Reviews Miniature Metal Wind Turbines

FLTXNY POWER Lithium Battery 1600W Wind Solar Hybrid Charge Controller with Wind Generator MPPT Boost Charging Function, 1000W Wind 600w Solar with Dump Load, for Off Grid Wind Solar Hybrid System

  • Wind and solar hybrid input or independent input of solar or wind energy, the wind for AC or DC wind.
  • MPPT charging mode ensures maximum power input battery and high charging efficiency.
  • Can be used in 1000W wind turbines with high compatibility..
  • Independent boost circuit, solve the charging efficiency problem of low power vertical wind turbines..
  • LCD displays parameters such as voltage and current of wind, solar and load ..
Check Stock

Cover Turbine Roof Vent

  • Fits 12" turbines with external support structure.
  • Fits 14" turbines with internal support structure.
  • Protects the turbine from rain, snow, wind and dirt.
  • Fabric is breathable to resist mildew and mold.
  • Heavy duty grommets and tie-down string allow for easy installation and durability.
Check Stock

Focket Wind Turbine, NE-300S3 300W DC 12V/24V High Conversion Rate Wind Turbine Generator Kit 630mm 3 Blades Charge Controller Power Windmill High Utilization for Home Power Supplementation(12V)

  • ...otor adopts unique magnetic circuit design, and its starting torques is very small, which can effectively guarantee the starting ability of breeze.The use of casing connection, is high safety, no flying phenomenon. Using imported bearing, high working efficiency, wear-resistant, durable, can be up to 15 years..
  • Wind turbines has light weight, small size, and shape is better than similar products.The design of wind turbines leaves accords with the aerodynamic principle.The wind wheel runs smoothly, reliably and quietly.The magnet USES rare earth ndfeb permanent magnet, high efficiency and light weight, less energy consumption, high output power..
  • The leaves is made of high strength nylon composite material with high strength, good toughness, uv protection, corrosion protection and wind resistance. It has good aerodynamic performance and unique wind stall protection characteristics. The mould is formed by pressing the shaft once, the weight error is small, the production efficiency is high..
  • The leaves are synthetic injection molded with high strength plastic, 30% carbon fiber components , and anti-ultraviolet and anti-corrosion materials.With class H high temperature resistant bubble line, resistant to high temperature 180℃..
Check Stock

Turbine Roof Vent Cover, Heavy Duty Turbine Ventilator Protector Shield, Waterproof 1680D Oxford Fabric, Adjustable Drawstring Design, Year Around Protection for Your Roof Vent (S: 12

  • Value Package Meal: 1 Pack Versatile Roof Ventilator Cover+ 24 hours customer email service+ 100% satisfaction guarantee. Love your turbine roof weather bag or get your money back with no question asked..
  • Durable Roof Cover: Made of high quality oxford, lightweight, durable, waterproof , dustproof and windproof for life time using..
  • Protective Turbine Roof Cover: A necessary weather turbine protective bag you ever need it for your turbine roof vent. Protects turbines from rain, snow, wind and dust. It also reduces home heat loss..
  • Universal Ventilation Cover Size: diameter x height (S: 12" x 17.5", L: 20 "x20"). Fits 12"or 20" turbines with external support structure..
  • Easy To Install And Take Off Roof Vent Cover: The roof vent cover is easy to use. Heavy duty grommet and tie rope for easy installation and durability.Elastic rope below to increase the stationarity and will not be blown away by wind..
Check Stock

Xantrex C60 Solar Charge Controller 60 Amps

  • Compatible with 12 and 24 volt battery banks (Charging/dumping voltage setting are user settable).
  • Works with wind turbines, solar panels and hydro generators.
  • 100% solid state controller (no mechanical relays or solenoids).
Check Stock

Xantrex C35 Solar and Wind Turbine Charge Controller

  • Compatible with 12 and 24 volt battery banks (Charging/dumping voltage setting are user settable).
  • Works with wind turbines, solar panels and hydro generators.
  • 100% solid state controller (no mechanical relays or solenoids).
Check Stock

24 Volt 300 Watt 8 5/16 Inch DC Submersible Water Heating Element

  • Curved water heating allows faster heating with more surface area.
  • Can be used with wind turbines and solar panels.
  • Can be connected as 24 Volts 300 Watts or 12 Volts 80 Watts.
  • Standard American water heater element replacement for on or off grid applications.
Check Stock

WOLF HANDPIECES WPL-KV-MEDL Wolf Platinum Label Kavo Type Standard Head Fiberoptic, Air

  • The hub groove and the blade are tightly designed to make the matching between the blade and the hub more precise.
  • The built-in copper sleeve insert of the blade does not damage the nylon fiber when the bolt is tightened, making it difficult to deform or break.
  • The wind turbines uses a flange connection to make it safer and more reliable.
  • High wind energy conversion rate, increasing annual power generation.
  • The surface of the hub is oxidized to make the surface less prone to corrosion and durable.
Check Stock

48 Volt 600 Watt 8 5/16 Inch DC Submersible Water Heating Element

  • Curved water heating allows faster heating with more surface area.
  • Can be used with wind turbines and solar panels.
  • Standard American water heater element replacement for on or off grid applications.
Check Stock

Dyna-Living Wind Turbine Generator Kit 400W DC 12V Wind Turbine Motor 3 Blades Wind Power Generator with Charge Controller for Home Marine Industrial Energy(Not Included mast)

  • ...en. The working temperature is -40 ° C ~ 80 ° C, do not worry about the temperature being too low and causing the leaves to freeze..
  • [Unique Design]- The wind turbine generator adopts a permanent magnet rotor alternator and with a special kind of stator design, efficiently decreases resistance torque. And the wind turbines match the generators quite well, the blade is designed with aerodynamics to make the rotor run smoothly, quietly and with high wind energy utilization factor..
  • [Wide Application]-This wind turbine generator is easy installation and maintenance, which is suitable for the leisure sector and is known for charging batteries for boats, gazebos, cabins or mobile homes, as well as for green windmills, home, corporate and industrial energy supplements!.
Check Stock

DROK DC 24V to 12V CC CV Step Down Volts Regulator Constant Current Voltage 8A DC Adjustable Buck Converter 7-40V to 1.2-35V LED Driver Charger Module with Charging Indicator Solar Power Supply DIY

  • Module Properties: non-isolated step-down constant current , constant voltage module (CC CV) charging module.
  • Output voltage :DC 1.2-35V continuously adjustable.
  • Output Current: 8A ( when power tube's temperature exceeds 65 degrees, please add cooling fan ).
  • Constant current range :0.2-8A ( adjustable ).
  • Input 24V Output 12V 5A ripple around 50mV ( excluding noise ).
  • Application: High-power LED constant current driver, rechargeable lithium batteries (including ferroelectric), 4V, 6V, 12V, 14V, 24V rechargeable batteries, nickel-cadmium nickel-metal hydride batteries (battery pack) charging, solar panels, wind turbines.
Check Stock

4Pack Turbine Roof Vent Cover Turbine Ventilator Protector Shield 20\x20\inches(51cm51cm) Waterproof Oxford Tarps Adjustable Drawstring Design

  • [Suit for Most Turbine Ventilator]: The Roof ventilator cover size is: 20D x 20W inch(50D x 50W cm) suit for most of roof cover..
  • [Waterproof Material]: Window air conditioner cover are made of high quality waterproof oxford cloth, better waterproof effect, washable and durable..
  • [Drawstring design]:Outside units Air conditioner protection cover has a adjustable drawstring in the bottom, make the cover not easy being falling due to wind, easy to put on and take off..
  • [Dustproof and Waterproof]: A necessary weather turbine protective bag you ever need it for your turbine roof vent. Protects turbines from rain, snow, wind and dust. It also reduces home heat loss..
  • [Quality Guarantee]: If you have any question or feel unsatisfied of our turbine ventilator cover, please contact us at any time, we promise to provide free replacement or full refund..
Check Stock

2 Pack Turbine Roof Vent Cover,Turbine Ventilator Protector Shield 20\x20\inches(51cmx51cm) Waterproof Oxford Tarps Adjustable Drawstring Design

  • [Suit for Most Turbine Ventilator]: The Roof ventilator cover size is: 20D x 20W inch(50D x 50W cm) suit for most of roof cover..
  • [Waterproof Material]: Window air conditioner cover are made of high quality waterproof oxford cloth, better waterproof effect, washable and durable..
  • [Drawstring design]:Outside units Air conditioner protection cover has a adjustable drawstring in the bottom, make the cover not easy being falling due to wind, easy to put on and take off..
  • [Dustproof and Waterproof]: A necessary weather turbine protective bag you ever need it for your turbine roof vent. Protects turbines from rain, snow, wind and dust. It also reduces home heat loss..
  • [Quality Guarantee]: If you have any question or feel unsatisfied of our turbine ventilator cover, please contact us at any time, we promise to provide free replacement or full refund..
Check Stock