Reviews Miniature Signal Isolators

850MHz CDMA Mobile Repeater for 3G/4G Verizon Cell Phone Signal Repeater Booster Amplifier Extender+Yagi kit

  • - The repeater works with two antennas (included in the kit). One is the indoor antenna which communicates with your cell phone or laptop data card, and another one is the outdoor antenna which communicates with the cell tower..
  • - When the indoor antenna receives the signal from your cell phone or data card, the booster amplifies the signal and transmits it through the cable to outdoor antenna and then to the cell tower. And the better the outside signal, the more coverage the indoor antenna can create..
  • - The miniature repeater with its unique compact, light weight, easy installation, small interference on the network, the reliability and stability of the unique advan-tages, has been widely, especially suitable for the modern city building area indoor coverage..
  • - The miniature repeater is mainly used in office buildings, shop-ping malls, large underground parking field, exhibition center, workshop. Signal using a small power cover-age within building will be more uniform, reduce the cost of inputs..
  • - Outdoor Yagi antenna receives the downlink signal from the base Station, and the mini wattage repeater amplifies the signal. The indoor retransmission antenna will transmits signal, covering user's home or office..
Check Stock

WINUS Cell Phone Signal Booster, Amplifier Repeater Yagi Antenna Kit 3G 4G 850MHz CDMA Repeater Cell Phone Enhance 3G GSM Signal for Home and Office

  • ★The repeater works with two antennas (included in the kit).
  • ★The miniature repeater is made in aluminum which could help reduce the attenuation in signal transmission and radiation.
  • ★The area of signal amplification is about 100-150 square meters.
  • ★There is no need to worry missing phone calls or network off-line.
Check Stock

Isolate IT Lavalier Microphone Isolation Shield System for Sanken COS-11 (Black)

  • FOR LAVALIER MICROPHONES: This lightweight mic isolator is designed to fit Sanken COS-11 lavalier microphones. To install, insert the lavalier wire while flexing the isolator open and then slide the microphone down into the cavity..
  • COMPACT ISOLATION: This isolation device is made with a Sorbothane lining that can absorb up to 94.7% of vibration noise and energy while in use. This mic isolator can also reduce noise from mic hits, rustling clothes, and other unwanted sounds..
  • SAFE TO USE: These heavy-duty isolators are safe to use on all materials and can be attached directly to the skin. To fix onto fabric, skin, or other materials, attach the isolator to an adhesive, like a sticky piece of tape, to ensure a sturdy hold..
  • OPTIMAL SOUND QUALITY: Thanks to its slim, contoured design, this miniature mic isolation adapter can provide crisp, quality audio when attached to all types of garments and between layers of clothing..
  • PROFESSIONAL AUDIO RECORDING: This portable lav filter can be used to provide high-quality sound for an interviewer, reporter, broadcaster, presenter, podcaster, and anyone else in a field that requires up-close, quality sound..
Check Stock

NATGAI Steel Spring Hanger Vibration Isolator for A/C Air Handler Bedroom Theater Studio, 110 Lb Capacity, 1.20\ Deflection

  • High Quality: By using 3mm thick steel, high quality spring and silicon material, this product provides high efficiency in absorbing vibration, it is fully matched to requirements of interior decoration..
  • Specification: 100mm*45mm*50mm or 4''*1.8''*2''.
  • Weight: 0.4kg. Material: steel & rubber. Max load: 50kg (110lbs).
  • The recommended distance of each two isolators is 24 inch, e.g. 63~99 isolators are needed for a room aera of 215~322 sq ft.
  • Easy To Install: The base has 1 bolt hole on base for rigid mounting when used for supporting machinery, easy installation on ceilings, floors, walls, ducts, etc..
  • Wide Application: : The shock absorber can be used in bedroom, studios, home theaters, houses, hotels, bars, karaoke room etc. Can be mounted to ceilings, walls, pumps..
  • Package Included: 4 x 110 Lb capacity spring vibration isolators.
Check Stock

ButtKicker BK-CMAK Couch/Chair Mounting Accessory Kit

  • Easy-to-use kit simplifies installation of your ButtKicker LFE.
  • Allows ButtKicker LFE to be placed simply and securely on whatever furniture you are going to be using.
  • Attaches directly to the leg of your couch or chair, while sitting on rubber isolators.
  • Includes five additional rubber isolators, drastically improving the performance of your ButtKicker LFE.
  • Kit comes with all the necessary mounting hardware, and a handy wrench.
Check Stock

MAOPINER 4Pack Ceiling Vibration Damping Mounts, Spring Vibration Isolator for Soundproof and Shockproof for A/C Air Handler Bedroom Theater Studio, 110 Lb Capacity, 1.20\ Deflection

  • Premium Material: The red part of the ceiling vibration damping mounts is made of silicon instead of rubber, better functioning in absorbing vibration. And also the silicon applied is qualified, safe and environmentally friendly material..
  • Specification: 100mm*45mm*50mm or 4''*1.8''*2''.
  • Weight: 0.4kg. Material: steel & rubber. Max load: 50kg (110lbs).
  • The recommended distance of each two isolators is 24 inch, e.g. 63~99 isolators are needed for a room aera of 215~322 sq ft.
  • Easy To Install: The base of the mechanical vibration damping pads has 1 bolt hole on base for rigid mounting when used for supporting machinery, easy installation on ceilings, floors, walls, ducts, etc..
  • Wide Application: : The shock absorber can be used in bedroom, studios, home theaters, houses, hotels, bars, karaoke room etc. Can be mounted to ceilings, walls, pumps..
  • Package Included: 4 x 110 Lb capacity spring vibration isolators.
Check Stock

Philips 194CVB2 194 CrystalVision Ultra Miniature Bulb 2 Pack

  • Choose Philips CrystalVision ultra miniature bulbs for your turn signal, side marker and tail lights..
  • Miniature bulbs by Philips, for over 100 years we have been continuously innovating automotive lighting.
  • Always replace in pairs to ensure a symmetric light beam from both bulbs on the road. Bulbs dim over time..
  • When installing a new bulb, never touch the glass. Either use gloves or paper towel when handling..
Check Stock

Philips 3057CVB2 3057 CrystalVision Ultra Miniature Bulb, 2 Pack

  • Choose Philips CrystalVision ultra miniature bulbs for your turn signal, side marker and tail lights..
  • Miniature bulbs by Philips, for over 100 years we have been continuously innovating automotive lighting.
  • Always replace in pairs to ensure a symmetric light beam from both bulbs on the road. Bulbs dim over time..
  • When installing a new bulb, never touch the glass. Either use gloves or paper towel when handling..
Check Stock

Philips 7443CVB2 7443 CrystalVision ultra Miniature Bulb 2 Pack

  • Choose Philips CrystalVision ultra miniature bulbs for your turn signal, side marker and tail lights..
  • Miniature bulbs by Philips, for over 100 years we have been continuously innovating automotive lighting.
  • Always replace in pairs to ensure a symmetric light beam from both bulbs on the road. Bulbs dim over time..
  • When installing a new bulb, never touch the glass. Either use gloves or paper towel when handling..
Check Stock

MuHize Black D-Ring Shackle Cover 2 Pcs Shackle Isolator and 4 Pcs Washer, Isolators Washers Kit Fits 3/4 inch Shackle Gear Design Rattling Protection (Pack of 2)

  • PACKAGE INCLUDED - MuHize 2Pcs black D-ring shackle isolators + 4 Pcs black washers kit. Perfect fit for standard 0.75" or 3/4" D-Rings or Shackles with 7/8" screw pin..
  • EASIEST DIY FOR BUMPER - The shackle isolators and washers are one of the DIY necessities of the off-road trail or everyday driving. The quality shackle isolators can both protect Wrangler or pickup bumper finishes from damage and make it look cool after DIY modification..
  • EASY TO INSTALL - No Screws or drilling are required. And the washers can reduce rattling noise when the vehicle is in motion..
  • DURABLE MATERIAL - MuHize isolator & washers are specific for durable rubber material, which can prevent shackles from crack, warp or corrode effectively..
  • HIGH QUALITY - Perfect bending can be matched with 3/4 inch D-ring shackle. Accurate design. It can be used as a buffer to effectively protect the bumper..
Check Stock

Philips 12498CVB2 P21W CrystalVision ultra Miniature Bulb, 2 Pack

  • Choose Philips CrystalVision ultra miniature bulbs for your turn signal, side marker and tail lights..
  • Miniature bulbs by Philips, for over 100 years we have been continuously innovating automotive lighting.
  • Always replace in pairs to ensure a symmetric light beam from both bulbs on the road. Bulbs dim over time..
  • When installing a new bulb, never touch the glass. Either use gloves or paper towel when handling..
Check Stock

Flair Electronics Recessed Contact, Wire Leads, VIP94-2 (10 Pack)

  • 5 Brown ABS Normally Closed Miniature Door Contact Switch 5/8 by 3/8 with 11" pigtail.
  • Will Sense Door Closer at Roughly 1/2” or 10mm.
  • This Contact Works with Any Access Control or Burglar Alarm System Available.
  • NORMALLY CLOSED: When the door or window is open, the contact will give an open signal and when the door is closed the contact will give a closed (circuit) signal..
Check Stock

DYNWAVE 50cm X 6063 Aluminium Alloy Al Si, 8mm

  • 1 White ABS Normally Closed Miniature Door Contact Switch 5/8 by 3/8 with screw terminals to terminate alarm system wires.
  • Will Sense Door Closer at Roughly 1/2” or 10mm.
  • This Contact Works with Any Access Control or Burglar Alarm System Available.
  • NORMALLY CLOSED: When the door or window is open, the contact will give an open signal and when the door is closed the contact will give a closed (circuit) signal..
Check Stock