fans. (NOTE: GPU cards are NOT Inc....
Check Stock

VTRETU GPU Mining Rig， Ethereum Classic Crypto Miner ，with 8 GPU Mining Motherboard and 2000W Power Supply（110-264V） 8 Cooling Fans ，SSD,RAM，CPU,Windows 10(Excluding GPU) White

  • 【VTRETU Complete Crypto Mining Rig 】: the mining case is made of high-quality steel material that is sturdy and durable. It can fully protect the GPU and electronic devices from damage. designed for cryptocurrency mining –Monero, Ethereum,ETC, Ripple, Zerocoin, Litecoin ，Dogecoin ，etc. NOTE: GPU cards which are longer than 12.6 inches / 32cm in length are UNAVAILABLE for this mining rig.
  • 【Adapt to universal voltage 】: Inbuilt 2000W Quiet power is designed for mining rigs with up to 90% conversion efficiency. 110V – 264V universal AC input design， supports 8 GPU to work at the same time， allows you to enjoy mining without any adjustment. It can work at a household voltage of 110V save your power consumption at the same time.
  • 【8 GPU Mining Motherboard】: Intel-B75 mining motherboard.The 65mm distance gives the GPU enough space for air circulation and prevents the GPU from overheating.The size of case fits most video cards.(Except 3060,need dedicated motherboard).
  • 【8 Powerful Fans 】 : This mining rig case is equipped 8*4500rpm cooling fan, 4 (Air in) + 4 (Air out),so it can accelerate air convection to keep the graphics card running at high performance. And with wind speed regulator, can reduce the temperature of the mainboard an....
Check Stock

VTRETU Ethereum GPU Mining Rig with 8 GPU Mining Motherboard and 2000W Power Supply110-264V 8 Cooling Fans for Crypto Mining Rig Complete ETH Miner (Excluding GPU), black (V01)

  • ?VTRETU Complete Crypto Mining Rig ?: the mining case is made of high-quality steel material that is sturdy and durable. It can fully protect the GPU and electronic devices from damage. designed for cryptocurrency mining -Monero, Ethereum, Ripple, Zerocoin, Litecoin ,Dogecoin ,etc. NOTE: GPU cards which are longer than 12.6 inches / 32cm in length are UNAVAILABLE for this mining rig.
  • ?Adapt to universal voltage ?: Inbuilt 2000W Quiet power is designed for mining rigs with up to 90 percent conversion efficiency. 110V - 264V universal AC input design, supports 8 GPU to work at the same time, allows you to enjoy mining without any adjustment. It can work at a household voltage of 110V save your power consumption at the same time.
  • ?8 GPU Mining Motherboard?: Intel-B75 mining motherboard.The 65mm distance gives the GPU enough space for air circulation and prevents the GPU from overheating.The size of case fits most video cards.(Except 3060,need dedicated motherboard).
  • ?8 Powerful Fans ? : This mining rig case is equipped 8 x 4500rpm cooling fan, so it can accelerate air convection to keep the graphics card running at high performance. And with wind speed regulator, can reduce the temperature of the mainboard and GPU working environment effectively.
Check Stock

Foyozisun GPU Mining Rig Complete System Ethereum ETC Crypto Miner with 8 GPU Mining Motherboard and 1800W Power Supply 8G RAM (Without GPU)

  • Mining Rig Complete System: Stackable open frame Complete System, Specially designed for crypto mining -ETH,ETC,FLUX,REGO,Ravencoin,Monero, Dogecoin, etc.supports Win10, Linux, hiveos (spark), nicehash, minero (os) and other operating systems..
  • 8 GPU Mining Motherboard: Intel-B85 mining motherboard.The 65mm distance gives the GPU enough space for air circulation, suitable for RTX3060, 3070, 3080, 3090, 6600, 6700, 1660s/2060 and other AMD/NVIDIA GPUs..
  • 1800w Quiet Supply Power: Both 110V and 220V can be used. easy to setup and very quiet..
  • Arrived fast : We ship from the amazon FBA warehouse in thEasy&Fast installation in 30 minutes with video detailed guide.Instant gratification!.
  • GPU Mining rig Including :B85 motherboard, 1800W Supply Power , CPU,128GB mSATA SSD, 8G DDR 3, 3000 rpm cooling fan * 4. win10 system (not activated) Without GPU. For any questions, please feel free to contact us.We will provide professional technical support..
Check Stock

Kingwin Bitcoin Miner Rig Case W/ 6 GPU Mining Frame - Expert Crypto Mining Rack W/ Placement for Motherboard for Mining - Air Convection to Improve GPU Cryptocurrency Test Bench PC Case

  • ✅ OPEN AIR FRAME - Our high performance rig case comes with 4 fan slots for cooling (fans not included). Excellent equipment design to improve GPU....
  • ✅ DURABLE QUALITY - This stainless steel mining case is high durable to fit up to 6 GPUs. This material is durable to support any bitcoin mining....
  • ✅ HIGH POWERED - This mining rig has motherboard compatible power supply mounting (power supply not included) This crypto mining rig is an easy rig....
  • ✅ MUTLI COMPATIBILITY - This mining rig frame can support SSD & HDD installation with enough space between GPUs, for sufficient air flow. This is a....
  • ✅ GUARANTEED QUALITY - Bitcoin mining machine is guaranteed quality and performance or your money back..
Check Stock